Sencheezy

ok, last update for the night, I've been at this for 15hours today, and I'm beat, will conitnue tommorrow. Not really much of a progress since going to get food, I cut my daily port to length, will pain the outside tommorrow, but I layed gorilla ducktape in the inside walls, to help with the flow of the air. Maybe it will increase .002 dbs?

I believe these were the best value by far, sears and Lowes was about 24$ for 24", where these 20" were only 4.xx$ a piece! I will use them in the morning, I'm tired as balls right now to began putting the panels together, plus I need another set of hands. Thanks choo! Yea, progress is always good Stop slacking!! lol

Small update, I have finished my bracing dowels finally! Omg, that took forever, I got to go and get more screws now tho, and food, I'm starvin like marvin right now! Curse fast matabalizm Bracing Plates pre-cuts Don't mind the mess ups above^^ My excellent carpentre at its best Here they are stacked up, I smooved the edges, will it make it louder? I doubt it, but it looks nice lol And heres the final product And thats where I stand ATM, once I get back, I suppose I'm going to try and place some panels together, *nervous* Wish me luck!!

Thanks tim! It is fun, I'm actually enjoying this lol, but, dreading on cutting the panels is the pain I feel! Wow, and lets not start to talk about straight lines or sanding!! FML!!! I can't wait either, I hope I make some noise

I am feeling very good about this box build so far! The Zcon showed up in great condition, thank you very much Edoub. I am taking a small break right now as I've been working at this since I woke up (12ish). I'm making great progess, and I usually don't stop till I'm finish. Also, with the help of a friend, we have taken out the third row seating, and the stock subwoofer. After this update, I'm going to go back and finish up So for now, enjoy some pics! Gutted out third row Stock woofer location Stock Woofer My friend Dj installing the legs to keep the false floor level. Draw out of 4x4 displacement plate Another Third Row Zcon Shipping Zcon 8 Cut Outs, Double Baffle, Flush Clamps, Dowels, 10" Concrete Foam Tube New Tube vs Old 10" vs 8" And after 10hrs of updating with the board update Thats all I have atm, will now go back to work!! Also, for the dowels, I'm doing 2 Vertical, 2 Horizontal, and 2 Depth. I hope this works! Can't say enough thanks to Stefan, great guy

Thanks nem! My goal would to be louder than last MECA, which was a flat 140, the first place winner was 141.4, so I am also looking to beat that. I am not using a single dowel, instead, I will be using 6 with a 4"x4" plate to displace more bracing. this is who i was going to refer you too...sorry for the delay Its all good, thanks anyways, I know your a busy man. Time for an update!!

To answer your question, the lows are beneath the highs. If you know your not giving a lot of details, why post? Seriously, You need to provide a little bit more to help you. 1. How big is your current enclosure? 2. What is your current enclosure tuned to? 3. What vehicle is this in? If sedan, is it in trunk, is it sealed off? Also, you do know that you can't really "hear" the lows right? The "lows" only creates sound waves that will "flex" panels in your vehicle for lesser terms of ways to describe it. If you would like more of the lower end, then yes, I would suggest you tuner lower.

*Specs provided by StefanHinote

Another box build coming soon. I am going to attempt another box build, depending on the results, I may decide to build another box in the future exterior dimensions: 46" width x 17" height x 19" depth 6.985ft^3 displacement from second baffle (46"x17"x0.75"=586.5in^3 divide by 1728 = 0.3394ft^3) 0.3394ft^3 zcon displacement: 0.22ft^3 one 1" dowel vertical (15.5" height X pi*r^2, 15.5"*3.14*1^2 = 48.6946in^3 / 1728 = 0.0281ft^3): 0.0281ft^3 one 1" dowel horizontal (44.5" width * pi = 139.8in^ / 1728 = 0.08ft^3): 0.08ft^3 net volume ~6.31ft^3 Using one exterior mounted 10" sonotube / concrete form tube: Daily Port Tuning: 34hz Port Length: 21.7in Port Area: 78.54in^2 Vent Mach: 16.237 m/sec Comp Port Tuning: 45hz Port Length: 9.25in Port Area: 78.54in^2 Vent Mach: 12.268 m/sec

Go to hear chicken, got any pictures or vids to share?

Im assuming the ICONs ? Well the ICON is an amazing sq driver. Yes, but again, I would recommend any of them vs the ones you mentioned. If you can wait, sure, you can pick up the Gcon as it will be release shortly. OR, you could grab the icon, which would leave room to grow. Whats your opinion on the Skars My opinion on the skars is that it may be a step in the wrong direction, your first few option are a better choice.

http://www.mh-audio.nl/spk_calc.asp - All sorts of calculators

Oh wow, good question. I also wondered the same thing with another woofer. If you go to sundown's site, and look at the neo pro series. the 10" has a higher power handling vs the lower sized models. It would be great if someone could shed some light on the matter.

Damn yo, that looks good!! Did you have to jack the car up to run those so neatly? Got any pics of the entry/exit hole? Would like to see how you went about that.

Im assuming the ICONs ? Well the ICON is an amazing sq driver. Yes, but again, I would recommend any of them vs the ones you mentioned. If you can wait, sure, you can pick up the Gcon as it will be release shortly. OR, you could grab the icon, which would leave room to grow.

Looking good, thats not picture heavy need more!

I would avoid both and recommend an SSA driver, call me crazy.

LOL!! Its funny because I saw her unbutton her pants and push up her boobies al in front of her baby and baby daddy I guess sex sells?

good to hear

Lol, one year, you should give all those ppl gifts instead, and see their faces

sounds like a lot of work lol. Don't release any photos of that recone, that subwoofer is top flight security you know. Get let other people see the masterpiece's guts

Or early June. Everybody loves late July / August for vacations. Personally I don't June may swing. Thanks. Grills, a-pillars, and trim piece for the doors! Stefan, i said happy bday to you on bookface but you didn't acknowledge me If it makes you feel any better, I didn't acknowledge any of my family members either, didn't acknowledge anyone directly. However, I did say: "Thank you everyone." ah, I didn't see that No problem, hope you enjoyed

Or early June. Everybody loves late July / August for vacations. Personally I don't June may swing. Thanks. Grills, a-pillars, and trim piece for the doors! Stefan, i said happy bday to you on bookface but you didn't acknowledge me