Aaron Clinton

What is the specs on that amplifier?

Some how have to make it home and back down to the city in 2 hours during rush hour for championships tonight.

DO you have the measurements ? As is: 11-1/2" X 2-1/8" X 8-1/4" for a Nak or 12-7/8"L x 11-3/16"W x 2-3/8"H for a PG or 8-3/4"W x 1-11/16"H x 7-11/16"D for a sony or 6.6"W x 1.7"D x 9.5"L Lanzar (ran at 8ohms mono assuming your sub is dual 4) too big?

T-1.5

I didn't want to get on your case too much, because I suspected something happened. I too hope the losses are minimal Mark had just gotten a bunch of code adjustments done and we had just brought on CYV. I have been back on forth with the host every few hours for the past 2 days, even before the HD failed I had sent a ticket in for slow load time. If I knew then, I would have tried to rush a back up.

Where is the motivation?

Adrian, I have been working on getting CA-F back up. Data center HD had a failure and all was lost. But I have an old back up at home and hopefully not too much was lost. There is a temporary url until the original url gets repropogated, I will send out a newsletter explaining the whole mess. Not happy at all.

Red is gona' getcha

Planned perfectly!! I am trying to delete old images or uploads that might be pulling some. But the way the charts are showing, we will blow right past our limit this month. Constant growth is good, and it would sweet if we could be top 100k like DIYma/ROE etc. But not at the expense of low quality content.

I was close, we ran up to 97.94% of our bandwidth.

I am sensing some pictures will be added to this topic soon.

Personally, I prefer less chrome. SO maybe #4.

Perhaps your employee needs a box building lesson. Based on the record of the BTL's, I am going to have to agree with you. Popularity has to start somewhere, and plenty of people proving time and time again what those drivers are capable of is not hype.

I think the fact of doubling the cone surface should really do something for you. My vote is go for it, because you don't want to end up selling one off and having the "WHAT IF" feeling.

Welcome to SSA Dillion. Going to move the topic into the Fi section where Fi techs and customers can help.

The chat room here has been around for a little while. It will get busy now and again. Mark recently integrated with the database so that you don't have to log in, just click the chat link at the top and TADA!.

Welcome, you came to the right place.

Welcome to SSA, love that car.

I got a number of PMs and emails though here and a few other sites asking the same thing. But as long as people know we don't have pricing set because the drivers are not finalized, and we don't have a date set because the drivers are not finalized, then it will be easier. I would love for us to eventually make it to 4 sub woofer lines, but we can only move so fast.

I am really happy to see you like it. Wait until it fully breaks in!!

From what I gather, the Nightshade and BTL have the same end goal. But with the Nightshade being spanking new, I don't anyone has been able to compare them yet. Jacob would be the best person on the Nightshade details. Very nice! Also wondering about the comparison to the BTL, any word, let me know. it's between the two right now, Ps: Does lower fs = plays lower frequencies better? The Nightshade is so new, I am not sure there has been any head to head tests with the BTL (which is getting a new motor stack soon anyway). As for lower fs, there are many factors (much of which is the install) that effect the reproduction at lower frequencies.

Our hope is to have 3 full lines going by the end of the season. The rms wattage is not set for the prototypes Mark (two 15") and John (two 18") are testing, and the soft parts are not set yet either, so the rms could go higher. This will probably come 12/15/18 in size. There is also the pure SQ line that we are really trying to get going very soon. The first being the 8" a few have seen the initial prototype picture in the other thread, followed by a 10" and 12" sizes. The rms range is aimed to be in the 350-500 rms range. But once again, parts/design are not finalized so rattings and costs are not set either. This model will eventually come in 8/10/12 in sizes. None of these drivers are under the Icon model name or line. So before any repeat questions... No the pricing is not set, we do not have a presale, the date of release is not set. We are really trying to get them going as fast as our testing and SSA standards will allow, but money is our limiting factor as always. All drivers will be hefty in design and sound good. We are also trying to see if we can fit in and afford a high rms & xmax driver, the design has started, but that is it for now.