djjdnap

10/1- i weighed 215lbs at 12% bf i was pretty happy but didn't think i was big enough 12/10- i weigh 240lbs at 20% bf, still pretty vascular, no abs tho, but its a process. will continue to gain weigh until it warms up or i think im getting fat say 25% bf.

i=current v=voltage r=resistance higher the voltage the more amps received. I=V/R lower the voltage more amps needed I=V/R You can figure the rest out right? higher resistance , lower resistance ect ect V=I*R

http://overlandresource.com/what-is-an-amp-hour-and-how-to-calculate-battery-capacity

I'll try to make it. I quit orielly to allow me to breath on the weekend. Working 7 days a week was catching up with me. now im just a regular 7-5 worker lol, on days i wake up on time lol. gotta love flex hour jobs.

and audiophile like myself supplements my SQL need with a chandelier of tweeters hanging like a disco and 21" subz for the Dbeeez

I might be looking at a shadow, but does the newer one have less cooling? ie I cant see the coil as well on the newer version.

^^ they actually have 6. 2 are in the middle dash,

lol, i agree ^^^ and i dont like kickpanels either. You take what you will and keep what you know

I have the smaller screen, but the BT version has the bluetooth built in. I also believe it has a 3.5mm jack so you could still use it that way

sealed boxes are more forgiving than ported. So bit of more power wont hurt.

right i had to keep telling myself that wasn't a 10.

cake, cake, cake, cake, cake

I read this a while back, not sure if i posted it or not. -------------------------------------------------------------------------- Optimum Speaker Placement An often asked question by consumers on our tech support line is: "What's The Best/Optimum Speaker Placement"to achieve perfect imaging? The attached images show good speaker placement and speaker angle for both door/kick panel and A-pillar installs. Try to get as close as possibly to these speaker placements and speaker angles on your installs and imaging will always be improved/close to perfect. Stock door panels are often more than 30% muffling up clean clear path dispersion. Why buy a good clean and detailed sounding speaker if it will be muffled by a poor door panel grill design. Make sure the speakers are mounted as “far out” as possible in the door (on a wood baffle if possible) and make sure the door panel grill has design for a clear vertical and horizontal dispersion. Stock door panels are often screwing up clean clear dispersion: Do Not mount a speaker “far into” the door and then cover with the stock door panel, stock door grills always ruin good musical sound quality and musical detail and imaging. Dampening the door: Dampen the door and door panel well, this is critical and important for good bass response and overall sound quality. Check to make sure there are no air leaks around the speakers. 6.5” in the door only! Don’t mount a 6.5” mid-woofer in a small sealed enclosure/kick pod, always use the door as enclosure for 6.5” and larger drivers. Mount the mid woofer far down and far forward in the door, aim toward dome light/sunroof area if possible. Good main Tweeter placement: Always make sure the main component system Tweeter is mounted “close to the mid woofer” if possible angled toward the dome light/sunroof area. “Never” mount the main component Tweeter away from the mid woofer and or high up on the door sail panel or rear mirror location, never. Poor Tweeter placement: “Never” use the side rear mirror location as your main Tweeter placement! Always mount the main component Tweeter close to the mid woofer location, always! Proper system tuning: Don’t hesitate to send an email to CDT should you have any specific install and or system amp gain setting or overall tuning questions. Email:[email protected]

if you havent found anything call fastenall

push ups, sit ups, pull ups, lunges.. or bench, deadlift, squat pretty straightforward cardio is up to u

recones lol

i was just gonna say 2500w/14v=178a on a slow blow u would be fine.. which makes me think are their different ANL types ?

mine came yesterday, haven't takin it out of the box yet lol Probably gonna replace my US amps 4 ch since the jbl has more power.

Chuck must have been wearing shorts in this 35deg weather lol

why not open the amp and ring terminal directly to the power supply? simple ehh

what size wire are you running. Big 3? And yea your battery is horrible at 550cca. Upgrade that battery as well IMO. any battery other than an economy 1 yr warranty is at least 600cca +

and as i go back to the page it says sold out lol weird

I just ordered one 10/29

http://lmgtfy.com/?q=how+to+set+gain+on+amplifer http://www.the12volt.com/installbay/forum_posts.asp~TID~85479~PN~1 or