1200 bandit

2volt works fine you just have to set your gains properly.. Currently I run a 2ish volt output and I have the gains set at less than 1/4 with no boost, nothing.. I get almost 3500 watts out of each pair of amps--they're only rated at 3k per pair.. **I do need to mention that I do run the amps at 1 ohm per pair (instead of the 2 that they are stable at.) with rise at my burp freq's it's roughly 1.5-1.8 ohm.. Higher Pre-amp volts are normally better. Your massive amp is only rated for 5v---well that is if they're like the P-series amps... I've had some amps clip out from too much input voltage--just running a 5v head unit *Kenwood, Bazooka* Good deal and the box is done.

Box design looks nice

OMG, IM SORRY I THINK THE UNIT SUCKS o.k. On this unit you can't turn off the bass center frequency you must use it ( 60hz to 180hz) no flat. The bass focus delay affects the subwooter timing.Pause button takes 10 seconds maybe more before music play back. You never just get answer here. Are you talking about the low pass filter??. I think you're confusing that with something else. And a more detailed question would work, because I don't think I've heard of an SPL Deck...Like others said maybe you want something that doesn't skip, or that can pause. No it has a x-over ( flat 80hz 120hz 160hz ) an that bass control / bass center thing, it's like a bass boost that's allways on.

Thank you man, and yes the unit skips. Will a 2v unit be o.k.?

OMG, IM SORRY I THINK THE UNIT SUCKS o.k. On this unit you can't turn off the bass center frequency you must use it ( 60hz to 180hz) no flat. The bass focus delay affects the subwooter timing.Pause button takes 10 seconds maybe more before music play back. You never just get answers here.

I love the engine, keep the pics coming.

Hi Guys, I need a good head unit for spl, so what you got. I have a Alpine cda-7995 receiver rigth now, it is the one with no internal amplifier. It is good for SQ for sucks for SPL. So what will be a good head unit?

Just 2, SSA and Massive Audio

What size is the port? Box looks great.

O.K. so you are back in good with Sundown now.

Man you did it that thing it bad!!!!! beer on me.

Nice work

Good post very helpful.

What's the price without the motor?

Man you doing a great job I love it!!!!!

You can make your own ports out of pvc ,check out www.subwoofer-builder.com

Port on the rigth works good for most cars but you will need to test because no 2 cars will be the same.

No No that's crazy under rating but Sundown.

Yes that is very true, the Audioque is rated to do 1860 watts at 2 ohms at 14.4 that's 540 watts ( 2400 watt ) more than the rated 2 ohm power.

Bad things happen when you use that button.....Bad things.

Give D.J. a call a Audioque he is a good guy and likes to talk, he can help you get the rigth set-up.

yupp i posted this topic before i sent him an email... cant wait to get it back! Let us know how things work out, and hope your back in the game soon.

The Audiopipe 3500 is a nice powerful amp. I have a Audiopipe 3500 an a Saz 3000 both are nice clean amps.

The Audioque aq1200d is a good amp but that sub can take more power. I think it will be safe and still loud with that amp. Good luck. G