Argent Audio
144 topics in this forum
-
Whats up... I planned on having a box built for my BL back around june but just went with a prefab box at my local shop which was a BAD idea. Cant stand how it sounds honestly and finally would like to switch it out for something tuned lower and slightly bigger. Car is an 08 scion tc, the trunk is extremely small so these measures are the absolute max for a box (including carpet/baffle etc..) Height= 17.25 Depth (front to back)= 16.65 Width (across)= 31.80 Its a hatch trunk and it curves around the corner so thats the biggest size box that can fit I believe. Considered doing Sub up port facing the rear to have a bigger box but I think i will play it safe and continue to h…
-
0
Reputation Points
- 2 replies
- 1.4k views
-
-
Vehicle Make and Model: 94' Honda Accord Direct of Box/Subs: not sure what this means Sealed or Ported: Ported Number of Subs: 2 Brand and Model of Subs: SSA DCON 10" Max Dimensions: If you mean trunk space of the car I measured the best I could and came up with.. Height: 19 in Width: 52 in Depth: 38 in Port Color: Black Flush Mount Ring Color : Black Carpet Color: Charcoal Zip Code for Shipping Quote: 98387 Any other notes: I would also like a flush mount, double baffle, 45's in the corners, rounded edges and tuned to 30hz. Do you mean max dimensions of the trunk or the box itself?
-
0
Reputation Points
- 8 replies
- 4.5k views
-
-
Just wondering how much a sub box for a fi bl 12 would cost ? Simple Lbox with carpet preferably a 2.4cuft @32hz I would like to know price with shipping, live in Cypress, Ca. 90630. looking to spend around 150 shippped. Im currently running out of money and i just need a box. Feel free to email me @ [email protected] for any information on quote and anything else you need to know about the box im looking for. this will be going into my 2007 toyota matrix. Thank you, Patrick
-
0
Reputation Points
- 2 replies
- 1.4k views
-
-
Vehicle Make and Model:2002 jeep liberty Direct of Box/Subs:top of box towards the roof Sealed or Ported:ported aero ports Number of Subs: 1 Brand and Model of Subs:fi q 18 Max Dimensions: 22. Tall 42 wide 18 deep Port Color: Flush Mount Ring Color (if flush mount is chosen): blue Carpet Color:black Zip Code for Shipping Quote:47923 Any other notes:would like it to be 7 cubes if possible tuned to 28 hertz and want the most port area as possible thanks
-
0
Reputation Points
- 34 replies
- 5.7k views
-
-
When the new Icon is released I am going to get either 1 12 or 1 15. I want to try and go ahead and get the box built up soon since I have the money and so I dont have to wait later. I'm not sure how the specs on the new Icon are going to change and if their will be any new features that would change the build of the box, I was wondering what your opinion was on that. I want to try and go with a kerfed port if possible, and if i can fit it I want to go with the 15. Vehicle Make and Model: 2000 Jetta VR6 Direct of Box/Subs: facing trunk Sealed or Ported: ported Number of Subs: 1 Brand and Model of Subs: SSA Icon 12/15 Max Dimensions: 19 H (Max), 36 W, 18 D (Max) Port Color…
-
0
Reputation Points
- 25 replies
- 6.2k views
-
-
I would like to get a box built for my 12 RE XXX (year 2008 I believe) Vehicle Make and Model: 2007 civic si coupe Direct of box/sub: rear firing Ported 1 sub 12'' RE XXX Max dimension: 40 (W) x 30 (Depth) x 17.5 (H) zipcode: 95122 (I can pick up in Gilroy) I would like to have it tuned to 4.0cubic ft @ 33hz, go low. If you have a better suggestion for the best tune, please feel free to let me know. The box should also have double baffle and flush mount. Please give me quote for one with carpeting and one with just flat black paint. Thanks.
-
0
Reputation Points
- 17 replies
- 3.5k views
-
-
Hi, I'm planning on purchasing a nightshade v2 in the upcoming few weeks and would like to get the ball rolling on a box (hopefully pick up the 10% june discount too?). I'm picking the nightshade since they seems to like the smaller boxes in the 1.5 to 2.00 cuft range. Ideal tunning would probably be something in the 30-32hz range since I really mostly listen to hiphop and I can't sacrifice my lows too much, lol. I still need to have a good part of the trunk still since I do use it for other stuff. Can I get a quote on a box and a possible design?(I don't mind paying something before I see it if that's the way you do it) I also would like to use Areo ports if possible sin…
-
0
Reputation Points
- 2 replies
- 2.9k views
-
-
I am looking to get a 3" aeroport kit, a 6" outside flare and a 6" inside flare, two 6" couplers and six 4" couplers, and then three 4" inside flare and three 4" outside flare. Can I get a quote for these things shipped to 40214?
-
0
Reputation Points
- 13 replies
- 1.4k views
-
-
1.59 cubic feet box for 2 JBL P-Series 10's. Fill the box with medium fiberglass fill, at 100% fill. The dimensions of the hatch are: Max Dimensions: (measured as how physically big something can fit into the trunk with the hatch open without touching anything around it) Height: 28 in Width: 42 in Depth: 13 in Port Color: Black Flush Mount Ring Color : Black Carpet Color: Charcoal I will enclose pictures for clearer observation later today.
-
0
Reputation Points
- 8 replies
- 3.9k views
-
-
-
at last i got a great surprise in the mail today....it was wrapped up in a mopar box so i was like wtf is that .....then i opened it and it was my box as always it is extremely well made thanks Andrew and i hope all is well.
-
1
Reputation Points
- 15 replies
- 5k views
-
-
Would like to get a quote for a carpeted, flush mounted, sealed enclosure. I have plenty of room but my max demensions to work with in my 2000 Celica is 23" Deep 15" Tall 42" Wide. Would like this enclosure to be around 1.3-1.5 cu. AFTER sub displacement
-
0
Reputation Points
- 1 reply
- 1.4k views
-
-
Tried emailing you a couple times but just figured to post it up on here. Vehicle Make and Model: 1992 Mercedes 190E Direct of Box/Subs: Sub back, port driver side Sealed or Ported: Ported (aeroport) Number of Subs: 1 Brand and Model of Subs: Sundown SA-12 D2 Max Dimensions: 32w x 14d x 14h Zip Code for Shipping Quote: 94015 Any other notes: 1.5 cubes @ 35hz. Double baffle. Can I get two quotes, one for a bare box (no carpet) and the other for the whole outside of the enclosure painted flat black. For sub/port orientation if you have a better idea to go with, there is a rear firewall and gas tank between the trunk and rear seats but there is an opening in the rear deck fo…
-
0
Reputation Points
- 15 replies
- 3k views
-
-
Yoo! So i was looking for a quote for a 1.2 cuft ported box for a 10" Fi Q. The Sub would face up and the port would face the trunk of the car with a plexi window, double baffle, and flush mount alomost exactly like this guys 12" btl but 1.2 cubes. Let me know how much that might cost me whenever you can Thanks Alot!!
-
0
Reputation Points
- 33 replies
- 5.1k views
-
-
Andrew I pm'd you,and you suggested to start a thread so here goes. I have 36"w x 16"h x 19"d . want a ported box tuned to 32 htz. I'm trying to fit 2 12" IA lethal injections port and sub back or 1 15" xcon sub up port back. dont know if i have the room to get a box built for either. If not I would like a box for single 12" xcon sub and port back. maybe able to give a inch or 2 on the depth and height if you need it.
-
0
Reputation Points
- 31 replies
- 4.6k views
-
-
Would like to welcome Argent Audio to the SSA forum umbrella and wish the best to them with their new section. Welcome
-
0
Reputation Points
- 15 replies
- 2.5k views
-
-
The KH501 Series subs will be arriving shortly. It will be offered in 10's, 12's, and 15's. Our best estimated arrival on these is the middle of March. We will be starting a pre order this weekend with special prices After the pre sale they will be sold at the following prices on our website: 10 - $154.99 12 - $164.99 15 - $179.99 T/S below are for the 12 inch in D2 Coils, a D4 model will also be available Fs 30.9 Hz Re 1.55 Ohm per coil Qms 5.29 Qes .47 Qts .43 Mms 161.1g Cms 1.593 mm/N Sd 480 cm^2 Vas 51.4l Bl 14.6 N/A Xmax 17.5mm 500 Watts RMS How it started out.... We added woven leads, AL dust cap, magnet boot
-
0
Reputation Points
- 21 replies
- 3.4k views
-
-
Tonight I am going to be testing a new method of assembly on a 10 sealed box. If you need one let me know and I will make it for your sub so its not sitting around No carpet, just bare MDF with all edges rounded over. Andrew
-
0
Reputation Points
- 11 replies
- 1.5k views
-
-
Hey Andrew you made my box for my 2 ia lethal inj. Thinking of upgrading my subs and amp. How do you think two fi q's will work in my box? Duke71
-
0
Reputation Points
- 1 reply
- 886 views
-
Who's Online (See full list)
- There are no registered users currently online