emh9009

A day everyone had off?

Anyone in Washington have some free time on sunday come stop by the parking lot behind B&I around noon. About 20 people going so far. First meet of the year! Have some pretty loud set ups going. From a single 12" to 4 18"s!

There is no ETA, it's too far out to predict. I already asked

Compare the SA line which only has a 2.5" coil, to the FCON which will have a 3" coil. Both rated at 600w. Which would you prefer? The one made in the US

What happened? Too large of enclosure? What do you plan to tune to? Remember to get more port area for the added excursion.

I like how simple that amp is. Looks like a small footprint for 2k!

Try 4-5 inches, I know the distance will change the texture. Once the first coat is done, do a few more, otherwise if its too thin it'll be hard to remove in piece. Just did a heavier coat. Looked a bit smoother when i went out to check on the first. Thanks for the tip If the weather is cold you could dip the can into some warm water. But that's what I've seen people do with rattle can spray paints, not sure about this product. That may just be what needs to be done! After drying it was still wasn't as smooth as i want. May take these layers off and start over while utilizing this tip! When I did mine, it was 28degrees outside and it kept spraying like shit. So after each layer, I took the cans and cleaned the tip really good and set them by the fire to warm them up. Worked perfect That's exactly what I did today, turned out a bit better. Not perfectly smooth like i wanted, but it doesn't matter. Even if it does, it's still a cheap way to change the look of your car, add a little protection or spruce up some trim. I'm sure it depends how harsh your winters are as well, and where it's placed.

yeah.. Doing the other piece of trim on my car that needed some help with plasti-dip now!

Nice move. May want to put a note somewhere if you're able to just cut holes for aero ports, if it would change pricing at all.

That's going to be so loud. Trunk lid is going to just crumple up and die..

Looks much better. Now you should get the blue in your FORD emblem black I should be able to do some more of this today myself.

Like the port on the motor picture! Beast of a flange

If it ever stops raining again I can keep going on my trim...

Looks clean. Nice job!

I remember reading that a while ago, thanks for posting. Think I'm still leaning that way, sorry to not help, but bump for those out there that can!

Sick mids! Moving a lot of air. Tempting buy.. Wonder how these would compare to some sundown neopros. Quieter, sound a little "better", more midbass?

Have you read the last page? Notice that nobody has had contact with this guy, and you still want to do business with him? Maybe this has been cleared, but I would recommend going and finding Adrian.D and getting flares from him.

Interesting design, look forward to progress! No more cendo?

Wow, that is a shame..

Try 4-5 inches, I know the distance will change the texture. Once the first coat is done, do a few more, otherwise if its too thin it'll be hard to remove in piece. Just did a heavier coat. Looked a bit smoother when i went out to check on the first. Thanks for the tip If the weather is cold you could dip the can into some warm water. But that's what I've seen people do with rattle can spray paints, not sure about this product. That may just be what needs to be done! After drying it was still wasn't as smooth as i want. May take these layers off and start over while utilizing this tip!

Try 4-5 inches, I know the distance will change the texture. Once the first coat is done, do a few more, otherwise if its too thin it'll be hard to remove in piece. Just did a heavier coat. Looked a bit smoother when i went out to check on the first. Thanks for the tip

Went and got some earlier. First coat on a single test trim piece is drying now. It doesn't seem to go on very smoothly. Shook the can a while.. Think this will smooth out as it dries?

They will not be ratted at 1000 watts. It is tricky, because so many people associate price to power handling ratting. Either way, I call dibs on the first 4 12s in production!

X2 It doesnt matter which meter you test with, as long as you can see gains or losses you should still get a good idea what to do and what not to do.

Looks nice. Now we wait to see that power LED