thedukey42

Awesome seats & cool picks. the field goal was clearly good What was the dessert tray like?

He's still waiting on more equipment to come in, he mentions it in his first post. I can't wait to hear this, going to put my 18 xxx sealed to shame, lol. Oh well, I'll just be pumped to see your setup, let alone here it!

Received & thanks!! Scottie 2 Hottie FTW!!

Cool and thanks! You can email it to [email protected] or send me a pm, either works. thanks for all the help, nate

pics pics pics!!!! Really want to see this.

Just wondering if you could send me a tracking number if you get a chance, whenever it ships. thanks again for the help, nate

Did i just make a fool of myself & not know it? or you talkin about the massive collection of subs?

Close, but still too big, it's the Tang Band Neo 5.25's! here's pics with the sundown X18 proto In numbers, they will conquer! See, they conquered! haha Now can you help Jim? lol I was waiting to see if you'd respond initially in the thread.

think their replacing crunch subs & he's putting a couple 10kws maxxsonic amps on em

Ha, forgot to mention what they were, well, I'll leave it at a guess. It shouldn't take long, but I'll see if anyone can guess. no that's not it flakko

So I'm going to be using these little monsters in my dad's stereo & possibly in my own. I figured I'd show you guys some pics of them & ask for any ideas. I'm going to give my dad 2 & use 4 for myself. My question is what kind of enclosure should I use. Mainly asking about the 2 for my dad, I have never built for home audio & am working with a fairly large room. The rooms 20 x 14 with a 17 ft ceiling. Just looking for any help or links at all. thanks, nate the army!

Scott, I have to comment on how you knew what sub I was talking about right off the bat. I'm quite stunned you knew it was my sub by my bleak description. So yeah, good memory! ha

Thanks for the update sir, can't wait to get it!! No problem at all about the delay, just glad we found it! nate

Just wondering what you found out about the sub. thanks nate

Thanks scott, my email is [email protected]. I'm just curious as to where it is, no big deal if it hasn't shipped yet or anything, not like you're sittin back & doing nothing. Can't wait to get it!! thanks again

Wondering if you could contact me or Corey Anderson in regards to a 02 XXX motor & recone. I know you've been crazy busy, but the sub was getting ready to be shipped before Finals & now no new updates. Thanks for any help! nate

What other methods are there? Haven't heard of many in my young couple years so far. Thanks for any more info! To the OP, I don't recommend having a response of "no" to the first response you get, he is most likely right that you have your gains set incorrectly. Good luck w/ finding a solution, ton of knowledge on this site.

You could take a piece of tin foil & spray a little bit of WD40 on it, then rub that on the rusted spot. Trick my boss taught me, he works on old motorcycles a lot. If there are any problems with this, please let me know, but it has worked in the past for me.

I have the opti 6000D, had it benched for me & it put out 3500 rms @ 4 ohms. Was benched on 2 yellow tops, 1 up front & 1 in back. Did very well & was efficient. Edit: After rise during the bench, it did the 3500 rms @ 5.1 ohms I didn't have the 2 ohm & 1 ohm testings done because we had no subs that could take the power! I am currently using it in my car w/ a 70 amp alternator, stock front battery & Kinetik 2400 in the trunk, I have a constant 14.5V reading at normal listening levels, when I turn it up I have a 13.5V reading, so for me that is not a bad dip at all, but I am not sure what a bad voltage drop is. I assume it's 12.5 or below. Hope that helps!

I would but don't have a camcorder. I could borrow one...how do i go about posting a vid ? Same way as you do pictures ? Photobucket ? Use the video host provided by ssa!!! Great box man & well done on the carpet, def. try & get a video loaded on to ssa's video site! congrats here's the link in case you feel lazy, lol : http://www.teamssaudio.com/video/

Port your TC3k & give it 2K rms. Then after that, think about switching subs, should keep solid sq & plenty of output! let me know if you want help w/ box plans, I don't know how good you are w/ them, so if you're sweet, I meant no offense, just tryin to be helpful.

Only reason sundown isn't all over this is cuz of finals. But I gotta say, this is bad ass!! Anybody from the Cleveland area? On a huge side note: Thank you for your service!!!! Hope you guys get hooked up when you get back!!

Dangit. You had me all excited there for a bit, was all pumped you were in the area. Oh well. Bump to help you get some answers.

what k-state? kent state?

lol, corey had a bit of a mental lapse when building the box one day. I'll let him explain, but keep in mind the guy doesn't do well w/ mdf & it's very dusty nature! lol please corey, do tell! haha