iputon326

get a dual 1 ohm sub

yep if you can just try finding a way to fit it so you end up with around 4 cubes. also like it was said before make sure you take displacement into account. Yes, but we don't want people to feel they have to, the 3.25 cubes is plenty. well no matter what he builds he's definitely be happy with the xcon. great sub

some of the ones i would look into: Sundown saz-3500d. rockrord fosgate 2500bd(new model) soundstream xxx4000d you guys are jumping the gun here... OP we need more info!! read the noob posting guidelines. before you spend all your cash on an amp and realize you forgot to budget for the electrical... he asked what amp to get and we answered. i dont believe thats jumping the gun.

that box volume is wayy to small for that sub. it deff wont sound that good. It says they need 3-5 cubic feet. Hows that to small? that box is fine. nothing to worry about. mines a little over 4 cubes.

id go with sundown. sundown amps are way underrated. they also have a 2000d model if you cant buy the 3500d.

yep if you can just try finding a way to fit it so you end up with around 4 cubes. also like it was said before make sure you take displacement into account.

the enclosure recommendation is 4 cubes. i really wouldnt go any lower then that. are you building a sealed or ported?

id go with either the LI or FI. ive heard an ssd and i liked it but ive heard only good things about the LI.

at the ssa store. its 250. if you didnt understand my post earlier about the dual coils go to the12volt.com and on there go to subwoofer wiring and it shows you how to wire the coils.

the nightshade. bl's cant handle that much power. edit- i just realized your getting 2 subs. id still go with the nightshades.

by dual it means it has dual coils. it has two sets of coils you wire to the amp. if its a dual 1 ohm sub it can be wired to .5 ohms and 2 ohms. in this case you would go with the kicker amp. if its dual 2 ohm it can be wired to 1 ohm or 4 ohms. you would go with the amps we mentioned for this.

if your going to get that amp you need a dual 1 ohm sub. its 2 ohm stable so it puts out 1500 watts at 2 ohms.

most sub amps are mono. so thats what you want. class d amps are the best to use. a/b class are poop amps lol. so you want a mono class d amp.

yep like he said get dual 2. i say go with sundown. they're definitely worth the money.

You are missing the point then. haha u tell him denim

or if you already have the sub you need to get an amp that puts out some power at 2 ohms. you could only wire that hifonics to 2 ohms. you'd probably only be gettin 600 watts to the bl.

if your going to use that hifonics amp you need to change your order on your bl to dual 2 ohm.

yea thats what i wana see and some lanyards

well thats just between the wheel wells and thats where my box sits. back behind the wheel wells its probably close to 50 or 55. i haven't measured it before so now im kinda curious lol.

everyone has their own opinion on the subject. a lot of people on here dont like it because its not actually true.

What were the pros and cons of each if any. well to me the xcon seemed louder. the bl is pretty close though. the xcon does wayy better on the lows. ive never had low notes get to my ears before i heard the xcon. the bl is more an spl sub. it does way better on the high notes and it still does pretty good on the lows.

ive heard both the bl and xcon. the xcon is soooo much different from the bl. i like how the bl sounds but i loved how the xcon sounded

i hear that all the time lol um, I SAY that all the time. I wouldn't want to be hearing it. baha i bet he wishes he said that first.

Nice thats what i like to hear, yes i would like the plans for your box if you dont mind. and the car its going in is a 2000 Chevy Malibu not a huge trunk but i hope its big enough for 1 15" Thanks alot buddy first thing u should is measure and get the dimensions from your trunk. that way we can see how many cubes your working with. the bl doesn't require that big of a box so if you build the box right its gona fit in your trunk. you can go to re audio and on there they have a box calculator so you can build your own box. just measure first then we can help you with the rest. also tell us what you want your box tuned to. im not to sure what i want my box tuned to i never built a box up to these specs..... iv only made small boxes with 3" circle ports i took off another box..... so any advice you can give me would be great. Thanks well i have my boxed tuned to 32 hz. ive had two boxes. the first was tuned to 34 hz. the second one is tuned to 32 hz. i like the second box waaay better. it gets low and still hits the highs. the lower u tune the box the better it picks up the lows. ya well i tuned my box to 30 Hz cuz the standing wave in my car wave 29 at a 1/4 wave so it plays the loudest possible in my car...but il give you the dimensions and if the fit in your trunk then your golden but if not then you will have to calc another one..Ext. Dimensions-(W 38.5")(H 17")(D 17.5")..and that is with a port 3 1/4"x15 1/2"..with 3/4 mdf the interior volume of the box is 4cuft taking the port area and sub displacement into account..if those dimensions fit i'l tell you the port length and all the good stuff Hope it works out man u got a wide ass trunk lol. i got just about 37" between the wheel wells in my jimmy.