DD9915D!!!

Helloo CHOP! And Mikey and Steve, Thanks Mikey for the 1" plexi! I am Mike Heinicke, co-owner of Excessive Dbs here in Indianapolis and proud member/supporter of TEAM IAK SC! I will not be making any product recommendations outside the IAK circle nor will I engage in sales to any other forum member on SSA not flagged AIK and reccomended by Chop personally. That said all flagged IAK vehicles receive 10% off in my shop - that is all. Peep this trash...

I didn't he did not have enough to do that, I wanted to do the firewall too, but we have some budget constraints. So far it has made the overall ride much quieter though. Also Epoxying the door panels makes them very heavy and they tend to resist vibration better after that treatment.

Thank you Poppa Chop! I have bee slammed I got an 18 Fi BTL in a Blazer I am starting tomorrow and I have a Magnum I just Finished a box for (also with backlit frosted plexi) his has the Rams head logo with Magnum written underneath. Should be sick - heres a pic of the plexi and the kerfed port...

Alton call me man, Chuck said you were going to be eye-ballin this build - gimme a jingle if you need work done.

where were the LED's connected to? on the board or did you wire it to something else? A switch under the radio turns them all on at once 8 for the subs and 4 others (two in each amp)

The helper cleaning up The 8s are going in 1" plexi Before treatment After side by side Before with one light after Window cut out Box gets bedlinered tuesday - more pics then

Can't really tell in this shot but there are 7 sounddeadenershowdown tiles in the door. 6 1/2 to 6 x 8 adapter Memphis Mids peeking out The box for the SA8s, which are o backorder apparently, lol! In the middle of epoxying the box "Daddy can you hear me talking?"

Here we go Epoxying the rear liftgate Amp before After Lights out Knuconcepts 1/0 fit Amp rack legs made with home made table saw

Thats an old milotronics hack job from the old days. Thats most likely a 300x with a 2000x endcap on one end. If it were a real 2000x it would have 4 8awg power inputs and 4 8awg grounds. It would also be about 23inches long. looking at the pics I can see you have one end with 8 inputs total, looks a little smaller. Where did you get this from?

Thank you sir, mr owner sir.

Man you would be reallly pissed if I did a build log. I want to get everything done, THEN do the build log, otherwise it will turn into 55 pages of "Thank you sir, may I have anotha?". Trust me I got about 100 pics of the build so far, I will make on in about a week when a majority of the work is done.

Wait till you see the facia the subs are mounted in... 1 inch plexi with frosted finish, ftw. Thanks for the corn-hole tounging, Chop! lol!

Thank you, kind sirs!

Well, I got busy on Chicagofans amp rack and enclosure and wiring etc, and I took a second to do this.

Thanks Chuck!! Glad you got your parking pass back man, sorry my phone died - and I will post pics of your build in a bit.

PM if you need help, I will help too.

Hell yeah.

Dont mind the braces, I get to the epoxy on it later almost done

A few more...

Drilling the facia in from the bottom

A few more Wiley brought over a dremel, nice tool, for routing holes. (Going reeeeally slow!) Test fit.. Poor shipping carton... 2 of the 3 top facias

Heres me covered in sawdust Routing More routing O Bracing Triple top facia!

Girls would sit on the bumper and thier hair would go everywhere.

Welcome!

x3 or 4 or...