Kanaworm$

Tune that DP higher than 27hz.

The "Buy In" is very respectable and Sundown is very lenient on the monthly terms. Not sure how you cannot stock any product! If you run the Sundown product how can you not stock anything? All it takes is a small system to get peoples attention.

Welcome ....

Like those Blue Cones!

When talking about 7K in power you better have the electrical and budget to run that kind of power!

Have you thought about going with a larger mid driver in a 2-way set up?

I have always wanted to try this AutoTuba but have yet to take a chance on it.

Really like the looks of your woofers! Keep up the great work!

Spider assemblies tend to loosen over time. I would not worry unless there is noticable sag on the spider.

So you currently have a 10" Dcon? What amp are you using? the one in your sig? As far as your sig goes, all that power you got going and you don't have a more powerful battery? Is your alternator just that good on your truck? Sig is a little out dated! I will be adding to the electrical as time and money allow. I ran my DCON 10" D4 off my Sundown SAZ-1000D at 600 watts rms. Gain was very conservatively set and never had an issue with it. It was in a 1.33ft^3 ported enclosure tuned to 33hz. I never did run it sealed.

You should fine! Do not use any kind of bass boost on the amp. You will be amazed at the output of these woofers! I have a DCON 10" and it was very impressive in output and sound quality.

It's along the plastic speaker terminal housing that is causing the leaks. At least that is what I got from the thread. Silicone would be better since it's plastic.

The DCON is a great buy. You will want to keep the gain down as these are very efficient drivers on low power. But the added head room would be beneficial later on if you plan on adding another woofer. An option to think about is a single 4 ohm 12" to start and then add another down the road and run the pair on your amp at 2 ohm!

Very nice build! I choice in products is top notch! Keep up the great work!

Just an FYI for reference for you. Incriminator Audio: No Chrome, No Carbon Fiber, No BS! Period

One sexy woofa! Box construction looks to be top notch! Keep up the great work!

Box is leaking at the seams most likely. Take out the woofer and run some sealent along the seams and let it cure for a day or so. That should take care of the problem.

What is that? ....... The LCD Meter is next on the "To Buy List"

I have a Rockford Fosgate T2500.1BD and I have it wired like the first diagram I displayed. Is that an actual 1 ohm load? Yes!

Old news but deserves a bump. Glad to see your friend walked away with only a broken arm!

Another option for Deka http://www.carquest.com/common/downloads/partsBatteriesCQ_NGT.pdf which is a Deka rebadged under the Car Quest name.

I think BJ is not doing enclosures right now. Last I heard his full time job was taking up all his free time. Contact JBLCamry here on the fourm for details.