kryptonitewhite

lol uh yeah! I wouldn't mind a set of cheater/adaptors to mount my 2nd alt though, so i can get more power from the four AP30001Ds wink wink

thats the idea ;)

AS COPY/PASTED/POST WHORED ON ALL THE OTHER FORUMS...ALL IN FUN...COME ON, JUST LAUGH NICK, LAUGH AT ME IF YA GOTTA, BUT LAUGH! My woman was using the stereo in the van and had it up too loud, she turned them inside out and I caught it on camera! Time for more recones Here is where I was told they pulled IB3s from the FiCar lineup and are switching them to Blue Print Audio HT lineup cuz people keep turning 12's and 15's, less cone area, stiffer, same motor, inside out. When will IB3s be available? - SSA Car Audio Forum The quote itself:

all the time, I tried to bend it like that by hand and couldn't get it half that far, got me stumped!

you got a vid of it? link me man!

I don't think it will either, was hoping you knew something I didn't. It's very difficult to get the stock location alt in and out as it is Could you make the two adaptors to the AC compressor bracket?

There is only one at the moment. I am trying to see if I can get a bracket made for another. Its hard finding things for a dodge. I may switch to a 14v setup in the future. whats your voltage now?

right on thanks pdubb!

It will be just 2 alternators. To fit any more it's really necessary to move some things around under the hood. Since most people want a quick bolt on without replacing or relocating things it's not really top of the list. If there was a big demand for it I would look into it more as I know at least 3 will fit, but to make just 1 or two it would be so expensive I doubt I'd even sell that 1 or 2. I thought things had to be moved for even a dual 4.3 gm/chevy, at least on the Safari/Astro. If this will work on the Astro, even if I need to do some mods that i could pull off myself, you already have one sold.

how many alts you got in there? even underpowered, more cone area is more output per watt...better efficiency

lrn2pirate Bittorrent ftw. Though I do occasionally buy some stuff on iTunes just to throw them off lol googled that, found nothing, post edited??

I don't have them and I have a buncha Gucci! My Limewire doesn't work anymore, so i tried Frostwire, shut down too!

requested "whats in it" vid and DBAudio's latest track, "25Hz and 30Hz bass test" Iraggi 220A alt, G31 AGM batt in front from O'Reilley, (2) 100aH AGM O'Reilley in rear, cheap 0 gauge, Alpine IVA-W505 touch screen DVD to interface with digital PXA-H701 X-over, (4) Vifa XT25TG30 1" ring radiators 14kHz on up 66dB/oct off Kicker SX500.2, (2) CSS FR125S 4.5" XBL^2 full range 710Hz-14kHz off KX650.4 bridged, (4) Adire Audio Extremis 6.4 XBL^2 mids 80Hz-710Hz (2) KX850.4's bridged (4) FiCarAudio IB318's off (4) Audiopipe AP30001Ds 10Hz-200Hz in 55 cubic feet 20 inch diameter port 22Hz tune. 140 can Great Stuff expanding foam, (5) layer MDF wall backed by 2x6 frame. Toggle switches for each set of speakers, can play whatever set I want.

I get a lot of hate, starting to see some love now with the subsonics and super low songs, thanks for the support, a little cocky here cuz of the haters but its all in fun. master p if them feds only knew killin my voltage, camera cant capture how loud it is

FOR FUN. I was in talking to the guys at Van's, local alt and starter rebuild shop, decided to throw the 300A Excessive Amperage alt on the bench test just for fun, knowing full well it couldn't measure peak. He got it up to 140A till the belt slipped and couldn't take her. I asked him mid way through if I could record it, he said yes and jumpped back lol...so nothin really to see, but oh what the hell. Thanks Van's and thanks Nate at EA!

i have a lot of Gucci, some of the best stuff on my system, I even made a disc the other day with nothin but that on there. I'll look for those songs! Unless they reach below 30Hz, though, they won't be very impressive... but of all the music I have, thats the lowest.

Graham, my buddy, saves the day once again! I have tried burning this track as wma, mp3, cdda, wav, audio, iPOD and nothing would work. I redid it as "audio" and this time worked, IDKY it didn't before. I even emailed back and forth with Bassotronics himself, jarofwar at yahoo, paid him a dollar to email me back the HD version. Well here it is, 18Hz center frequency, sweeps down to 13Hz I believe! Thanks Graham! Thanks Bassotronics!

put on remix, much louder on the ear than love for money but not near the flex. still fun!

$100 plus shipping to anyone that can build the two adaptors pictured. The hard part is getting ahold of a van like mine to measure and test fit and getting material if you feel it must be done with aluminum. Steel is fine with me if you can make it work! wooden test fit wooden mach-up

Thanks guys, tomorrow when the boy is outta school we'll try Put On, same/similar low note 25Hz

This one is better in a way, IDKY but during the day it seemed louder and moved further... warmer temp? But the camera sucked, normal light combined with refresh rate? I really don't get how the window can move that far without busting, I tried by hand and couldn't move it 1/2 this:

I know some do, but a lot don't for some reason. I still see threads pop up here and there with heated arguments. I am all about free-air break in for long periods of time near Xmax, as was attempted with these subs. The subs in this vid I reconed, broke in just playing around with a pair of EP4000s in my house, then I had them in my towers for a couple weeks until the brand new subs came. I guess I am a lot harder on them in the van than the HT reconing four of them free air break in putting them in the ht after break in beating them up in the HT still in the towers, new ones on the bed waiting to be swapped out thanks, and for sure! soon as I get the 2nd alt brackets, I can turn the sub level up!

Troy, no go on the Limo Expedition Even if so, I still had to install the 2nd alt and touch up the ugliness lol Thats what i initially thought at the inception of the van build: Astro's everywhere in the arena! wtf??

from inside while crusin