Julian

That won't help significantly, I'd do both to be honest.. Especially at half an ohm. I wish you luck, that WILL void your warranty.

Clipping... to the simplest way is an Un-perfect Sinewave when clipping occurs the peaks of the wave become squared.

Running any amp at 1/2 an ohm you will need a much larger battery bank.. for sure.

The clipping light is... ok at best.

That's pusing it... a lot You're giving us no information either.. Do you have the big 3, aftermarket batter, HO alt? THese are all things we need to know..

That's a little more tempting, if i can find one for that price. that's more like it.

That looks like a DP not a warden, how old is the DP?

Is that a M16 on your back? haah

I try

I agree with scott it's an old Q

No the cooling option are machined channels in the motor, by default the bl has a plugged polevent

The bl does hot have a pole vent, it's either a ssd or q

If you look really close in the vent gaps where the Spokes are coming from you should see on the former written in sharpie ssd or q then the impedance of the coil, get a small flash light and inspect it all around

Agreed BL would of been a MUCH better choice. Anyways Larger box = more output with lower power but you're more prone to mechanical failure.

he didn't want to work everyday and was pursuing world travel. dam, not a bad deal. should be interesting to watch SS under new ownership.. Hopefully better than ant.

Top Sloppy joes at 3:00 = <3

he didn't want to work everyday and was pursuing world travel.

TOP

Multiple woofers = More motor force, more area to dissipate heat, (sometimes) more cone area. Cone area rules all, i've heard 6 12's that was loud as balls... but only on 1.5 KW RMS. for the multiple woofers will you have ENOUGH space for the port needed for four 12's. These are all things you need to take into account, also you need to factor in woofer displacement also. 567.05747397296 In^2 for 2 18's 678.58401317538 In^2 for 6 12's

I just read that, however he's from Brazil, so his English is not the best i assume he's using a translator.

Well my goals for the system are the best possible sound out of my factory system without going overboard, I'd like to also have something that would have a Subwoofer out. Right now I believe i'll be running the Bravox CF 6.5's Sealed, In either pods or kick panels, but i don't know how i would get the imaging correct so that is something i'll have to worry about. I know I'm going to have to need considerable help tuning this because I'm not well initiated with tuning front stages to their optimal level. I know i want something that is loud, has good frequency response and well.. that jut doesn't sound like shit. although this is all user preference this is what i'm pretty much looking for. And yes i'll be needing to condition the factory signal and use something a lot better than a LOC. To start I should probably name what I'm going with in the entire setup, For the Front stage amp i'm pretty set on a Sax- 125.2 Running at 4 ohms, with 3 Icon 10's tuned to around 33 Hz on either a Saz-3500 or Saz-4500. (Of course i'll have a sufficient electrical for all of this) If you need any other information let me know.

I was thinking a much larger box, maybe 20-25Hz wont sound great on music, but will kill on movies.

it seems like you would want the BL if you're going with Fi. The icon with the Alum coil would be a greatoption.

I second third, etc. I would ditch the rears and look into the Bravox group buy, you can get great prices on some speakers. I would also suggest the boss amp, it's Zed built and high quality, and if you're looking for more X-over abilities i would also suggest a Sax 125.2. In all honesty you do not need a rear fill, In my old lumina i had one set of component speakers upfront and that was IT everyone in my car could hear my mids and highs even while in the rear.

Brad you're great, That's exactly the response I needed. I was looking at the JBL but I'm knew to all the Tuning and such with. 2-3 way isn't 100% needed as of yet, I'm looking for an alternative to buying a headunit (500~) and my dashkit which is 300+. I'm looking for something to go from high level inputs to low level inputs, for my Fronts + Subwoofer, I have used LOC's in the past and they are HORRID at best.