mrray13

the SSA ICON 12 would work great as well. only needs 2ft^3 ported and will eat up the 1200wrms and give you great sound and plenty of output in return. the Soundsplinter Rl-p is another great choice. though 1200wrms is on the high side for it, but with proper gain setting, should work great. the mach5 IXL or spl 12. while i've not heard either driver, if either driver performs the way the maw12 did, they would be a great choice. and as mentioned, either a pair of BMs, or a single Mag, would be a great choice. the pair of BMs might even be a better road simply due to cone area, efficiency and mounting depth. and you can't go wrong with the Q. another fine option. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

please don't misunderstand me, i'm not trying to dog the xD. but i don't want someone givng the wrong impression to a firearm no0b either. i don't care if the pistol has 20 safeties, it doesn't replace training and common sense. and accidents happen, safety on or off. if people shot themselves pulling their firearm, it was user error and poor training. not firearm design. one can grab an xD and shoot themselves in the foot with poor technique and training. i'm not military, lol. i am diligent in firearms and training to use them. i'm currently enrolled is a school that teaches what amounts to mixed martial arts, lol. there are roughly seven different styles we learn, including training for mma fighting. i'm also hoping for my first fight around september, though it might get put back. we shall see. and i'm not trying to degrade your opinion. i just don't want your opinion to be mistaken as fact. hope you understand. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

ESP or perhaps, common sense which comes from being a Physicist. I am not sure I want to play against Mark. We can set up poker tournaments on here once I figure out how to install games in the arcade. Been having some trouble with it. I'll figure it out though. Also, any interest in installing a casino here as well? You could play for SSA POINTS, lol that would be the pimp shit right there!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

funny, i carry my glock in condition 1 all the time, never an issue. you'd have to drop it and something hit the trigger jsut right. seems as though the trigger safety in teh xD, sigma, m&p and walthers all were copied from someone....oh yeah!! glock. who, btw, has it right. and another note, ANY safety can malfunction. so jsut because one has a sidearm with multipule safeties doesn't make it any better then a sidearm with just one. also, what if you don't grab your xD correctly? you pull the trigger and no bang. and it is an issue with any grip safety ever invented. why do you think every 1911 on the planet, save mil spec versions, all have bumped grip safeties? the moment one assumes all is well because the safety is on, is the moment when it can all go wrong. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

shit, i don't know. i did grapple a bit with sanders last night and he's a crafty lil bastage, lol. i didn't fall for it and ended up making him tap with a "kimora" style choke that he taught us last night, lol. it was fun and he is good! 1: Start out going SOUTH on N JACKSON ST toward OAKCREST ST. 0.8 mi Map 2: Turn RIGHT onto BELVIDERE ST/IL-120. Continue to follow IL-120 W. 2.5 mi Map Avoid 3: Merge onto US-41 S toward CHICAGO. 19.9 mi Map Avoid 4: US-41 S becomes I-94 E. 29.0 mi Map Avoid 5: Merge onto I-57 S via EXIT 63 toward MEMPHIS. 267.1 mi Map Avoid 6: Take I-64 E toward LOUISVILLE. 21.5 mi Map Avoid 7: Take the IL-242 exit, EXIT 100, toward WAYNE CITY/MC LEANSBORO. 0.4 mi Map Avoid 8: Turn RIGHT onto IL-242 S. 12.1 mi Map Avoid 9: Turn LEFT onto JERRY SLOAN AVE. 0.1 mi Map Avoid 10: End at Mcleansboro, IL Map Estimated Time: 6.0 hours 1 minute Estimated Distance: 353.39 miles and there you have it, lol. it's little more then an hour from me, so that wouldn't be fair, lol. when you have a free wweekend? wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

not only capacity us a crutch. several forces went to lasers for awhile, under the barrel type, and at first accuracy went up. but what happens if the laser doesn't work or you forget to turn it on? they found out the cops couldn't shoot using iron sights after getting used to the laser. bye bye laser. which is why none of my home defense guns carry any kind of electronic sight. a good set of night sights and that is all that is needed. i want an ar as well, but i want a piston driven version. the normal gas impingment version just doesn't float me interest. i'm not a stickler for cleaning, lol. teh 204 ruger has gotten my attention, as well as the 6.8 grendel and .50 beowulf. the 6.8spc is getting some serious looks as well. but who knows? i love the way the .223 shoots. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

old school mini would be pimp. but i seriously think all the good ones have been named. i want to try a pinto wagon, but finding one is a bitch. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

well, shit. i want to post, but have nothing to say. guess i'll go to bed. 5am gets here early, especialyl on monday mornings. good news is that it will be a short week. matt, gl with that shit there, lol. pictures will be required if catfighting commences, adn we'll want some nudity. so, if need be, feel free to jump in and help them remove excess clothing. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i wouldn't be worried about the safety side of things, they are built solid as all hell. as for not enough room, well, can't really argue, although the clubman does have quite a bit for a small car. but i thought what the hell, lol. i'd throw it out there. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

mini cooper clubman s seriously, i think, lol. room, performance, handling, gas mileage and fairly inexpensive. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

of the compacts, the only one, IMO, that is truely a compact is the m&p. and the only reason i say that is that is has a lower then normal slide height. the taurus and the xD are hugely tall in the slide department and as thus, takes them away from being a compact. simply shorting the barrel and grip, IMO again, simply does not make it compact. STI is a great choice. nighthawk is one i'm looking at quite hard, though budget says they might be a bit high. if you're looking at taurus, look at s&w for there 1911s as well. one can get quite a bit for the money with a smith. i want a .357sig, but honestly don't know what for, lol. i guess that would be on my short list, possibly in a glock frame, maybe in a sig frame. another 1911 will find it's way into my home, though it won't be a kimber. teh s&w is real high, as is springfield, on that list. no budget, would definitely be looking at nighthawk, reeder or any other of the custom shops. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

excellent post. have you considered the ruger sr9?(don't remeber if it's on your short list) i have yet to see one locally, though it's been grabbing a shit ton of great reviews. 17+1 in a package that isn't any wider then a single stack 1911. they seem to have hit a home run with this one. plus even i like the looks, unlike previous ruger polymers. i can't wait to get ahold of one, check out the erogonomics. if it's has good as the reviews say, and it fits the wife's hand, there will be a 9mm in the family. otherwise, you've really hit the nail on the head. penguin, 10mm pistols are hardly seen for a couple of reasons. cost of ammo, low production and people who own them are hoarding them. that drives up the value. you'll be hard pressed to find one for sale anywhere but the internet. are they worth the money? IMHO, no. again, they are nothing more then a slightly longer, slightly faster, but quite a bit more expensive .40s&w. one can simply load their .40 a little hot (there is on average a 100-150fps difference between the 10mm and .40s&w round, same bullet/weight) and you will effectively have a 10mm round. of course, you could opt for the .357 sig as well. a necked down .40s&w case, only slightly smaller projectile and 10mm speed. again, cost is higher, and you are right back to similiar performance of the 9mm. and the circle continues, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

http://www.smith-wesson.com/webapp/wcs/sto...amp;isFirearm=Y sorry, it's a 2.75 inch version, lol. one can grab teh 460 in the same size as well. http://www.ableammo.com/catalog/product_in...oducts_id=83208 http://www.ableammo.com/catalog/product_in...oducts_id=82996 two 10mm pistols that can be bought. s&w had the 1076, should be easy enough to find. ammo will be stupid hihg though. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I do believe you mean a .50AE, they don't make a handgun in .50BMG. No I meant the .50 BMG rifle round...I'm sure you could make a concealed carry carbine foldable stock .50 BMG gun I'd love to see someone make a snub nosed .500 S&W magnum even more umm, s&w makes a 3" version. can't get much more snubbie then that, and it was available almost from day one. the first 500 bought in the area was a snub. and it'll eat 1" plexiglass for dinner, lol. 10mm=.40s&w+p basiclly. and they aren't that rare. pricey, yes. rare, no. colt is even bringing their delta back, though i wouldn't want to pay for it. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

sorry, we'll defintiely have to disagree. tauras, s&w and springfield all make a very comperable 1911 at or less then a similiar kimber. and no less shootable, accurate or anything. kimber is a fine gun, but IMo, far better companies out there. the entry level guns from the other manufacturers are better, at a smaller price tag. you have to step up to kimber's higher line to find one worth having. and yes, this comes from experience. and let's not get into their customer service. did you know your one year kimber warranty starts the date the dealer gets the weapon? not the date you purchase it. yeah. and that's straight from a CS represenative of kimber's when my custom II started to rust for no reason. and then, they were going to "discount" the refinishing to only $250 plus shipping both ways. on a firearm that was pampered, wiped down with a micro fiber cloth and a light coat rem oil everythime it was touched. i've got to stop, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol, nope. that's a pretty good price, and right along about what i would charge. one can figure $225 or so shipped in the lower 48, depending upon carrier/insurance. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

but if it's not there how will the flux/nio3 capacitor get cooling? i like how he wanted people to ask about nio3, but then skirts the explaination when finally asked. as long as they will go boom, people will buy them. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

freeze dried icecream? wtf is that? no melting? let us know if this is any good. i might just order some meself. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

did we ever get pics of those BIBs? i really need to start on my h/t. be something different from all the same car audio crap. sup ryan1? i see you! i want to go shooting today, but ammo is low, my FOID card expired and i haven't recieved my new one yet. that means i can't buy more! goshdamnit motherfucker!!!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

something along the lines of a nemesis, or 750wrms, MAX! yeah, they are underrated a tad, can typically handle 350-400, if one is easy on the gain and volume knobs, and knows when to turn it back down. otherwise, grab a pr500d or mc500d and enjoy. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

if anything, I'll want the pan painted Chevy Engine Orange notched and chevy orange? gotcha!! now get me the damn pan, lol!! MIG is easier, TIG looks better, and if i notch it accurate enough, TIG can be stronger. i'd have to brush up on my TIG though, and that's not hard to do. sure you can't get a pan out to me sooner? would give me six weeks to get it right, lol. but for real, just send it when you're ready, and don't forget to include how big of a notch, color and stuff. cause i sure as hell will forget, lol. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

cool, name a weekend! talk about a gettogether, lol. our schools grand master's are from mcleansboro, maybe we can get together there as GM sanders competes quite regularly in mma. good luck at the tourny! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

lol, no...we saved all the piss up for this pissing match. mr.cabinetry, please don't take this personally. i enjoy a good arguement every now and then. we just kinda walked into this one, lol wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

don't think that would happen even if ben offered up HUGE money. really HUGE money. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

i bet it's just like the older subs, comex over poly cone. and the neo/ceramic hybrid? lol, it's ben. wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee