Sir-Lancelot

What are you going to be playing that hits that low besides a test tone. Get you some XCONS and tune to 26hz if you want. They will hurt you on the low end.

Call tech support. Mike (good guy btw) will answer your questions.

I have uof my good friends learned of it on a Subaru forum and told me about it. Is it safe long term? I do not know the answer to that. He has done it and it's been 5/6 month with no problems. I am in the same boat as I want my alt to charge higher like it does when cold all the time. Currently it charges 13.6 hot and 14.7 when cold. I am going to try the VCM from XS Power personally. It allows you to set a voltage and keep it there. I hope this does the trick.

I have verizon, but get a 35% discount from my company. I had Sprint a few years ago and it was bad. As long as I was in a populated area it was fine, but once I hit a rural area it would roam or have no signal.

I was starting to think at 39 I was a grandpa on SSA, but oh hellz no....Thanks to 383cutty I am a kid again. lol It's hard to grow up, I just dont think I am cut out for it and you Sir have given me new hope that I never will.

Damn what a poll. Seriously man, do some reading then ask some questions.

looking good! Keep posting those pics.

Word of advice, it will take a little longer, but it will be worth it. Dont get in a hurry they will get back at you. What did you get?

Get the kicker, thats a good price.

A 15 with the correct volume will have more output then a 18 in a box that is too small. Obviously a 18 vs a 15 both in the correct volume and port area the 18 would win. If you want someone here to help you, you are going to have to provide answers to their questions or there is no point asking the question in the first place. .

OMG that is crazy. 146.7 @ 25. The new icons look very sexy. Nice build.

you too fast.

Damn you Jay-Cee. LOL!

Do you even know what the box is tuned to? I would think twice about buying a prefab box. You could have Lowes make the cuts and glue together a nice box designed for you BL's and it would cots less. Bad idea, IMO. As far as amps, whats your budget?

Sure regular wood glue will work. Anything like elmers, tight bond, etc. designed for wood working is your best bet. The bond will be stronger then the wood.

looks good man.

One thing that helped me on the roof, was the addition of some dynaliner foam. I used dynamat extreme in the center of the big metal roof panels, added expanding window foam to fill gaps between the rear ac vents and stuff attached to the headliner, and a layer of Dynaliner foam between the headliner and the roof. It made a huge difference. I was amazed at how loud the headliner actually was and the difference it made in the overall SQ. Once you start taking things apart you will see what you need to remove, just go slow and dont force something off. If it's hard to pull something is holding it. It will drop right off once everything holding it is losened.

Jig saw works just fine for me. Use the highest speed setting and go slow. I cut a board about 2" wide and put two screws in it half the diameter of my circle and etch the board by going in a circle with it. I cant see me dropping a bunch of cash on a router just to cut a circle a couple of times a year. Would be a different story if I would use it because it does make a nice cutout.

Looks nice man. Damn loud for 1 15.

Huh?

Icon and xcon have similar box requirements so you should be good to go. congratulations on your purchase you are going to love the xcon.

Sealed. You will love them.

"I'll tell you what I'd do man; two girls at the same time." Sorry watched Office Space at lunch. 2 Docns or the SA12's would make you happy, flip a coin.

Bang on it man. The break in time just means it will loosen up (like jay-cee said) and will get louder and sound better as the suspension loosens.

LMAO @ censoring one of the tabs in your internet browser. What kind stuff you looking at Shizzon? LOL.