KU40

I don't think devising a plan to hide a gf's body is a national terror threat. It's a domestic disturbance, get local popos for that.

Go State!!!!! We are going to crush you guys this year. *I hope....* Well they just won 29-0 over La. Tech. That doesn't say anything. I don't know much about KSU's program this year, did you lose a lot of players? We lost our best corner, offensive lineman, and running back, along with a good WR. But we've had a number of other players step in really well to replace them so far. Well, except for running back. Nobody seems to want to play there.

It's not a problem for the RCAs. However you do run into problems with the remote turn on. Usually if you have 3 or more devices hooked up to it, you'll need a relay.

Yo Adrian! Happy Birthday

They are looking really good this year. With their relatively weak conference......BCS game possibility? Assuming they play as well throughout conference as they are now. Granted, VT and WVU may have had some of their own problems during those games, but some credit has to be given to ECU. They'll be ranked next week I bet.

I was Told it did ??? will call Grizzzz @ Soundstream and comfirm or deny,,, as for the im a Main Stream sub guy you obviouslly never caught my RANT on JL / RF Su@k Threads... i know i know here we go agine... the truth is i Collect Bigg @ss Subs with Bigg @ss Motors that can handle the 2x SAZ 3000d amps i use... i.e. the newest Monster in my collection a CUSTOM built Pierce Audio 18" MOAB with 74lb Motor, & all the goodies they can cramm into a single sub maybe do a lil research before you call someone out !!! yours trully FanBoi ??? whatever the h@ll that is ??? Is your name Peter euro? I don't even know what you are talking about or why you think I was directing that at you. Unless I quote your post, I'm talking about the original poster's topic. Notice I was talking about marketing, were you? wow you got defensively quickly, and in a big way.

i just read that he has 4 group 31 batts, a 200+amp alternator and after he typed it seems like he coulld pull it off. dont be mad big baby. big baby? Seriously? Are we in grade school? What's with this name calling. Grow up and learn how to make an argument without name calling.

no, voltage doesn't change. For the most part

Only bad thing is that now I just hear all the interior rattles even better. I popped my driver's door panel off the other day to check for deadening and I think I induced another rattle or two out of it. I did it hastily so I may not have gotten one of the snaps in or something.

If the deck is all you have, they'll do as good as anything else.

Did you have any bumbs on any private places the next day? Heck no. It wasn't a random bumbing.

156 square inches from the front of the port to the back of the box on the inside, thats without the baffles ? Port area is the size of the opening to the port on the front baffle. By the looks of it you have 123 sq. inches.

Why don't you want to ground in the trunk? There shouldn't be a difference.

Where are you going to put the speakers? in little boxes under the seat? I agree about the factory system, I think it'll be all right. Head unit should only be pulling 1-2 amps most of the time. Might cut his range in half though.

I got some nice bumb action last night

Finally got rid of the front end rattle. Sway bar bushings where it meets the frame. Finally an end to the 1.5 year annoyance. And only 80 dollars.

Oh do explain. Ive never heard of either. Well you know MDF is Medium Density Fiberboard, right? Why would they call something medium if there weren't other products above and below it? Though I wouldn't think HDF would be lighter than birch, if the name is correct. High density should weigh more than medium density, right? LDF, maybe, but I've never seen that.

That's very normal. 14.8 may be a bit high, but a higher voltage right at start is normal. This happens for two reasons. One, the engine is cold, and as we know, cold electronics run more efficient. And two, your battery just got drained a little from the starter when you started the engine, so the alternator kicks it up a notch to help recharge the battery. Then after you drive a ways the engine both gets warmer and the battery gets recharged, so the voltage goes down.

half day of work today!

as John pointed out, both.

ah you lose for using the correct word!

anything smaller than 12 gauge I use my wire strippers. Anything bigger I use my knife. Just need something with a sharp edge, you know.

All good and valid points. I think I remembered figuring up that I would save 15 lbs by going with baltic birch, so you're probably right about that 1/2 sheet mlstrass. Which isn't very significant, sure. Fiberglass has been recommended to me before as well, and I'm still thinking about it. I've never done it before. I'm doing this box in my hometown, 3 hours away from me, so it will have to be a fairly quick weekend project. I'm not sure fiberglass lends itself to the "quick" crowd. But would be interesting to try. I slapped some resin on the inside of the box I have now to help seal and harden and all that. Seems to work pretty well, but how would you tell without building another box without it, you know.

Glad you picked something, but I'm not sure why going from BTLs to BLs changed your mindset so much. It's still two 15s and you're just going from the #1 to the #2 sub in their lineup for SPL. Could have powered both with the same amp, had the same box, everything.