danssoslow
Members
-
Joined
-
Last visited
-
I use a Greenlee Cm-600 at work and it's durable and very reliable. The resolution is not a quick as a buddy's Fluke clamp on meter; but unless there is a purpose for your boyfriend to need a meter with a refresh rate within the tenths of a second, the Greenlee would be more than fine and quite a bit cheaper. You can pick the Greenlee up at Lowe's.
-
Nice to see you here. Hope you can learn something.
This is where it gets tricky. Take the example of both of them being at 80hz/24dB. It'll still be at 80hz/24dB. If one is set to 160hz/24dB and the other is 80hz/24dB however, the point of the 160hz point will overlap the 80hz one. Which effectively makes the 80hz point useless. It doesn't combine. The slopes have to be additive. Let's take two 80hz/12dB crossovers for example. The output signal of the radio is playing at a level of 100dB pink noise. Through the first crossover, the output signal is now 88dB at 80hz going into the second crossover. That 88dB signal will then get cut another 12dB at 80hz to now arrive at an output signal of 76dB, or 24dB from the original signal. Every crossover is going to cut the signal coming into it, regardless of what the original signal was. Correction: As KU40 has said, 80hz would be the point where it is 3 dB down; but even so, through the second crossover the signal would be 6dB down from the original signal.
Anyone here familiar with the Grado SR-60? Reviews suggest these are a no brainer at a little over $70 shipped.
I think he was referring to the two different colors. Seriously though, what kind of clay is that exactly?
The magnet is 4" in diameter.
First forum I was a member of was bob's 4cycle. Was looking to build my first kart and figured the name was fitting. Come to find out, it works for me on many different levels...
A good friend of mine shat on me for putting my 4yr old in the YMCA tee ball league for that very reason.
Hell, you're in Louisville, aren't you? I'll come by; if for no other reason than to get me the hell out of this house for a little while.
I agree that the wing will look good. Of course, I think they should design a Daytona conversion. I wonder what that wing would look like. Those rims on the Hemi Super Truck would look smokin' hot on that car. http://www.moparsupercenter.com/2008-mr-no...m.html?cat=1307
As I remember, we had it hooked up mono to one sub. The pair that is sleeved with the romex sheathing should be the set used. I believe two were capped off, and the remote had a connector on it. I found an online owner's manual; let me find it. Edit: I'm not coming remotely close to finding it. Damn you, Google, damn you!!!
PM'd you.
"Are you F'n S*&^%#G ME!!!!" That pic is priceless. I'd like to believe that only your mother was upset; and that your dad was like "damn, you hittn' in the 50's ?!?"
Could be a 2nd chance for you. http://www.diymobileaudio.com/forum/showthread.php?t=41546