Tirefryr

Racing on loose dirt is so fun!

I'm confused.... Me too obviously. 4wd/awd, can tow, is fast, and can handle. I'm not excited with what is on the market so I thought having something built might be fun. The ridiculousness of a HD truck that is dropped sounded fun...that and diesel power boosters are sweet. The first two are readily achievable. For the third you're either going to have to change your definition of "handles good" or you're going to have to do some work with the suspension. Especially with a diesel. Nah, 75% of the weight up high and over the front axle makes for fun.

Why diesel? You won't need the stump pulling torque on the street and the new Coyote's are reaching upwards of 1K with just forged internals and your choice of boost. If you keep your foot out of it, they are just as efficient as the diesel.

And if she's really big, she could double as a sofa.

A fat girl. Well, how well do you need it to breathe?

No, it's just Florida.

Damn, you fucked that up very well!

Go drive one. Ergonomic nightmare.

I have one of both.

Viewing it is perfectly fine, just make sure no one catches you lol There can be no "catching" me. It just makes me want to fuck and there's a couple nice fucks around here.

I should NOT be viewing this while at work.

It's capitalism at it's finest. I don't like it either, but it's no different than paying a 300% markup on tools, appliances, clothing, etc. . .

There's two felonies right there. Unfortunately, the PO is not so aggressive these day investigating fraud unless it will net them a large sum.

Interesting. I always cut the middle out first, but leave about 1/16" of an inch, then route the outside, and simply pop the inside out with my finger, run sand paper and done.

Sure. Give me the W7 and $400 and I'll send you the amp. I'll even pay shipping on both items.

I'll sell ya a mint black 1000/1 for $400.

Fuck. Ouch. Did they give you a back and shoulder brace?

Rick, could you shoot some more pics with a higher res camera? I know it's only $140, but I am shopping for a picky SOB. Thanks!

You'll have to get into the programming on the keyless entry system. It sounds like a programming issue.

That is one thing I can eat in endless supply.

Reflections are bad and nearly impossible to control. Any "famous sq guy" who would say that is truly an idiot. I will agree with him on some points though. Hair tricks are dumb and most of the time, sub woofers aren't needed, neither is a lot of power for that matter.

I don't get it.

I hope no one is surprised by this. Should not be shocking news for one of the prize technologies touted on a Chrysler vehicle to be crap. Just so many reasons year after year to never touch any of their products (discounting the Viper). Speaks volumes about the billions Damlier pumped into that company and the well done tried and true tech they passed on and Chrysler is still this bad. Daimler actually didn't pump in billions but instead looted their cash for other developments. While that may be an issue now I'd consider it a growing pain and I fully expect Chrysler to make a huge improvement in the upcoming years. Of course it isn't like htey could fall much lower than a few years back, lol That's news to me. I was under the impression that Damlier intended to buy and save the company from another failure and make it profitable for the future. To me, the difference in price the paid and the price they sold is quite interesting. They bought Chrysler in a spot when they had enough cash to survive for a really long time. When they sold them the cash had magically disappeared. Daimler's facilities had also some major improvements. I hope Chrysler improves, hell we own them. They've not done so in over 30 years, so why would they start now?

I'm sorry, but they are the worst tool for measuring. This is exactly what I am talking about in the previous posts. You see it acting differently and pick arbitrary numbers out of the air , insert, and bam. See what I'm getting at? Isn't that how you measure all the time. You measure with your eyes when you need to stop your car so you don't wreck. How far to step so you don't fall down the stairs. What size a bolt is so you can get the right size wrench. I don't carry a pucking ruler in my back pocket nor do I care too. See what I'm getting at? I noticed a very audible difference as well. At full tilt my truck is quiet as shit on the outside with the windows up. The problem is your eye is not sensitive enough to he used as a measuring device for panel movement. It's akin to stating you could measure a driver's excursion by eye. Audible differences are a given, but you are already perceiving a change so you brain has already signaled there will be a change whether there is or not. Is it really that horrible of a product if he bought the shit to make his roof stop rattling and it worked, ive heard his truck at full tilt and it is pretty damn quiet for the huge sub stage. He bought it to stop rattles, applied it properly and it has served his purpose, no need to split hairs and try to discredit what he experienced. This is such a dead horse, why spend this much time worrying about it? I'm not worried about anything. He just proved my point I made earlier. Yes, the stuff made a difference, but what amount. I was not questioning the difference, I questioned his numbers stated and methods of measurement. It's simply perception. He percieved a difference; his mind had already made that decision for him. I understand why you would suspect that, but to say it as if its fact and there's no way it could possibly have happened just shows an automatic bias. Your hastening to doubt a product that you've never seen, heard, or used just because of one bad batch? After the owner gave OP team pricing (real team member), and offered to send more or refund his money, I really don't see the problem. No ones claiming its the best, but to automatically assume its useless junk is a bold statement not supported by facts. You are reading into what I'm typing. Read it for it's literal sense. I am showing no bias. I never stated it was useless. I did say it was junk. It is. And the owner is a douche. These ARE facts proven many times over. There's a reason the guy won't come on this forum anymore. There's a reason he hides on other forums where shit can be covered up..

I'm sorry, but they are the worst tool for measuring. This is exactly what I am talking about in the previous posts. You see it acting differently and pick arbitrary numbers out of the air , insert, and bam. See what I'm getting at? Isn't that how you measure all the time. You measure with your eyes when you need to stop your car so you don't wreck. How far to step so you don't fall down the stairs. What size a bolt is so you can get the right size wrench. I don't carry a pucking ruler in my back pocket nor do I care too. See what I'm getting at? I noticed a very audible difference as well. At full tilt my truck is quiet as shit on the outside with the windows up. The problem is your eye is not sensitive enough to he used as a measuring device for panel movement. It's akin to stating you could measure a driver's excursion by eye. Audible differences are a given, but you are already perceiving a change so you brain has already signaled there will be a change whether there is or not. Is it really that horrible of a product if he bought the shit to make his roof stop rattling and it worked, ive heard his truck at full tilt and it is pretty damn quiet for the huge sub stage. He bought it to stop rattles, applied it properly and it has served his purpose, no need to split hairs and try to discredit what he experienced. This is such a dead horse, why spend this much time worrying about it? I'm not worried about anything. He just proved my point I made earlier. Yes, the stuff made a difference, but what amount. I was not questioning the difference, I questioned his numbers stated and methods of measurement. It's simply perception. He percieved a difference; his mind had already made that decision for him.