cheese20323

I have owned a type R and heard an L7. Both were in box to specs. The type r had good SQ and was still able to get loud. The L7 got louder but just did not sound as good. In my OP if you want output L7 is your choice. If you want to get good SQ and get decently loud go towards the type R.

see something like that and have the port pretty close to the woofer. Would that be a pretty good idea

O.K after playing with this for a while i think i got it but one question can you add a curve to a square port. Because the port is too long by the way i want it but it does fit if i add a curve

oh i see i thought you add them. How about if i want 2 one on each side. but the number that comes out is 2 long for my box

I was thinking 6x6x6x6 so it can equal 24 right

O.k i'm still a little confused what do i do i put in the square vent box Height/ Width. And do i have to figure out the formulas? I'm still a confused.

Audiosavings.com

Ok thanks i have about 1.9 cubic feet so about 24 sq. inches of port. What goes on after this?

Ok so I am going to build my 3rd sub box and i want to know how to cut the bracings and that stuff. And how to port/tune you box. I am going to put it in a car and i want the sub facing upward and the port too. I do not want an L ported i want like square type one. My sub is a 12 Fi SSD. I want it to use half of the trunk but not be so tall just like an inch after the sub fits. But mainly i just want to learn how to do square ports. Any help plz.

you can strap 2 SAZ 1000d

Maybe you should try some better wire. Checking your grounds, fuses. See if your subs are wired right. What would I be checking on the grounds and fuses? Your amps fuses and make sure it has a nice ground. I always like checking the little things because they lead to big things. So i check everything pretty often

Maybe you should try some better wire. Checking your grounds, fuses. See if your subs are wired right.

Yes that one is the right one. How can you have a 10 inch BTL maybe you have a BL

24 inch subwoofers

I just built 2 boxes 2 weeks ago. I'm only 14 and I had my dad cut the pieces and everything came out pretty good. Looked sort of odd but after 45 minutes of sanding it came out perfect. Then i built my ported enclosure and boy that one was hard but it got easier once I figured it out how to actually assemble it good . And in about a week i will be building another one. Once you do it a lot of times you will get better. Or you might just get it right the first time.

Hey i just got 2 new RE REX12 for my little home audio setup. These things sound very good for the 120 i spent on both. And there only off of like 350 wrms. Really like how they look too. Good job US amps/ Re Audio. And they came with some cool stickers.

8GB Spy Camera Watch - All Metal Watch

SAZ can handle 18v electrical systems. But other than that there not very different. There really wont be an audible difference either choice is fine

Yeah im pretty sure too. Those subs are a litle similar to the SSA XCON

]Well if the old HU you had was the same brand of the new one it should fit. But if it doesn't you will have to do every thing all over with the harness that came with the HU.

welcome . You've got some nice equipment good job.

Damn bro you have some good building skills i give you props.

So Cal too. S.D. Thats good. I've been here for like 4 months and have loved it. I go on here more than Facebook or Myspace but i have learned alot.

Hey welcome to the forum and hope you have a good time here. Just out of curiosity what part of cali do you stay at im in the so cal area L.A county