Kanaworm$

SSD's are so underrated! One of the best buys out there!

Just an FYI, you're not making a slot port box, your tuning is way off. Click the slot port option to off and then recalculate. It should be 19.4" long.

Here is where im confused. i used PORT Size Calculations and Formulas for WOOFER and Subwoofer BOXES to calculate the port. i put in my freq. enclosure volume. then my width/height of port to get the length. So if enclosure volume has to do with the length of the port and port displacement has to do with the volume of the enclosure.. WTF its just a loop isn't it? or am i doing something wrong No! Enclosure has nothing to do with port length. Port length is your tuning frequency. Port displacement has to be subtracted from total enclosure volume to get an accurate internal volume. You maybe thinking of port area which is port width x port height (6" x 29.224) = 175.344in^2 of port area. And the 4.79" length will give you your tuning 32hz frequency.

Try calculating with this .... Enclosure Volume Calculator (EVC) Scroll down for the port volume and put in your dimensions

My bad, yes subtract the port displacement from the internal volume! Port width x height x length = port volume.

Look under the BTL specs on the Fi website it's probably around .20ft^3!

I'm no SPL guy but it looks like a good design. You may want to put the port along the driver's side of your vehicle and then stagger your woofers diagonal to fit. Always account for all port, speaker and bracing displacement when calculating internal volume.

May want to read through these links .... Sound Solutions Audio Membership - SSA Car Audio Forum Attention NOOBS!!!! - SSA Car Audio Forum

I just right clicked on the picture and went to properties and got the web addy and put that between the . Imageshack is different than Photobucket. Nice build btw!

Just an fyi put the link between that way you will not get the link.

The one's that fit your budget the best! Both are going to be great drivers. Just pick and go with it!

Pics? I see no stinking pics!

Please explain?

Only good thing about that install was the JL Audio amplifier.

Yea they are one of the better more mainstream companies out there for the money!

I didn't know you ran BOSS Duran?

Post up some pics of said system or a build log!

Memphis has always made a great amp. Stick with an authorized dealer when buying as it will have a warranty.

Nice install with the transistion! Box looks great! Vid is funny with the "I couldn't swallow"!

No harm other than maybe you may get some mechanical noise just here say. Have been alot of inverted installations done this way.

Who? .....

Build a false floor for it to load against instead of the carpet floor.