Thumpper

Hybrid Horn for a pair of SAA Icon 10" 2.50cf3 tuned at 30hz

finally got the clearance to ship to Africa........ will have install pics from Tanzania soon

I ship anywhere but shipping from Canada does cost a few extra $$$

really old post I beleive he e mailed me also

my enclosure prices have not changed... something REALLY custom would take longer and cost extra

that's labour costs only....... all other shops are charging $75 to $90 per hour strait up

the shop is now functional... these are the Labour rates I am charging ( the other local shops is going to hate me ) ( $50 per hour ) .....................................up to 4 hours ( $300 per day "8 hours" ) ..........jobs taking a whole days up to 4 days (save $100) ( $1300 for whole week " 8 hour days" ) .....................jobs taking a whole 5 day or longer (save $200)

the Premier name no longer exists..........this is the Pioneer stage 4 series.... even being a Canadian Dealer I was only able to get my hands on one unit and I'm not selling it...the quanity is limited in Canada

I carry Pioneer so I get a little better deal than $1400

I already have mine ordered.....it should be here at the end of March/early April

awsome......

Pound That Sound is an Authorized Canadian Zenesis Dealer ZEC / Zenesis Electronics Corporation the ZN-502 security/remote start is installed in the PTS Ground Pounder ..flawless smooth remote starts and the Alarm is really loud and annoying...LOL

there are alot of different opinions on this subject.... I have access to a pair of 3A-M5 monitors powered by a VSP Labs amp and pre amp fed by a seperate Transport and D/A convertor...the sound difference between some RCA's on this set up is night and day... BUT..you have to go to the pure OFC Directionals and the Silver Crystal content before it's worth it BTW...Monster Cables were some of the worst we tested.. the $100 monster cables had no better performance than the $16 Stingers these guys make the best RCA Cables I have ever had the pleasure to play with.....both the Copper and Silver Crystal are just phenominal http://www.zzyuhui.com

brings back memories....... I made some folded hornes like that for City Limits night club in Kelowna about 20 years ago for some 18"........one unloading from each corner of the dance floor

here's the Link http://www.facebook.com/gettingstarted.php#!/profile.php?ref=profile&id=100000734127392

for those computer addicted people.... I just added Pound That Sound to my FaceBook page

I beleive the older model does not have the 24 bit burr brown D/A's either....... could be mistaken though personally I would have them send a current model and ship the old one back

LOL.... you REALLY need a Pound That Sound enclosure

I'm going with SiX Icon 10" with the next enclosure

your system is only as good as the weakest link..... but there is no point in spending $100+ on a pair of RCA's unless the rest of the system is up to the same level............. you would be fine with a mid grade RCA , just make shure thay have good quality ends and are OFC copper

these will be available for people with PTS Enclosures... your gonna see alot of work done with this logo twisted to meet the install

fiberglass acts as a mirror for sound waves

once I'm done with Marks Enclosure I'll be re doing the sub stage for the

this will be EPIC! it's a little something I drew up on the shop floor about 2 years ago.... lol

this enclosure is gonna be................................... we have room for two 12" or three 10" with this design