Everything posted by pmureika
-
Best NON - Nav Headunits for SQ?
Budget range?
-
Order 3671
I think it would help if they said 7-15+ business days and faster email responses!
-
Order 3671
If you do I think you will be sorry. Who is going to build a custom sub faster? Just wait for some of the best subs on earth.
- Happy Belated Birthday!
- Battery Isolator for a second battery install?
-
C1100.4-Need 6.5" components to match
Who CDT??? well any companies you would recommend for high power SQ at $600 for budget on both sets of door speakers? I would not do all four doors. Just the fronts!
- Battery Isolator for a second battery install?
-
Pontiac G6 with 2 Ethos 18's
Thanks! I really did enjoy building it. I hadn't done any amount of woodworking in quite a few years. I would change just one thing, the glue I used. I went with liquid nails, which doesn't sand very well. I'll weigh the whole unit when I take it out soon, as I'm curious. What you think, about 160lb? JAy-Cee: You have me considering swinging by Sears today after work. $100 less per battery sounds good! What do you have for electrical in the Acura?? Nothing in the Acura at the moment besides big 3 and agm under hood, everything besides the front stage is ripped out as im planning on upgrades and a new car. All batteries from here on out will be from Sears, those Diehard Platinums are the way to go. Yeah I would definitely go buy Sears and grab a g31 or two. But what are your goals?
-
WTB USED 10" GCON DCON
- Getting back into this, need suggestions
Take Alton"s advice, It's the install that makes subs sound great!- First car, desiring first sub
Thanks again, THX! That will come in handy as soon as I have the courage to open up the sub. xDIts not that hard. Just need to unscrew all the screws around the sub and take it out of the enclosure. And take some pictures of the sub and inside the enclosure if you canWhy does he need to take the sub out of the box?Well if it reads 1 ohm outside of the box it could be a dual 2 ran to 1 or could be a dual 1 with only one coil hooked up or something like that. You neverknow lol. And with the sub out we will be able to see port length and how well the enclosure was even built Or it might be the way the amp is tuned. If I read that thread right. He said the box said dual 1 coils. Who ordered the sub?- First car, desiring first sub
Thanks again, THX! That will come in handy as soon as I have the courage to open up the sub. xDDisconnect the speaker wires from the amp and see what ohm reading you get at those wires.Pretty straight forward!Thanks, pmureika! I'll post results as soon as I buy the dmm. Thanks again, THX! That will come in handy as soon as I have the courage to open up the sub. xDIts not that hard. Just need to unscrew all the screws around the sub and take it out of the enclosure. And take some pictures of the sub and inside the enclosure if you canWill do!Sounds easy enough. I can do all this as soon as I get off work. Should hopefully be a ten hour day today (possibly 12) but if I have the strength when I'm out, I'll get all this done for you guys. I really wanna start with the process of elimination so we can find out if it's me...or the setup! Expect a full on update of my attempts this night. I only hope I have enough time. If not, this weekend works much better for me. I work more like 4 hours sat/sun lately, so I could get pics for you guys then, and most likely a video of the sub in action. I had some downtime at work this whole time. I'm going to see if it's picked up. If it has, I'll reconvene with you guys when I'm free. Should be about 7 hours from now if it's time for me to put in work before clocking out. Do you have D2 or a D1 sub? http://www.the12volt.com/caraudio/woofer_configurations.asp- First car, desiring first sub
Thanks again, THX! That will come in handy as soon as I have the courage to open up the sub. xD Its not that hard. Just need to unscrew all the screws around the sub and take it out of the enclosure. And take some pictures of the sub and inside the enclosure if you can Why does he need to take the sub out of the box?- First car, desiring first sub
Thanks again, THX! That will come in handy as soon as I have the courage to open up the sub. xD Disconnect the speaker wires from the amp and see what ohm reading you get at those wires.- Subwoofer enclosure material - MDF versus Plywood
Depends on which grade birch plywood!- Please welcome SoundQubed to the SSA forums
- Happy Birthday ///M5
- seeking advice for a fantastic quality set up
Why are the 6.5's a bad idea? You just need front 6.5's. None in the rear doors to create live type music.- Dcon time. New Photos & Info
Great looking sub!- Need to add carbon fiber dust cap
It doesn't. It's there for looks.- I have a Zed Mikro1.
This is my goal to use a driver that fits the box specs an will make good use of amps power. Sounds like that is what I asked. Why do you always need the total goals? 1.3ft^3 Volume33hz TuningWidth 20 3/8"Height 15"Depth 15.5"- Why your charging system is so important
Yep you have to consider all the cars electrical draw as well as the amp or amps.- Did I miss something? 'SoundQubed'
I love their amps also but wasn't impressed with the subs!- I have a Zed Mikro1.
I don't have the amp with me. So I can't post any pics right now.- I have a Zed Mikro1.
What would you recommend for a sub? Needs to be a 10" 2 ohm. Going into a khaotik box. I am thinking a D4 Dcon. - Getting back into this, need suggestions