johnecon2001
SSA Regular
-
Joined
-
Last visited
Everything posted by johnecon2001
-
Way too big for a sealed box. Drop a 6" round port into it at 14.10" long. Tunes you to 33hz. -
Its the same amp...
-
Speakers and amps under a truck? lol.
-
Looks like you've got some large openings in the door shell, you should try and stick some deadener on your outside door skin as well. and then seal up those holes.
-
http://www.soundsolutionsaudio.com/forum/i...?showtopic=7158
-
You're comparing apples to oranges. And you can't just say "compare this!". Doesn't work that way.
-
I'll be there.
-
Jesus, some of you people have the reading comprehension of a 6 year old.
-
You can use thread rod for bracing. It'll take up the least amount of internal volume.
-
That looks impressively loud.
-
For a final two ohm load, you can wire them like that ^. Or you can wire each sub to its own terminal. It'll end up at the same ohm load.
-
I believe dB-r is the authorized repair house for Incriminator.
-
No one can properly answer these types of questions due to all the variables involved. If anyone says they can, be assured they're just guessing/speculating.
-
Clean install. Looks great.
-
That may be fine and dandy for some sites, but here, you will be literate.
-
SSD's come in DVC 1 and DVC 2. There is not 4 ohm option.
-
Hard to tell. Especially without direct links.. perhaps try editing them in.
-
Well, you didn't specify.. So I put something together that most people would like. The 12" would be a viable option like Adrian recommended too.
-
You're tuning a bit high for where the Q is supposed to thrive at.
-
15" SSA ICON Sundown SAE-1200D OR if you can find a used SAZ-1500D. That puts you around $650. Now just skim through Pioneer's site to get an idea of a Head Unit you like and add that. And you're set.
-
Not the outside of the boat, you tard.
-
You didn't turn off the amp before you hooked the speaker up? Bad idea.
-
You can use 14-12awg speaker wire. The remote line is fine at 18awg. But use whatever you can get cheaply.
-
Post up some pictures of your boat. Perhaps we can offer a new mounting location. Most people cut holes on the inside of the boat to mount the sub and then build a box behind it using the boat itself as part of the box.
-