Everything posted by j-roadtatts
-
Welcome to the IHoP
I cannot say enough at how much a difference it was when we thinsulated my roof. Was huge for this super cold, curious as to how it will do with the very hot days. I can make it almost all the way to work and there will be frost still on the top because most of the heat from the cabin did not make it up. Did insulating the roof help with road noise or just help trap the sound in the car? I believe my next step is going to be filling the a-pillar base with expanding foam. I think there is alot of road noise traveling up from the front fender through the open camber inside that area of the car body.
-
Welcome to the IHoP
I enjoy discussing sound deadener with ppl. The science behind it is fun. That being said most ppl don't have a clue.
-
Welcome to the IHoP
The dog just farted and then left the room. Dumb bitch.
-
Welcome to the IHoP
<---SUPER jealous. We can't seem to get under 50. It laid down 6" in about an hour and continued all day. Was a mess on the I-70. Cars and trucks in the ditch everywhere. We can't seem to get over 40 here. I am sure the high country where everyone rides probably got closer to a couple feet. Can you say POWDER!!!
-
im about to get my wisdon teeth pulled, any tips??
Dilaudid (hydromorphine), Fentanyl, or morphine are honestly my fav's but are hard to come by. Speaking of Perc's....gobble, gobble.
-
Welcome to the IHoP
- im about to get my wisdon teeth pulled, any tips??
You almost had it Duran. But you still fucked up the spelling of my favorite. Perocet is oxycodone and acetaminophen (tylenol). I was a lucky guy I guess as mine weren't shit to get pulled. I only had one side pulled but also got the teeth in front of them pulled at the same time. So 4 on one side. What you really wanna avoid is dry socket (basicly sucking the scab off the wound prematurely). So minimize the sucking motion of straws and smoking. Definetly easier to heal the top ones as nothing gets in them.- SLOW build on a 2001 GMC Jimmy
Thats a snazzy enclosure design Alton. I like it! Good to see some forward progress!- Happy Birthday jay-cee
Happy Birthday Brother!!- Welcome to the IHoP
Good luck getting just the way you want it. Vented and some polyfil and they should sound great. I think fleece and a few layers of the woven mat are more than strong enough. The ass on the Anarchy's probably isn't helping the pods get any smaller either. Are you planing to start with seperate rings next time or a single baffle again?- Welcome to the IHoP
They definetly make it look easy. lol. My dash pods are box carpet (felt) with no mat. The fleece works good too. With just resin its already an 1/8" thick. I'm sure the thick fleece adds thickness, but it's still just resin, mat is where the strength comes from. I guess if it's something small then it could work, but I don't see any good reason for skipping the mat, other then it sucks getting on your arms. Rebuilding my kicks in a few weeks, going to make them a little differently, hopefully they'll look better, be stronger, and sound better. We do it nice cause we do it trice.- Welcome to the IHoP
They definetly make it look easy. lol. My dash pods are box carpet (felt) with no mat. The fleece works good too. With just resin its already an 1/8" thick.- Welcome to the IHoP
We finally got some snow!!! Is some nice heavy snow too. Should make a sweet base.- Project 1998 Acura 3.5RL
I piece of wood could do the trick. Or just seal the trunk off and eliminate it out of the equation all together.- Welcome to the IHoP
My 10" 200Watt mid is 1.580 kgs or 3.483 lbs. Its not bad until I park on a hill. And thats even with a neo motor. What mid are you running? Not running them at the moment, just chilling in a box. Should get deadener soon and then I'll start with the doors. Thinking about ported box in the door for my SA Neo Pro. Thats what I guessed. I have been entertaining the idea of getting a pair to play with too. I keep hoping for a 12" but doubt it will happen. There are a few here that I like.- Welcome to the IHoP
My 10" 200Watt mid is 1.580 kgs or 3.483 lbs. Its not bad until I park on a hill. And thats even with a neo motor. What mid are you running?- Welcome to the IHoP
well its probably going to Colorado or something first then Memphis. makes sense in a UPS kinda way i guess.. This makes more sense. This would be closer to 65mph.- Welcome to the IHoP
My mid only weighs 10.6lbs or 4.8kgs.- The V40 Rebuild, Front Stage Only. Update: Rear cargo area.
Everything looks killer Stefan!! I love the way your trunk came out! Good luck getting the frontstage dialed in just like you want it. I feel your pain, I did it 3 times also. We do it nice, cause we do it trice.- New Year, New Website. The New SSA.
The new SSA site and store are so much more appealing now. less generic looking and definetly more inviting!! I love the stone look!! Awesome job Mark.- '96 Bronco build
Everything is looking good so far!! keep the pics a coming.- Welcome to the IHoP
Agreed. I need some blue label SSA subwoofers! Mark did it all. I'm sure you will pass on the word.- Welcome to the IHoP
Download foxit reader and make it the default for pdf- Welcome to the IHoP
The main site and store look killer Aaron!!! Awesome job brother.- Welcome to the IHoP
Nevermind. I downloaded updated Adobe reader and am up and running again. - im about to get my wisdon teeth pulled, any tips??