Duran

That't what I was thinking. I knew YOU of all people wouldn't buy a BL with your amount of power.

Would you consider a Nightshade 15"?

But I would build fiberglass pannels and it would be better for the pods to be sealed right? Not for the midbass, no.

Mine is 30 mm Ain't that a shame Duran. Jacob said he would make some a little smaller for me

A processor wouldn't do anything for you.

This one? http://www.diymobileaudio.com/forum/sales-...nderground.html

1 aught carries 325 amps, that is sufficient. Except there's no current going through the ground wire. I didn't see that it was his ground. It remains sufficient though.

1 aught carries 325 amps, that is sufficient.

[ youtube ]Imbed code[ /youtube ] With no spaces of course

Fixed

I suggest you jump off your high horse there kiddo. Stop freaking out, use your inhaler, and breathe. Pay some respect, theabunai has knowledge of BOTH woofers, his opinion is unbiased where yours is completely irrelevant. hig horse? freaking out? i think you should re-read my post buddy That suggests you have extensive knowledge. Which you obviously don't. I know your a steaming little tea kettle of furry, I can tell your frustrated, just let it go.

I suggest you jump off your high horse there kiddo. Stop freaking out, use your inhaler, and breathe. Pay some respect, theabunai has knowledge of BOTH woofers, his opinion is unbiased where yours is completely irrelevant.

Welcome

Well you should predrill all of your holes anyway. And the screws really only need to hold for the first few hours, because after that the dried glue is what holds the box together. When I USED to use screws, I always predrilled holes. ALWAYS ALWAYS. However, I've found that a Titebond3 glue joint is more than sufficient. i always pre drill my holes any way regardless of the thickness of the wood but what i was saying was that when you have to drill a hole nearly as large as the screw itself you lose alot of holding power while with a thicker piece of wood to screw into you dont have to make the hole quite as large because the wood is less likely to split. and i dont like just using glue the screws are kindof an extra security for me The glue is stronger than the wood itself

What do you mean? As in flex? i think he meant #'s Oh I see . No numbers for you yet.

What do you mean? As in flex?

Mine is 30 mm

Jacob that would be great! I have calipers I can measure the inside diameter of one? What's the dimensions of your plugs?

I got them before you started making them in house. For $285

Sensitivity is efficiency, meaning based on just that factor the BL would be louder. But it isn't the only parameter you need to be looking at.

Jake, you told me to wait for the aluminum plugs then send them in for upgrades

I'll be sending one of my Nightshades in for a recone and cooling