Kangaroux

I would have put the sub on the opposite side of where you put it so it wasn't right in front of the port opening, but besides that it looks good

Just noticed I forgot to put it in the OP...but a big thanks to Decaf for letting me use a lot of his material to remix.

SSA and Fi both use yellow spiders. I've owned multiple Fi subs as well as this xcon now and none of them had a yellow spider

SSA Doesn't use yellow spiders....trying to think of a company that does as well as using a 12 spoke

32hz http://kiwi6.com/file/nscu048g63 30hz, 42hz http://kiwi6.com/file/o24jc1m8g3 33hz http://kiwi6.com/file/uokk3zb4m4 29hz, 39hz http://kiwi6.com/file/31q49bx5yz

Now that the long weekend is coming up I'll have time to go through and finish a lot of the remixes that I never got around to remastering. Expect some more stuff soon

Where was the meter? Nice score for a 300w sub too.

$200 for that amp, final offer

I will when I get some cash lol...the only thing that seems kinda off with this method is the kicks aren't as pronounced on the lower end of them but that isn't too big of a deal

Been wanting to remix for a little bit now but was having trouble trying to find the best method of lowering down the volume of the kicks to match the volume of the bass without using compression (using compression causes the bass to seem quiet then get louder every time there is a bass kick). Finally figured out a method that works great and is easy to do, so you should be seeing more of this stuff from me hopefully lol. Song peaks at 32hz. Bear in mind there are little 23hz notes here and there so make sure your subsonic is set accordingly. http://kiwi6.com/file/fyeh706z9c

They don't have to be the same so long as they are both AGM...I run a batcap 2000 under the hood and a c&d 270FR in the back...two completely different batts but it works just fine

You know you want it...lol Of course I do...trade for an aq2200 and I make your next website at no charge?

Hmmmmm

Jello trick

Trying to figure out what is causing all that noise...I think it's just the door slapping the actual body of the car right where the handle is since the gap between those 2 things are real small. Gonna need some more weatherstripping...again...lol

What, bracing my roof? Yeah I tried to do it in an efficient fashion that would work and not cost much. It was either drop like $60-80 on deadener or brace my roof with some $2.50 silicone and scrap pieces. Glad I went with the latter I wonder if your method would hold up on a say a trunk lid... It's a nice idea.... Seems like it could work... It sure is an easy way of adding mass. If you give the silicone a good 3 days to full cure up I'm sure it would be hard enough to drop a lot of flex, but at the very least it should stop any kind of rattling. I used 3/4" ply just cause it's what I had lying around but I'm sure you could use some like 1/2" or even 1/4" - 3/8" project panels of MDF or something. You can use any type of wood you want, but heavier stuff is better because it has more mass. I highly suggest doing kerfs too so it can mould to the trunk too. Put a ton of silicone on one side and place it, and then fill up any gaps between the wood and the trunk lid. Then do a bead all around the wood to help hold it in place and prevent it from ripping out.

What, bracing my roof? Yeah I tried to do it in an efficient fashion that would work and not cost much. It was either drop like $60-80 on deadener or brace my roof with some $2.50 silicone and scrap pieces. Glad I went with the latter

Quick vid of it

I can do one for sure in the rear windows, still need to do some more bracing before I can do one pretty good up front. Also a quick update: I got the roof all braced up and finished and let it sit overnight. The PL needs 2-3 days to fully cure but I wanted to hear how it sounded. First impressions: a lot better. Because the silicone hasn't fully cured it sitll flexes a lot but all the extra mass is like deadening the whole roof, it's dead silent now. However I have developed more flex issues...my hatch goes a bit crazier (gonna need more weatherstripping) but now my rear door is LOUD. The entire door is flexing around, not just the top of it. I'm gonna need to find something to fix it because from like 28hz - 32hz it is even louder than when my roof was making noise before.

Yeah Fi isn't great in the advertising apartment, you do sorta just have to check out their site once and a while. But I'd rather have a company that spends their time actually working on stuff vs. advertising and saying they're going to release things and then they never come out. Plus, by not saying when something is going to be released, they don't have to be rushed and can take their time refining it and release it when they're ready.

Wow, that's crazy. Something tells me it was dropped at one point but not hard enough to actually crack anything, at least on the outside. Playing it quite a bit may have caused the crack to grow

I about forgot that Woofersetc and SSA stores sell Zed amps. Talking to Stephen is always good for learning something and a few laughs though... Sometimes I think I buy these just for an excuse to call him up and chat for a bit. JBL/Crown developed a problem in the input section. Cost me a hair under 300$ just to ship it out for repair..... NOBODY is jelly of that. Crown will be up for sale after it's been repaired. I really enjoyed it, but if Minotaur goes bad I can ship for < 30$ and I know Stephen will take care of me on warranty and even outside warranty it would be a cheaper fix than most of the Korean 3K's It's pretty musical as it sits now, I'm just looking for more passanger friendly. Amps strapped, each strapped pair driving 3 coils in series for 4.2 nominal load. With the in/out options on these amps it is VERY easy to slave all to one. I also ordered another Minotaur yesterday since I now own 5 neo sig motors, so 5 of something may be in my future as well. That's a pretty cool way of wiring it, never thought of that. On an unrelated note, I just finished bracing my roof and my hand is absolutely covered in white silicone. I hope nobody sees it and gets any funny ideas.

Hmmmm...nope.

I'm definitely gonna wanna hear this...really diggin the fact that you're switching things up and just going for a more musical setup. If you're running 3 15's how are you going to wire them to the 4 amps?