poundindak69

so you have 5 of these? nice!!! one pair use to be mine pretty sure you did over on ca.com

ok just got inside from doing some testing and im 100% positive its the magnet vibrating that i can hear so i guess that means it done for. good thing i just picked up a 12" icon

i ahve the sub wired at 4ohm so thats around 600 watts on it, and i get the sound even with the gain under what it should be at, thats why i asked Humm, I wonder if the sound is the cracked magnet moving. idk mayeb ill check that out also tonight

i ahve the sub wired at 4ohm so thats around 600 watts on it, and i get the sound even with the gain under what it should be at, thats why i asked

oh ok cause i didnt notice a crack when i got it, and ill pull it out and make sure it gots a good seal on it.

you can hear it right before the end, its alot clear in real life also here are some pics of the crack

ok so i jsut put the icon in another box and put it on my massivep1500.1 and on the high notes below like 100hz it sounds like its bottoming out kindof like a rattling thudd, and it looks as if it gets sucked in instead of pushed out, and i have switched the leads on the amp jsut to make sure the leads werent flipped

welcome

not to be a party pooper but with 3 30 amp fuses i doubt that thign will even come close to do 3500 watts rms, someone who cna explain clipping better will chime in on that

so you have 5 of these? nice!!! one pair use to be mine

welcome

ook

so is it open again cause i have a few amps ready for ya

i would like to see it come back, im a responsible young adult with working equipment.

no it hasn't been dropped, i have taken care of it since i got it, lol. me either , but ill contine to use it and see if anything goes wrong and ill report back.

let me try to describe the crack it is horizontal with the magnet meaning it goes all the way around like the magnet, so it like split one into two. does that help?

You got any pics? On a side-note: Are you still interested in the Icon? I have quite a few others who are. no pics right now at work, i am but the money i am waiting for hasn't came threw yet so you can take the other offers since i have no money yet, but thanks for holding it for me

yesterday i took my box with my icon in it out of my car because i had a leak in the trunk and it ruined part of the box. and when i took out the icon out of the box i noticed that the bottom magnet had cracked all the way around it. is this something to be worried about? sub was in a box 1.35 cubes at 32hz pushed by a saz 1000d set at 1000 watts. and the sub is no more than 3 months old.

nice sub and box design. you still trying to sell that icon?

box design looks sick as hell man

welcome to ssa

i could probably design a t-line jsut got done with one for a pair of p2 8's and it sounds great, so if you want i can get one done tomorrow for ya.

mmk ill do one as soon as i get the xcon

This question in a sense is a "loaded" question. Of course cone area plays a factor, install plays a huge factor and power plays a factor. I wouldn't even venture a guess on this question unless I had them both in the described setup to compare. Sorry I can't be of more help, it's just one of those questions that has an opionated answer. If budget is a factor, I would go with the ICON combo, it it's not, then go with the XCON combo. They both hit hard. I would say in my opinion that maybe the XCON will hit harder, but again, thats just my opinion and not necessaraly fact. x2, something is telling me that the 12" Xcon would do a little more than the 15" Icon but I think that would be a close fight (that would be a good comparison if someone owned both subs and would be willing to test them out). well i may be able to do a similar test with a 10" icon and a 12" xcon in the near future if need be

welcome