Julian

define "low notes". When playing BELOW tuning frequency there can be an impedance drop. dropping your final load to a lower load making it clip/go into protect.

You should never, never, what so ever count on imp rise on a daily system. Music is a whole different ball game when it comes to single tone burps. Playing below tuning can easily drop the impedence down. ( and trust me it's possible with s&c music or music that gets low)

You need to hook a fellow Missourian up with some of those blues comps

very nice, i would love to hear the IB3 setup.

he will need 2/0 or larger because he'll be running two 3500's do 2/0 to battery bank then 1/0 to the amplifiers. Basically what I meant, just use 1/0 to the amplifiers but thanks for the elaboration. No problemo Most 1/0 handles around ~300 amps, so two external fuses of 300 amps = 2/0 + whatever other amps you have.

Mods please move to the correct section. Contact DC, my 260 XP alt ran at 14.9v after 45-1hr of running hot. Mine does around 130 amps at idle.

he will need 2/0 or larger because he'll be running two 3500's do 2/0 to battery bank then 1/0 to the amplifiers.

i agree 10 is just fine, you don't need 8gauge wire for that power unless it was an extremely long run.

i'd rather buy a Sony XPLOD than a Pre-fab box.

hah i would agree

Alexa Internet Page Worth Vistors All really cool stuff about our lovely site

we need more information.. electrical upgrades, vehicle, etc.

LOLZ

They're very backed up, it may be a little bit due to getting some items through customs.

Stealth, I hope your home is enveloped by a volcano, you have proven time, and time again that your insight is generally false. Instead of flaming someone you need to be able to express why you think something over someone else belief.

Making that recommendation doesn't tell him the exact minimum amount of port area needed to avoid port noise. so you are telling me that he will have port noise with 15-17 per and it will be audible???? are you a dumbass, or just a dumbass. my recommendation is not telling him the minimum amount or port area needed without port noise, its giving him a proper starting point for a daily system with lots of output. ^^^^^^^^^^^^^^^^^^^^^^^^^

yeah it's dubstep theres a lot of artists, its along the line of Drum N' bass, jungle, etc

you must double your power for a 3db increase.

i just loled for a good fifteen mins thanks chop

it may not blow your amp soon but it can.. running at any ohm LOWER than 1 ohm is uncovered by the warranty, you can.. but do you really want to squeeze that tiny bit out of it? you wouldn't even be able to hear the difference.

x10 x194234848238423-48230948324329482309423489-482394080329283432490309830948230948329040932840932840328942309843293280432894238094832483209423098420394320940932409203948029384 I love my sundown, i would always try RF though

sig worthy

that's what they advised on the news around here, shift in neutral, kill the ignition, then break.

for duel alts i think you do need a regulator.

Lets see, The BL's Cannot be sealed, the Q's can. Generally the Q's will go lower than the Bl's. The BL's have a ton of output but aren't by any means a SQ Driver (However they do sound good) also the BL's can handle much more power.