Leaderboard

Cool comparison pictures AND introducing the TEAM Sundown motor that is in development. It will be our first 4" coil motor. Before you ask... ETA and price not yet available. As usual both will be announced when they ARE available. * From Left to Right : TEAM Sundown, NS v.3, NS v.2, Z v.4, NS v.1, Z v.3, Z v.2, and finally the X Motor

Nope the ts parameters don't lie on the zcons. I still argue with someone that went from a 15"zcon to an 18"evil that the Zcon sounded so much better throughout anything he played. That does NOT mean that the evil doesn't sound good, but man does than Zcon just handle anything and keep on going.

zcon

Well, keep forgetting to update this, did a few small things here and there with it over the past week, then last night and today got some work done. Here's the progress: So I just did up my wire leads that will go to the sub: didn't have any red heat shrink big enough for the positive wires, so I used blue. And on to the box:

You've been reading in the wrong places.Buy urself a copy http://www.amazon.com/gp/offer-listing/1882580478/ref=dp_olp_new?ie=UTF8&condition=new Best book you could own for audio. I refer to it daily.

You've been reading in the wrong places. Buy urself a copy http://www.amazon.com/gp/offer-listing/1882580478/ref=dp_olp_new?ie=UTF8&condition=new

Déka make the platinum I believe

My daughter might agree, but I am going to keep things on the moderate side.

I think that ride needs a 12 zcon.lol

National Bass Association ???

Wow. Nice work.

Yes they are. But I am pretty sure Scott and Nick have something on the way. The Mayhem from AA and SP4's are also bonkers options too.

Do you have anymore pics of your amp install? It looks super clean man!

I've had AA Mayhems, and SSA Xcons. Both are the definition of solid. Those would do just fine for you. I've been wanting to get my hands on zcons, the ts parameters seem too good to be true. Those are viable options in that category

Sean in the kitchen. http://www.youtube.com/watch?v=TW0Gn9DjYyY

THE BOX IS HERE! Terminals.. Mounting my EQS to the box. I never change my equalizer settings but if I need to I can always go back there and change it. I mainly use it for the pre-amp. Now to seal it off. Thick cardboard, vinyl, gorilla tape, black fabric, fabric glue and Second Skin. The cheap way.. Just cut the fabric to match the cardboard and box height and width.. Laying it and glueing part of the fabric to the box and the cutting it out.. While its drying I drilled the holes out for the amps onto the box. Slid the box into the trunk and placed the thick cardboard around it and starting to tape around it with the gorilla tape. This is from the front side of the box.. I didn't get a picture of this but I glued the rest of the fabric to the cardboard in the front, you will see what I am talking about soon. Now to the trunk side.. Now to lay some deadener down to re-inforce the tape. No point of showing around the whole box because its a tight space so all you will see is deadener and tape lol. All looks like this picture lol. That's it for sealing off. Tomorrow, I am going to open the trunk while playing and see if I am getting any cancellation. I didn't get a chance to do that today. The box is screwed into the floor so it won't move, the other L brackets are for the battery. I vinyl wrapped all the L brackets black to match. Second battery hooked up! Now to the amps. Can't wait for my SAZ2500D and SAX100.4 to come in they will look way better in the trunk.. BTW it was a pain in the ass screwing those amps in that tight space lol. There Here it is all finished up.. I will take more pictures tomorrow, these are kind of dark because it was raining outside while I was doing most of the install so I had the car in the garage. I will try to get a video of it as well. Thanks for looking..

The moment everyone has been waiting for!!!!! Well, mostly me lol. Anyways on to the pictures! Setting up and waiting for Fed Ex.. Looks a little better in person, but here is the rear deck with Second Skin.. Some equipment, everything was kind of laid out so when the box arrived, I could just throw everything in. And yes, I know that those amps are not the Sundowns but I am waiting for the amps to come in the mail so for now I will be using some Hifonics amps.

http://www.youtube.com/watch?v=mgGyU4LIpiQ

It won't handle it daily. And it was probably a burp. Also just because its on a 12k doesn't mean it's getting 12k rms.

I HAVE AN IPAD, SO FUCK ALL OF YOU.

The BL with the cooling option will fit the bill.

I got an Email from this guy awhile ago named John from adassa audio promoting the Kevlar subwoofer. It seems to be built extremely well and its a daily driver and it says it takes 6 k! I talked to him about it and he said it takes 6k extremely well. And the spces seem very good. What do you guys think about this woofer? http://www.adassaaudio.co.uk/Kevlar15SubwoooferPage.html Here's some more stuff on them (Research) "We at Adassa Audio are always working on new product like the new Adassa subs ADA-KEV-15.1 and ADA-KEV-12.1 it has a 200oz and 440oz its a dual 1, dual 2 its has a 3" voice coil and 6 spiders on the 15 and 4 spiders on the 12” CCAW Flat wire Voice Coil and 100% Kevlar cone and a Heavy duty rubber border. This sub comes in a 12" and 15" more info to come soon"

Please do not spam our forum. Thank you.