sefugi

Here are the updates for the amp rack progress. Starting to get the power and grounds layed out and connected. Here are the pics.... Amp rack with the Distro & wire bushings installed. By sefugi at 2010-08-08 By sefugi at 2010-08-08 Begining to connect some wires. By sefugi at 2010-08-08 By sefugi at 2010-08-08 Test fit to check lenghts of wires. By sefugi at 2010-08-08 Securing all the wires under the amp rack. By sefugi at 2010-08-08 Amp rack installed. By sefugi at 2010-08-08 By sefugi at 2010-08-08 Few more pics of the distro and the "nobody likes" Capcell(purchesd as part of the design sorry!) By sefugi at 2010-08-08 By sefugi at 2010-08-08 By sefugi at 2010-08-08 Will probly get the amps installed sometime this week. Stay tuned for more....

Welcome to SSA!!! Good Luck choosing your new sub!

"Don't mess with an Old Vet"! Funny vid, that dude didn't know that was comin' or he would have stayed home!

Box looks great!!! I'm diggin the kerf port! Have thought about MOFO's for my next project. So many good choices out there for subs. Keep up the good work!

Original is what we were lookin for.

Thanks so much!!

Thanks!! All these "touches" are chewing up some time!

Great lookin brackets, makes me want to buy a truck!

Thanks! Still lots of work before we are ready for vids.

Thanks!!! Much better than sanding!

Great lookin setup!!! Amps look really clean and with the subs hovering above them that is sweet! Kudos to the cool tool, Nut Riveter, that would be very handy!

Rods look good! Those won't come loose! Bring on the vids

Thank You, Sir! WIll get a lot of pics of the completed hatch fro different angles once completed and when frontend is put together I'll try and get a few vids up to show the whole project from end to end & inside & out!

Thanks!!! I think?

Here are a couple quick not so good pics to give you an idea of the leds in the spider grilles. By sefugi at 2010-08-06 By sefugi at 2010-08-06

Thanks!! You read it a lot faster than we have built it LOL!

Starting to get things together that we have planned on for a few months now. Here are a few of them as we progress with the hatch install. The spider/speaker grilles for the tens in place. By sefugi at 2010-08-06 This is a shot of the base that will partially support the amp rack and the neon tubes that will glow below the amp rack. By sefugi at 2010-08-06 We did not like the spider grilles the way they were so what can you do??? Mod them!!!!! By sefugi at 2010-08-06 What we did was drill through the spider eyes and mounted red leds to shine through them and mounted 2 blue leds under the body of the spider that will glow off the sub. Black silicone was used to keep the red light from shining on the subs and focused directly through the drill holes. By sefugi at 2010-08-06 We tied in some spiral wire from the spider grill to its power connection to keep up appearances along with rca connections for a smooth transition to the hatch. By sefugi at 2010-08-06 You can see in this picture how the spiral wire and the rca connections really help the look. By sefugi at 2010-08-06

Thank You! We don't know yet if the enclosures will produce the sound we might want, but they have given us the look we wanted.

OK So here we go on the install of the audio that belongs in the hatch area.... Wires for the 15" in place. By sefugi at 2010-08-06 15" sub enclosure in place and secured to bottom of spare tire well. By sefugi at 2010-08-06 10" enclosures predrilled and ready. By sefugi at 2010-08-06 10" sub grills predrilled. By sefugi at 2010-08-06 10" enclosures installed and secured to hatch floor. By sefugi at 2010-08-06 By sefugi at 2010-08-06 10" subs installed. By sefugi at 2010-08-06 By sefugi at 2010-08-06 By sefugi at 2010-08-06 By sefugi at 2010-08-06 More to come....

Looks very nice!!!! And Welcome!!!

Great lookin work, waiting to see that 300C!

Port looks great!! Excellent work on the flare!! Tuned in to see this completed!

Nice Enclusure!! Diggin' the kerf port! Keep up the good work!

Great Vids!!!