REVpuggie

be sure to post pics

that indeed is a very efficient way to brace without taking up space !!

oh lawd ..... somebody shoot me !

two BL's , 12 inch or larger should be capable of doing 150's ...I think you should think about where your troubles are . amping ,wiring , setup will be a large part of why your not doing them 150's ,post that and it will give way more insight you can always put heavier stuff in your trunk but its up to you to make it work right ....if your not doing that it will be pointless to invest in equipment

King is really the place to start . I've found that AJhorn is an acurate calculator , full version costs about 120 usd , really user friendly , infact its almost as easy to use as winISD. http://www.aj-systems.de/

anyone make a SSA clan yet ? help me get to level 11 > http://revpuggie.mybrute.com

I just not on msn that often ..... didnt block you or anything ...

no prob , to start with an spl vehicle you should obtain some basic info , start with the advanced discussion and technical how to's right at this forum , it will give you a reference on how to start .

IT'S ALL IN THE BOX !

I posted my link on 2 other audio forums , and a brand related tuning forum good for you too sensei !

Im a level 9 now too !!!! http://revpuggie.mybrute.com I DARE YOU !!

I metered my system on "I put on" , My wiring is limited to 80 amps so I can't push more than 950 watts an AA chaos 15 inch in a backloadedhorn on a Celestra DA4k did 145,9 db on the termlab time to up my electrical !

it would be cool to have a SSA clan ! I joined to : http://revpuggie.mybrute.com bring THE PAIN !

I've made flared ports this way out of 125mm (5inch) PVC with 5cm(2 inch) flares, and must say they work very well !

the reason why is quite simpel , you prob understand the difference between 4th an 6th order banpass enclosure . so now think of a front loaded horn as a 4th order bandpass , the small back enclosure gives a high upper tuning ,by porting the box you can narrow the band by tuning lower ,giving more gain in a small band as a result .... maybe a double horn would be nice , I cant calculute that in a program but maybe it can be done by hand , making the backwave travel twice as far as the frontwave and giving both the equal amount of hornmouth area

A lot of this stuff is fairly unknown in europe , so I downed some of the songs Damn !! really liking te "I put on"

I'd definatly go for a ported back enclosure to go with that frontloaded horn ! hornmouth 10 times the size of the woofer-cone-area should do , I'm planning to do something simular with a 12inch Mayhem ... if the prediction of the calculating-program is right its going to be one LOUD mofo !

you just shouldnt be looking at a single 18" ,how about 4 12" ? then the chaos series should be sufficient and there would be more headroom for EQing

There's nothing wrong with the MBquart , high quality build, good sounding amps .

I've once owned an Alpine mrd-m1001 , this was 2ohm stable also ,I've tryed it to run on a 1 ohm load , it gave less power instead of more and heated up really fast ! be smart about it dont try to run it like that , you WILL blow up your amp .

those are completely different drivers , whats there to compare ? what do you want to do with them (box, amp, room)?

when your livingroom looks like a desert because its was to cold outside and desided to build the box inside and right after that the whole house smells like resin for 6weeks because its a good tempretaure inside for the glass to harden (did this in my apartment where i used to live)

cant ypu go to a caraudioshop nearby and listen to those amps ? the RF will draw less current for the same amount of output that all I can say about those options .

VERY IMPRESSED ! good luck with the amp , why didnt run them linked btw ?