djjdnap

Thats alot of work going on here lol. I always tape those terminal connectors up tho. It just makes me feel unsafe how close they are

nice

Could have been my GIMP editing lol http://infiniteinnovations.thomasnet-navigator.com/category/all-categories-limousine-parts-dual-alternator

For the Crown Vic.Town Car 4.6 Now the Exp.Navi 5.4 Im a bit confused on what they did exactly. maybe someone can explain it better. says its from an 08 navi, but alot the bolts should be the same.

well that almost makes me want to seal my boxes when i take them out, i still have a ton of stain and sealer from working on new cabinets

The fobs are where companies stick you. I got a 80$ alarm came wt 2 fobs, broke 1, so i decided hey let me get another 1 and its more than the alarm now, smh.

That makes some logic. The sensing wire just reads the voltage and adjust the alt to keep it at a certain voltage basiclly if your alt is reading 15.3v and the sensing wire is reading 15v, its going to think oooh i need .3+v and crank out 15.6v, but think its only putting out 15.3v

Copper has one of the highest electrical conductivity rates amongst metals. The negligibly higher resistance from the aluminum tho just depends on the application, most people wont see the difference other than in their pocket. 1-4. - Comparative Characteristics of Copper and Aluminum CHARACTERISTICS COPPER ALUMINUM Tensile strength (lb/in2). 55,000 25,000 Tensile strength for same conductivity (lb) . 55,000 40,000 Weight for same conductivity (lb). 100 48 Cross section for same conductivity (C.M.). 100 160 Specific resistance (W/mil ft). 10.6 17 I mean why buy shoes from Payless when i got enough money to buy Jordans thank u goodnight

i didn't read anything just posting e=ir p=ei 6kw=14.4*I I=417Amps Max

^^^ IE sealed = more power Higher tuning = more power lower tuning = less power sealed and higher tuning doesn't give the sub an exhaustive workout as 20hz and below would. I could be wrong tho..Bonjour

Oooh. Sounds like a trip to sunset strip is in order. certified booty lmao

if you need help im down the street

After having my subs stolen I tend to add 2 of these. On each sub as well Except i get the 2" long ones and whip out the air tool to zip them down. A thief would be all day with a ratchet. Just my 2c

just link them from facebook

Senchez if you bring some decent clothes maybe I can get you in a club this time lol

Lmao it does say Pre Show: 1X BEAT OFF Friday Night

u know u have to post details or is that a post count tactic?

1.:take the trunk lid off. Drop it in. 2:Take the trunk lid off if it doesn't fit cut out whats stopping it and weld it back up..

man you would have to run a wire all the way to the front or rear depending on mounting. And its only got 3 post

ehh i wouldn't recone it. I look at recones as a coil problem, but thats just me

http://www.irv2.com/forums/f54/equalize-batts-with-which-charger-87298.html Lots of good info

the second part is true as well depending on your charger. A smart charger will charge until it senses that the bat is fully, if you have multiple batts it will charge until it senses 1 of the batts is fully charged. Leaving the rest of the bank and whatever level it charged to prior to the other being fully charged. If you have a bulk charger you can charge them all for as long as you want because it doesn't have any sensing technology. The problem is you risk overcharging and damaging the batts. Think of it as you have multiple buckets of water. All are attached to the same hose. You turn on the water and they all fill. Lets say all the buckets are at different levels. After one gets full you turn the water off. the other buckets are still not full, only one is.. pretty much why they say you should have the same batts, and same age.

took them about a week/12 to get back with me. After the initial request was answered the replies were pretty fast.