Mark LaFountain

I would go with the zapco if you are doing sealed. If you just want a nice blend with your front stage etc. If you want more output, obviously go with the sundown. If you had a ported enclosure, it would be a different story all together.

We have two of these left. Come and get them! BNIB http://www.soundsolutionsaudio.com/store/products/15%22-SSA-ICON-15D1.html

Nice, cool feature finally adding wifi to phones. I was thinking it was cool about the plane. It was actually decent speed too.

thanks guys! I have a few more days left, and snuck on the net today for a few. hope all is well

You would most likely have more output out of the single 10" Ported in your case then.

Yes, our "team" is more like a bunch of good friends, wether we are online or in the same town, we all get along very well. You get equipment discounts on subs, and various other perks depending on how you are doing. "Perks" really vary a lot, so I won't get into that.

what type of car? trunk, hatch? With out knowing anything other then you like rap, Ported will probably get the job done nicely for you.

Just a quick note to those of you who haven't noticed (since Aaron does such a great job), I will be out of town on my "holiday" untill the 5th of Jan. Thanks for your understanding! Hope everyone is having a great holiday!

IA says they are very under-rated. Pushing around 4500rms on 12v, and damn near 8k on 16v's!

Glad you guys got them. Those who ordered L size shirts, they are a few weeks behind. Dickies was out of stock of them. They'll ship out shortly as soon as them get here.

Looking good. To bad it's got roll up windows. Those are getting in the way! lol.

very nice.

The Decal rules I was told, said this thing needed to have simple colors, be universal, and still look good while having the pole vent center stamped out of it. Can't go with the carbon fiber look like my avatar, just to complicated to print. The flag has sharp edges which should print well. Idk, this thing is tougher then I thought to design.

V.2

making a second version of this. this has to be a universal decal to go on all subs, so we are not putting model specific info on it.

This is a simulated back plate sticker of the 1st draft. I am working on, what do you guys think so far?

http://www.soundsolutionsaudio.com/store/products/Incriminator-Audio-40.1-Mono-Block-%252d-3600w-RMS!.html The IA40.1 series amplifier is our solution for your ultra-high power car audio needs. This versatile amplifier is capable of producing power levels that can be used by both a serious competitor and the hardcore street enthusiast. Unlike other amplifiers on the market that have to be modified to reach competition power levels, the IA40.1 is a plug and play unit. No more cutting internals, modifying fuses, or splicing wires. This amplifier is also strappable, which means it can be "daisy chained" with another IA40.1 to produce even higher levels of power. For the street enthusiast, this amplifier produces enough power to supply either a pair of competition woofers, or a multiple subwoofer setup. Whether you are cruising down the road with your ground pounder, or you are like dB Drag Racing competitor Scottie Johnson and need a 3 second burp, this amplifier is for you. Digital Class-D Linkable Mono Block Amplifier Exclusive Bullet Proof Technology Layering Daisy-Chain Through Output RCA for Strapping 1 Ohm Stable and 2 ohm stable when strapping Dual MOS-FET PWM Power Supplies 24 dB Low Pass (LPF) Crossover Variable - 30hz to 250hz 24 dB Subsonic Filter Variable - 10 Hz - 70 Hz (with ON/OFF Selectable Switch) Selectable Switch for Master and Slave Operation Multi-Layer Protection - Speaker Short, Over Current, Thermal, and DC Protection Circuit Line Input and Master Output / Slave Inpute RCA Connectors Heavy Duty Copper Layer Double Sided Epoxy PCB 0 Gauge Battery Input Connectors 8 Gauge Speaker Output Connectors 100% QC Testing and Warm Up Efficiency: 86% @ 4 ohms, 100hz Tested Voltage & THD: 14.4 and Less Than 1% THD at 4 ohms RMS Watt Operating Voltage: DC 10V ~ 16V Power Input Damping Factor: 350+ into 1 ohm Input Sensitivity 200mV to 6 Volts Rated Power Output RMS 7200 watts at 2 ohms linked 3600 watts at 1 ohm 1800 watts at 2 ohms 900 watts at 4 ohms Dimensions: 10.00" (W) x 3.07"(H) x 25.19"(L)

First off, notice his choice in shirts

On topic... hehehe Oh and now I don't know about that BTL... Dammit you are making things difficult. we try

love the view from the back of it, looks sick! Very unique.

we are hoping 6-8 weeks, but there are no promises.

so far everyone who has seen these, have the same reaction. Comparing them to sex. lol, so really, it's on topic.

The cone will stay as it looks, only difference will be the decal on it, will say "ZCON" with a smaller SSA under it, same look as the XCON/ICON has.