Everything posted by pmureika
-
My first SUV gets a sound system.
Looking good!
-
Pictures of your new equipment
You should have tried us acoustiks from ssa.
-
Where do I sound proof these doors
Damn these smart phones
-
Where do I sound proof these doors
Where and how much do I apply to the doors
-
Where do I sound proof these doors
Yes it is a plastic panel.
-
Where do I sound proof these doors
Where do I need to apply sound proofing to these doors?
-
SMD DD-1
I agree 100%.
-
New front stage....need input
You are correct sir! lol It's amazing hearing the difference between tapping on the rear doors vs the fronts now. Guess it's time to pull the rear panels and do those too, even though there are no speakers in those doors. The handles are vibrating like crazy.....hopefully that will help to solve the issue. What I hate is all the plastic panels that rattle. Agreed. The one that's giving me the most problem is that plastic frame over the license plate that holds the latch release and license plate lights. I did some deadening in the hatch as well and it seemed to help quite a bit, but there's still a little noise (much easier to live with now though). The problem I found was when I went for spl it caused a lot of problems. Like shaking everything lose. That's why I go for sq now not spl.
-
SMD DD-1
Couldn't agree more. Was a play on the discussion. Sure it reflects how I and most of the board feels, but it would be a further waste of money on the end here that pads some asshats pockets. Self defeating in that respect. See I took it as a play on one of the "Smash my xbox" type things where we go get an xbox just to say we were going to give it away to someone only to have them watch us smash it first. I guess that it is kind of mean and a waste, but I've wasted my money on other stuff that didn't make sense and was a waste. Find a used one for sale? And then show why it is only good for one song or hz.
-
New front stage....need input
You are correct sir! lol It's amazing hearing the difference between tapping on the rear doors vs the fronts now. Guess it's time to pull the rear panels and do those too, even though there are no speakers in those doors. The handles are vibrating like crazy.....hopefully that will help to solve the issue. What I hate is all the plastic panels that rattle.
-
New front stage....need input
The sound goes in instead of people hearing it outside the car. lol
-
Welcome to the IHoP v.2
Why is it the faster you clean the rain gutters, they still get plugged up?
-
So, what do you do regarding fusing between your h/o alt and the batte
I don't use one because of space.
-
Box size for a HdS210
It will give you voltage but not as good as measuring at the amp. I have a upgraded alternator and only running a 400 wrms system know. But I still get headlight flicker because the voltage regulator can't react fast enough. Like Alton said as long as you are getting around 13 volts to the amp you are fine. Unless the dimming is real bad just check the voltage. I have one of those it is better then nothing.
-
Box size for a HdS210
I would start with the big three and see what happens.
-
So, what do you do regarding fusing between your h/o alt and the batte
In that wire should be a fusable link if you look close.
-
SMD DD-1
For someone who doesn't know what they're doing, it's also a good way to break things as it's uselessness goes both ways. Its only good as a paper weight.
-
SMD DD-1
You could do the same thing with your ears for free. https://www.youtube.com/watch?v=57RUYL6lsq0
- VIOLENT Bass Demo! 4 SSA 18's On 4 Nendo 5500s
-
SSA Dcon install photos (share them)
Lets get more dcon photos posted!!!!!!!!!!!
-
SMD DD-1
Not worth it even if your going to use it once.
-
SMD DD-1
Use your ears.
-
Four channel amp
I can go to 15 hz. Thank you!
-
Four channel amp
I don't know. I have ever used a four channel to power a sub. So what I am saying if I set it to high pass won't the sub try to play all the hz?
-
Four channel amp
Do I need to worry about the sub bottoming out because it has no ssf filter?