sefugi

I would start by saying to turn the bass boost off. The remote only controls the gain not the boost. The bass boost seems to end up causing problems with clipping and tearing up equipment. A custom shop might be better for finding a meter.

My thoughts from what you have posted and the equipment you are using is that first, with the 2-4ohm subs you are not getting full potential (500-600watts)from the amp. Secondly I beleive the CDT subs you are using are more of a SQ type of sub, which to me I think you are expecting to much of them. Now I will say that I have not used the CDT subs before so I don't know what they are capable of as far as loudness. Maybe someone else will chime in and give their thoughts.

Welcome to SSA!!

What are these going in, and what are the plans for covering??

I'm diggin' the enclosure for the peerless' in the doors, was thinkin' something similar to that for my next build. Will be lookin' forward to hearing your thoughts on the outcome. Great work!!

Thanks for the shout out!! What are we painting??

Get with Don at http://www.sounddeadenershowdown.com/cgi-bin/index.cgi contact e-mail: [email protected] He will help you with whatever it is that you need and wil recommend what is need without overselling with what you don't need. Good Luck!!

You will be fine just upgrade the other connections when you get the terminals.

From the sound of your post you have the understanding of "install dependent" You mentioned you are not new to audio, but if you have not heard of the BIG3: read up at this link, it will help out with any electrical and give ground work if you upgrade any electrical in the future. Keep reading, as I can tell you have, we can allways learn something to enhance are skills with installs. Good Luck!!

All goes well we will get some SSA products into Phase 2 of this project!!

Congrats man on your ride page!! That's cool stuff!!

Looking good!!! You are a busy guy!

Nice!!!

Damn, that is some serious frame work right there! I'll be watching the progress.

OK guys I cracked into grasshopper's pictures and this is what I found that he hasn't posted. I knew more had been done but the pictures havn't shown it. No disrespect, but the story has to be told.... Driveshaft was pulled, and was shortend, balanced, new carrier bearing and u-joints installed. By grasshoper at 2010-10-19 Back in... By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 New trans pan installed... By grasshoper at 2010-10-19 Trans Cooler installed. By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 Have started running the trans lines to the cooler. By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 Getting the plumbing of the cooling system started. By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 Power Steering connected. By grasshoper at 2010-10-19 Have started the plumbing of the fuel system. By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 By grasshoper at 2010-10-19 Thats all I could get you guys for now, we will continue working!

Great Work!! Looks good!! Like you said, little cleaning on the wiring and you will be there!

Great Job!!

Only experience I have with Soundstream is with my son's build (link is in my signature). Have been happy so far with the output they give, but they are the D-Tower Series. The difference I see in the specs of the 2 you have listed is the rms power specs. one is listed as 350 rms power and the other is 350 peak power. The amp phi has given as an option would be a good choice for the $ Good Luck!!

For all that racing I do with it. I was able to get a good deal on them and I thought they would look nice behind the big wheels. It works!!!!

Welding wire is great to use I would probly stay with 1/0 for your big 3 unless you are doing something hugh for an install.

This was in the hatch of an Escort GT with 8-12's. No decent pics of the wall and this one is a picture of a pic. Sorry for the poor quality. By sefugi at 2010-07-13

You can haz it! I am going to put the kids in it and play whack a mole. lol Then I want dibs on the subs!! Awesome work!!!! That port looks hugh!! Size?