Everything posted by frogcase2002
-
The EVIL 6.5" Midbass
I havnt used a car audio mid or tweeter In an Install for years
-
The EVIL 6.5" Midbass
What tweeter are you using
-
2015 Ford F150 System suggestions and ??s
I would avoid shallow mount subs if you can
-
Amp Test Tuesday: IA20.1
Would love one of your 80.1s for my zcons
-
Left tweeter seems to be dying, sounds weak
It still could make contact with each other and or metal somewhere if you just cut it. Make sure you tape any wires that are not connected to anything on one end
-
Left tweeter seems to be dying, sounds weak
Always good to have some extra electrical tape around. And its cheap
-
Left tweeter seems to be dying, sounds weak
Where is the crossover and tweeter located? I wouldnt just cut wires. . If your having to take out the crossover and tweeter anyway you mite as well just unhook the wires instead of cutting
-
Left tweeter seems to be dying, sounds weak
Depends how they were installed. . And it would be great to learn things your self
-
Left tweeter seems to be dying, sounds weak
Did you switch the left and right tweeter and see if it follows the tweeter?
-
The EVIL 6.5" Midbass
I will be making a baffle for the door panel In about the stock location. So the bottom of the door probably around 90 degrees off axis . Was thinking of mounting tweeters there also. Could maybe find a different spot but there Is not much space anywhere. . It will be In a 93 cherokee
-
The EVIL 6.5" Midbass
I will probably just have them right next to the mids In the doors
-
The EVIL 6.5" Midbass
any tweeter recommendations to use with these in a 2-way active setup?
-
HDC3.115
Probably daily driver
-
Cone Area & Cone Extension
Usually the enclosure has alot more to do with the frequencies produced than the size of the sub
-
high output alternator
Nevermind. Alt ended up not fitting
-
high output alternator
-
high output alternator
-
SSA now carries NVX Audio (off topic)
Yea I would forsure like to see your spl and sq builds
-
high output alternator
Need some help with my alt. I have an ohio gen 300+ amp alt and it was bought for my old caravan and had a plug harness so it was able to plug into the vehicle plug . . Now I got a 93 cherokee and the alt will fit but on the jeeps stock alt instead of a plug there is 2 wires next to each other bolted to the alt rather than a 2 pin plug. . then a ground and power for the alt. . I know the 2 wires on the harness on my high output should connect to the 2 wires that are on the jeep that bolt to the stock alt but how do I find out which one connects to which?. . Let me know if that doesn't make any since and ill try to explain it better lol
-
Can this be repaired
There are also hyundais and kias and others that look like jaguars and other vehicles but there nothing alike . . Looks dont really mean anything
-
Can this be repaired
There are also hyundais and kias and others that look like jaguars and other vehicles but there nothing alike . . Looks dont really mean anything
-
Single twelve build - need ideas
Why do you have such a big enclosure for that 18 anyway
-
Single twelve build - need ideas
Why do you have such a big enclosure for that 18 anyway
-
Single twelve build - need ideas
Why do you have such a big enclosure for that 18 anyway
-
Can this be repaired
Amazing goop works pretty good. Wouldnt look the best though