JCBULLET

..try photobucket

:/

^^agreed

There is no way you only have one red top battery and big 3 for 2400 watt amp and your voltage stays at 14.3volts. Measure your voltage when system is playing to see how well your voltage is maintaining, if it dips bad then you need more electrical. I still to this day dont understand why people dont install volt meters when installing a system over a 1000 watts, just baffles me. ^^agreed

It may be your box like others have stated and/or bad electrical.

"Brutus" amps can be ran @ .5 daily/.25 burps & are great amps for the price. You should have no issues with 1.7

Any free t-shirt love for someone who buys recones and continues to run ssa?

Nice!

nice

Yup, but will not last long without decent electrical..

^^ easily

low power / bigger enclosure, high power / smaller enclosure and you my friend will have a decent amount of power on tap for that copper 15..

My opinion ..no

it would be active... place the components to the front im assuming? ..Curious, were you planning on running the components up front or front & back?

^^ agreed, but 5.29 net is still to big..

^^ agreed

Yellow top might work, but you will know when everything is installed. Also invest in a voltage meter and keep an eye on your voltage. Now for numbers I can only give you a few examples: I ran a hdc3 15 couple months ago off my m3b @ .5 hitting a 146.2 in my Grandprix and good friend of mine is currently running two hdc3 10's of a Dc 5k hitting a 152.5 in his blazer:) Just a friendly heads up.. that box is going to be way too big with that much power

Start by at least putting an Xs3400 or equivalent up front & what size hdc3 will you be using

Don't know about the four channel, but I am currently running the Q-200 and it's anextremely nice amplifier. You could run four components of a Q-200 wired down to 2 ohms stereo and probably have better results/performance than the 4 channel. Just my opinion though..

#8641 make the list?Your's is at the top of the list of next to be shipped out.What about Order #8675 A lot of Zcon's are in the works now, yours is in that batch. #8641 make the list?Your's is at the top of the list of next to be shipped out.What about Order #8675 A lot of Zcon's are in the works now, yours is in that batch. ..update on order #9305?

Now this is cool! I remember meeting Alma when I was a little younger:)

I'm very tempted to get a few of these & see what they can do:)

Nice! ..If you ever need Xcon's get at me.

3 business days. Sweet!! long wait times for recones from any company is ridiculous. I may have to pick up a pair of 12's and see what they can do:) thanx Quentin