KyleBrown

1. Product: BC3500 2. Specs: 1ohm 3875 2ohm 1900 4ohm 1150 http://www.crescendo...em/bc3500d.html 3. Description/Condition: I'll say fair condition. Some dings and dents. Fully operational, I tested it after I pulled it from my car. I'm relisting this since the other previous buyer ran into personal issues and needed a refund. 4. Price: : sold NO TRADES! 5. Pictures:

I honestly got a head ache reading through this thread.... How is that port volume low? OP are you sure that port is long enough? I might have screwed up, but 4.6 cubes, 32hz, 70sqin of port I came up with a port length of 30"

Build a different box...

Nice job man!

that is scary looking lol

Rules get pretty tricky sometimes.

Kyle isnt saying anything is wrong with the zcons, hes just saying he hopes the new subs are even better.. Ur looking at it the wrong way.. Thank you.

Well aren't these supposed to be better than zcons?

Did I say anything was wrong with the Zcons? No.... Some of guys assume way too much. So they took double rms? I put over 3k to a 600rms driver... Only reason they popped is I did a demo after my run and didn't turn my subsonic back up. That's besides the point. I simply said I hope they do better. Implying, I hope they are louder i.e. helping you reach your goals....

Really clean truck. I like how he has it setup. gotta have A/C Tuned in for sure.

9-10" is standard for a lot of subs nowadays. I'm guessing those are 9.25" to 9.5" which are considered 10" spiders. I didn't say it was the biggest on the market. Just that it was the size of a plate. Just for my own knowledge, what subs have a bigger spider than 10"? And it does measure a full 10"+ I was just saying it's a small plate lol. I got fat boy plates Also wasn't saying there's a ton of driver using larger than 10" spiders. But sundowns new parts are slightly over 10" spiders and you also have the LMS ultra 18 using a 11" spider, but I believe I was told it's more like 10.5" I'm not trying to compare drivers, just sharing information. I hope these do better than the zcons. Any TSP's?

Looks freaking sick. I 18 looks like a 15 lol. What about boxes? Are we still looking at smaller boxes compared to other high performance drivers?

9-10" is standard for a lot of subs nowadays. I'm guessing those are 9.25" to 9.5" which are considered 10" spiders.

That's a small diner plate...

cool story bro.

Not that much power. I'd go on the bigger side for a box. They get sloppy eventually

Nice stuff you got going on so far

comparing a 1250rms sub to a 600rms sub? Maybe a Gcon to a SA but not Icon to a SA.....

That's sick. You got with the right guys. They know their shit on BP's. I bet this thing is nasty.

That's awesome

SA's are my favorite entry level driver. They take a lot of abuse and sound good while doing it.Yes I have use SA's

really nice work man. I'm glad you can still feel rewarded

I'm not claiming I've used all those drivers. Most of the drivers I've used are in my build log. There might be one or two that's not. Other drivers I've had hands on with aren't in my build log, because it's not my build log. So I don't know what you're asking about...

Its funny how you can comment on subs you haven't used and have only "seen used in big builds". Havoc = I was not very impressed by the driver, had good output but didn't wow me in any way. LMS-r = Great driver if you want to go sealed, didn't impress me in ported applications. Axis = Haven't used it but I have a LA Storm neo and it is a good driver surprisingly loud on low power, so if the AXIS is like the storm it should be a good driver but not for the price tag. ZVX = Haven't used and wont after the experience with the VVX DP = Haven't used, isn't my style of sub but have used IA products and one of theirs is one of my favorites. ICON = Good output low end is great. GCON = like the older ICON specs are very close, good output with good low end. What's funny is, the subs I use, you can't buy unless I sell them to someone. Or you build some yourself. Oh and it wasn't just "seen in big builds" God forbid I don't post up everything I do. But carry on since you're an expert in every driver ever made. Never claimed to be an expert but I have personally used and still have most of the drivers you listed or a variant of them. The VVX was the worst one. Don't get all butt hurt and then try to act high and mighty because you use franken woofers that you think are so special. The only person acting high and mighty is you lol. The word variant seems to be used quite excessively lately, which usually means squat. No butt hurt here either, since you're obviously upset about my woofers. Perhaps I'm a terrible reader, but you did sound like you were bragging with your drivers that no one else can even buy. Since Bromo and I opposed the skar drivers it must mean we're in some conspiracy group with the sole goal of destroying skar audio. We're actually accepting applications here: [email protected] Not bragging, informing. Not something you can buy a recone for. Like I said, too much negativity... If someone has a personal vendetta against a company, that's on them. It doesn't effect me either way...

Its funny how you can comment on subs you haven't used and have only "seen used in big builds". Havoc = I was not very impressed by the driver, had good output but didn't wow me in any way. LMS-r = Great driver if you want to go sealed, didn't impress me in ported applications. Axis = Haven't used it but I have a LA Storm neo and it is a good driver surprisingly loud on low power, so if the AXIS is like the storm it should be a good driver but not for the price tag. ZVX = Haven't used and wont after the experience with the VVX DP = Haven't used, isn't my style of sub but have used IA products and one of theirs is one of my favorites. ICON = Good output low end is great. GCON = like the older ICON specs are very close, good output with good low end. What's funny is, the subs I use, you can't buy unless I sell them to someone. Or you build some yourself. Oh and it wasn't just "seen in big builds" God forbid I don't post up everything I do. But carry on since you're an expert in every driver ever made. Sign of being butt hurt. Trying to act high and mighty. Posting experiences, not acting high and mighty or butt hurt. Not upset about your woofers as they have no value to the discussion, but you somehow felt the need to bring up that you use woofers that are put together from miscellaneous parts. I have noted where the variant came into the situation, but it still doesn't change my feeling that the Axis isn't worth the 400+ dollar price tag. If you weren't butt hurt or trying to act high and mighty, you wouldn't continue on this conversation in this manner. I really don't understand why you're so upset. you and a few others with your continual negative attitude on here really hurts this forum. I already see other members posting elsewhere because of it. But for shits and giggles post up your builds with all these various drivers.