RAM_Designs

This is a tribute build for HelloMyNameIs at the SMD forum. His brother passed away, and since four was his favorite number, why not cram four of the new Obsidian Audio 15" subs in the back of his Jeep...right? The box will be 12.75ft^3 tuned to 34hz via four 6" aeroports. The bracing was a little tricky as I had to avoid the aeros and brace the top as well. Needless to say it took a little planning to make sure everything would work out ok.

Here's a pic of the vehicle in question.

Thanks man.

Big thanks for Brandon Fortson at the SMD forum for making me use my brain on this one. This will be housing a pair of Digital Designs 3512's and will be going in the back of a '69 Chevelle show car. The box is 5ft^3 tuned to 34hz via a 12"x6" port.

Ah, spell fail in the thread title.

Here's a fun little bandpass box that I did for Christian Gutierrez on the DSBP forums. This is for a 15" Crossfire XS V2 going in the trunk of a Pontiac G6 GT. The box is 1.65ft^3 sealed and 4ft^3 tuned to 45hz. The sub will be inverted with the motor in the ported chamber...obviously geared towards high output.

This thing is going to be heavy as fack.

I have thought about that, but it's really more effort than I feel like putting into it. Not to mention sometimes it's months between a design and a build.

I'm honestly not sure which model the 856's came off of, as the numbers get confusing after a while. But yes, it is a very stout box. Double layered on the top/bottom/sides/port, three layers on the back, and four layers on the front. The dark things in the design are threaded rod.

I know I just uploaded a vid today and yesterday, but I can't pass up this one. This is a triple 18" box for Stretch at the carstereoclassifieds.com forum. He will be using re-coned Atomic 856 motors and will be throwing them in the cargo area of a 2000 Explorer Sport. The box is 18ft^3 with a 32hz tuning via a pair of 14" tall x 9" wide ports. Power will be a pair of Crescendo 3500's. This will make good use of the term "Exploder." I apologize for Youtube's "audioswap" feature for not working lately...no audio ftl.

This one is for Greg Lucas on the SMD forums. Subs angled forward and port firing up in his 4-door Dodge truck. The box will go from his instrument cluster to the front of the rear seats, replacing the center console area...at least until he decides to to a blow-through box. Final specs are 4.2ft^3 with a 33hz tuning.

This design is for Josh Baksh, and will be going in the trunk of his 1992 Acura Legend coupe. The box will be sitting at the trunk opening with the mainly external port firing into the cabin via the arm-rest hole. The subs being used are RE Audio SX, 10" models. The box is 1.15ft^3 sealed with a 2.8ft^3 ported chamber tuned to 44hz. For some reason the audio is not being added, even after waiting a full day.

Lookin good! I use that same Bassotronics song all the time to do demos and vids.

Oh yeah, rear seats have been gone for a few years now.

Just looking to get some opinions on layout options for my triple 15" Dcon box. Vehicle: 2004 Dodge Ram 1500 4-door Box A: 10ft^3 at 32hz Box B: 10ft^3 at 30hz

That box could have been done so much easier and without being an eye-sore. But if you're happy with it, then good.

Fuses can handle about 150% of their rated amperage for a few seconds before they blow. And in your case, you probably aren't even needing to use all of that amp to get your W7 moving fine. If you actually put the amp in a situation where it could be pushed to the max, it can easily put out over 1500 watts. I clamped mine at a little over 2kw when I was burping it. Unknown distortion level though.

Indeed, man has epic hair.

Side note: customer is not related to Jack Hanna, the animal guy.

This is a dual 12" box design for Joe Hanna. This will be going in the cargo area of a Chevy Trailblazer. The final box specs are 2ft^3 in each chamber with a 32hz tuning. Overall dimensions are 46" wide x 15" tall x 19" deep with a 12.75"x4.5" port.

Here's a box for memphisBred at the *****.com forums. Dual DC Sounds Level 4 18's in 12.3ft^3 with a 35hz tuning. He requested to only double up the front as he will be adding MDF to the outside of the rest of the box on his own. Oh, and this will be going in a Ford Explorer Sport.

Do you think OJ was completely innocent as well?

Artist: Playgyrl Slim Song: A1 Time: 04:56 Genre: Hip Hop & Rap

This box here is for ThaWaxShop, who is on several of the car audio forums. This is for two custom 15" subs using the Soundstream XXX motor as the foundation. 3.3ft^3 each with a 32hz tuning.

I'll be running three of the 15's in my truck.