JimJ

If you say you're definitely not an SQ fan, I wouldn't recommend IB. While it'll sound better and it'd be what I'd do personally, you'll give up a lot of output to get that.

Where are you getting those numbers from?

The amp would be fine, they're not covered under warranty to a half ohm anymore. So if that bothers you, don't do it, but as long as you aren't stupid with it there won't be a technical issue.

If I were in your position, I'd run the amp at a half ohm and make sure you can't send too much power to the subs. Won't cost you any more

Honestly, it'd be pretty hard to go wrong with any of that list. Take out the rears and that helps your budget for the Audison a bit

What you really mean is a mixture of SQ and SPL, what I said in that post wasn't directed at you so much but just a general thing. "SQL" is a bad, bad, bad term. Have you looked into 15's that take a smaller enclosure? Maybe if you tuned the RL-S's high enough you could fit them, but then you'd be sacrificing low end and transient response. BTW, what's soca? I'm assuming it's kind of in the vein of the other genres you mentioned, but I've never heard of it before so I don't know.

Depends on the budget, mounting locations and crossover points... That's still a decent amount of power at 8 ohms, so you have a lot of choices.

What frequency and at what slope do you have it crossed over at?

Can we get the filter removed please? If you can't fit large enclosures...I wouldn't recommend the RL-S...

Some of the best sounding cars I've been in have stereos worth more than the vehicle

Well. Folks have moved on to other stuff, by folks I mean the people who used to run it. It is not what it was 2 years ago, and that makes me sad. I just go there for the photo gallery, because it's still a better setup than what's here. If SSA got a photo gallery that duplicated what that one does...I probably wouldn't check it anymore

Reasonable if there's a lot of labor extensive work and the craftsmanship is flawless...

, I give you the gift of "comma".

I'd take four 10's, my ceilings aren't tall enough for me to do what I'd want to do

Revisit that in about 50 years

You'd love it here then. You can go from seeing sun, rain, snow, ice, sun and snow again all in one day.

And a totally non-sustainable future...

I swear I didn't see the two pairs of components coming...

Those are surface mounted devices. They're a PITA to do any work on yourself...requires a magnifying glass, carefully controlled soldering temp and a lot of patience...

Now I just need a way to make ColumnsUI look pretty Some amazing skins out there.

Those are Webster's...Ramos was doing his Jedi router tricks... But they might as well be L3s

Midwest blah. Time for you guys to come East

So you're going to have a 3-way substage? You'd get a lot smoother response if you just went with one.

*shudders* You only need one size of sub for the subbass. Mixing them is a horrible, horrible, horrible idea. A sealed Q or two would have been a better choice...

I think you ordered the wrong driver in the Fi lineup...