Omega_Ace

It was full tilt while I was searching for peak. I also fOrgot to turn ac off which I realized after I was done. I have never seen or been around car audio competitions so I'm probably oblivious to what most might think is common knowledge.

I have one run of street wires 0 guage ofc front to back and same cable for rear ground. Big three is also the same. Rear battery is a walmart marine deep cycle (don't remember size but was one of the biggest they had. Front battery is just a regular replacement battery. As far as the testing I put the meter on lower passenger side windshield and went from 50hz down in 2hz intervals and peaked at 42 then tried around that and did my peak at 43hz with driver door open. I didnt experiment with seat positions or anything like that. Never been around any comps or anything. I'll do some pics and videos. I got the kids and neighbors so I'll get them when I can. Btw thanks for the advice.

I'll seal it and try again and get proper electrical and see where I'm at. In the men tune I'll work on getting some pics.

I agree. They sound great and kill the lows. I did it just out of curiosity.

I have a 98 mustang with a trunk wall not yet sealed with two 12" ethos on a bc3500 at 1 ohm with stock 130 amp alt and two batteries. The box is a 3 cu. ft. box net tuned to 28 hz. I hit a max of 140.18 @ 43hz. with the driver door open. First time ever on a meter.

I am sure I will be more than happy with them. Quentin said they are 75% complete. They will be in my mustang with a trunk wall powered by a bc3500. Will be my biggest and best so far. I have read pretty much everything I can find on the Ethos. First was bigjons review that got me hooked then every other one is just icing on the cake. So thanks to everyone talking about these and Quentin for making it possible.

It seems I got lucky ordering when I did. If the Ethos are as good as Quentin's support on his product then I am in for one hell ofa smile!

I think I'll keep them. Thanks for the info.

I just picked up a set of ascendant audio carbon 6.5 and tweeters. They did not come with crossovers. Im switching to a kenwood ddx371 or Pioneer avh4200. Well either one have the crossovers internally to run them or could passive crossovers work and if passive is a better option than the head units listed which crossovers would be best. Thank you for you time as all I have had in the past is coaxial speakers and since ordering two 12" DSS Ethos and a bc3500 I know the rest needs upgraded. Also my mtx te404 amp running high/mid and is extremely limited on setting the crossover. Thank you

I used the program and got the box figured out for two ethos 12's and I'm goin to do an external port but do I follow the port area for a ported box ( 80 sq. in.)? Or since all the sound comes from the port do they need a larger port? I want to give it an honest shot and get the best results. Thanks anyone

I have one question. When figuring out the port do I use net our total after displacement?

2 cu. Nt. Tuned to 32hz. Port is 3.5" x 11 and 30 something inches long.

I am looking for the bandpass option. I want to try different Box options. It is in a potted box now and the lows are incredible but I have to turn lpf on my amp down to like 50hz sure to its mechanical limits.

Hey fellas, I'm looking to change box design. I want it to be port forward. The dimension I have available is 32"W x 12.5"H x 29"D. It is running on a bc2000. I am trying different boxes until I can get another xcon and have no experience with 4th order builds. It will be a 98 mustang trunk wall. If there are any details you need let me know as I have no knowledge of 4th order designs. Thank you to anybody who helps.

Thank you. If i can get two ported xcons that will save some money. If you need a little wider or height let me know and I'll see what i can trim to.

Since i already trimmed for height on the rear seat opening I could trim for width i could trim each side to accommodate 32.5"W. With that said I figured 32.5W x 12.5H x 29D with a port 5.5W x 11H x 21.75L would leave enough room to still mount the subs and tune it to 31 hz. And have 60.5 sq. In. of port area and have 3.9 cu. ft. net. Getting closer?

I could do two 12" Ethos in d1 since i already got permission and with that layaway....

Thanks by the way bassink. I just hope if i go sealed the output will be enough.

I was able to get 4.1 net cu. ft. with a port of 4.5"W x 11"H x 30"L. Port on the side. I think that was at 31hz. I'm probably wrong but i wanted to put forth some effort but my knowledge is limited.

I currently have a 12" Xcon d2 with a bc2000 wired in parellel in a 2 cu. ft. net box tuned to 32 hz. with 38.5" of port area and love the sound. It is in a 98 mustang with stock alt, stock replacement battery(under hood), 0 gauge all the way including big 3, and marine deep cycle in trunk. My 2 concerns are running amp at .5 ohm until i can get a second bc2000( not sure how long it will be until i get it) linked at a 2 ohm load. Before i link the two i will upgrade the alt. The second concern is space as i only have 31W x 12.5H x 29D max. I really want to keep ported but if it isn't optimal then it might have to be sealed. So I guess I have 2 questions. Can anyone help me by designing a box for these bad boys tuned to the same frequency or maybe one or two hz. lower with the port between the subs if possible and I will have two bc2000s linked at 2 ohms when all said and done. Second question is how do most ppl feel about running amp at half ohm until i get back up? I can just turn the gain down if I'm worried about it? This is for daily music. Thank you in advance to anyone who can help.

Thank you all.

Hey Quentin, I just got approval to layaway (2) 12's and just had a question. Will the subs be built once payment is payed in full or is it once a specific quantity is met they well be made. I'll pm you once a get a pay pal account made. Thanks for your time, Adam.

They do look good.. Makes think about a pair in the escape or put the Xcon in the escape and pair of ethos in the mustang. Either way time to start convincing the better half.

I was parked next to another worker and while i was shaking his mirrors he commented on how tight the bass sounded. Definitely has output and sq. I already want another XCON and bc2000 to link.