kryptonitewhite

Thats silly string all over, the black lights and colored lights light it up... looks cool in person, dirty in pics so 2 of my gaskets were warped from sitting outside and were rubbing the surrounds so I took em off. I get the new 4 any day now, Ill put the new ones in the HT and use these in the van. built shelves to set stuff on on the sides of the bleechers. wish I couldda got the crackhead to help with that back during summer, much better speaker placement means everything got the four 18's today for the VAN, decided to put them in the towers cuz I am getting serious buzzing I hope the new gaskets will cure, and my reconing job was as pretty as my speaker stands

my camera sucks, trying to clean it with rubbing alcohol Of course speaker placement changes everything, I knew that, but my initial plan was ordering six 21" Maelstrom-X's and 14 Anarchy's, doing seven MTMs for 7.1 surround. To get me buy until then I was just gonna use those cheap walmart cubes, but they work surprisingly well and I just can't afford better for now. They are HIDEOUS and one has a bad stain, so I tuked them back into the entertainment center to hide them. Well with the added two 18's my substage SQ went way up, so Ive been doing more critical listening (sure those cubes are as bad as it can get, but the receiver sure milks them for what they're worth) and I just couldnt take the "tunnel vision" from them being 3' deep between the towers. I brought them out, real ugly I know, but OMFG! I had to back things down 2dB off the batt, but even my woman looked at me right away like "wow, did that really just happen? Did that really change things that much?" Cuz now it's actually surround, not mono muffled The surrounds faced forward, were hard to hear, now theyre standing out like they should.

http://www.avsforum.com/avs-vb/showthread.php?t=1231247&page=11 So my lady wants me to build some ugly stairs to go with the ugly clown room, and I wanted to test the Towers to see how much of the flex is pressure VS driver vibration... if it's mostly pressure and I need to brace all 6 sides, I need a minimum of 40 2"x4"s, 8 front to back each, 8 side to side each, 4 center to top each. But I put some white stickers in diff spots to see if it was the same flex all over or just by the driver. Lucky me! 24Hz is where it is worst, but a few Hz in each direction and flex is minimal. Took the drivers out of the 10 cube box, put them back in the towers. Ill most likely put the 2nd driver's on the inside top otherwise outside top here's the vibration vid

How much?

http://www.oreillyauto.com/site/c/detail/OSSU/AGM31T.oap?keyword=deep+cycle

SSB AGM31T $189.99 SSB 34/78EXTAGM $139.99

Do you have an Astro/Safari available to take measurements? I can take measurement pics... been thinking about pulling the compressor out.

Blade got back to me, he's considering doing a run of them, but overseas shipping would be a killer. There's a guy on caraudiotalk.com that'll do them for $25 with measurements, but I can't get the measurements from Blade, and I can't make them without the alt. rock/hardplace lol

well my Iraggi failed, and Ill let you know how the EA holds up

just ordered a 50 foot spool of ott, four recones, and 24oz recone glue... dropped a grand tonight :-/

looking to add amperage to an 01' Astro (Safari) with 4.3L V6 Sounds like Troy has something lined up, but doesnt hurt to post here in case you already have something edit: just saw 2000 gmc jimmy 4.3l v6 dual alt kit lemme know when thats finished interested in the 4.3 bracket as well... maybe these will help you out. I am trying to get ahold of this guy for dimensions of his adaptors, maybe the OP can fabricate them? OP, if you can make these for me, shoot me an email and your PayPal kryptonitewhite at hotmail thanks http://www.talkaudio.co.uk/ipb/index.php/topic/294453-ascendant-audio-chevy-astro-the-mayhem/page__st__380

just bought a 200idle/300peak from EA

alt it is, thanks guys! any idea when (if) iraggi will be back? Everywhere else wants almost $100 more for the Iraggi I have.

well for any system, if you have more current draw than you can support, what would be better. batteries or alts. whether my sony xplode 1000 watt peak amp isnt getting enough, or my 16 SAZ4500Ds, if I need more either way but can only do one, alt or batt

I need some more hate. So here's some more material!

I cant do both. I have one Iraggi HO alt rated 160-200A @ idle, 220A peak should I add 1 more bigger alt to the AC bracket or add 2 more 100aH Oreilley AGMs, Intimidator knock offs

looking to add amperage to an 01' Astro (Safari) with 4.3L V6 Sounds like Troy has something lined up, but doesnt hurt to post here in case you already have something edit: just saw 2000 gmc jimmy 4.3l v6 dual alt kit lemme know when thats finished

i didnt think the 22's would come through, but this is sick any way! I was winded carrying 6 in, poor wife!

badass

I know exactly what you mean about a few mm making the difference. I bet I've installed and removed the brackets I'm making now about 6 times each, so I start to see where things are a pain on the user side. I'm doing my best to make sure installation of my brackets is easy for the end user, or at the least can be done by one guy with a few wrenches. Thanks again for your patience, I'll keep updating this forum as products become available. do you have an email to get ahold of you at?