emh9009

Looks good! Saw you put videos on youtube wondered ,"where the hells is the build log?!"

ok i did it. i with truck off, im getting 12.8. with truck on at idle, im getting 13.5-14.0 but sub all the way up. it is only a little 30x2 fused amp....... so your float voltage is 12.8 idle 13.5 -14 what about at full tilt? able to see what you drop to?

Set it to DC volts. Measure either at the amp or battery terminals, wherever you want.

Trying to figure out wiring with so many batteries, trying to get an even load on each one. How does this look? MS paint FTW!

Belt was brand new, was a little stiff, I guess. Thanks for the kind words OH it was. Don't remember if I said it or not but i still get a LITTLE squeak when I first start it, but totally tolerable! I'm happy, ! I think I'm going to sell the xs 1200, don't know where to put it.. So I'll have 4 TOTAL. Should be here tomorrow, need to make a new beauty panel, quick! Sucks yesterday and monday were my days off. Now I don't really have time to work on anything.

So we just shimmed the lower bracket, bringing the top towards the block more, giving us a bit more room to tighten the belt. That wasn't enough so we grinded just a TAD out of the bracket. Belt is super tight now and only has a very minor squeak when starting the car, voltage is MUCH more stable now. Heard a sub start to fart today, pulled it out and a tinsel lead came loose. Too much power.. need better subs! Hope these hold out 'till the Fcons come out. Just need to be nice to them I guess. Soldered it back up, but it's a little shorter than the other one. Here are a couple different views. Went and got some 1/0 welding cable for a run from alt - to batt - and from front bat. - to rear bat -. Oh, and i've got 3 batteries on the way so i have to wire them up as well. It was priced $2.99/ft so i got 25 ft. Knew the guy from school and he said he cut it a tad long. Turns out a "tad" is 4 feet! so after tax and everything I ended up spending $2.80/ft! Dollar cheaper than the Knu I already have in my car. Wow, wish I did this in the first place!

Thanks Threw in a pic. of a hawt girl holding something... I'm diggin' the colors as well. Need to get some of this into our wire comparison thread once it's released!

Saw this posted on FB and figured I would share (hope they dont't mind )! Lets see the pricing

XS Power XS Flex and XP Flex Power Cable XS Power has a reputation of manufacturing the highest quality and highest performance batteries on the market, and now you can get that same quality and performance throughout your entire electrical system with the new XS Power XS Flex and XP Flex power cable. The XS Flex line of power cable is XS Power’s flagship power cable. It is available in Blue (XSFLEX0BL-50) and Clear (XSFLEX0CL-50) and in both 50’ spools or in 1’ increments. The XS Flex Cable is 100% Pure Oxygen Free Tinned Copper Cable with a massive 4,704 strand count. Just like everything else XS Power does the XS Flex Cable exceeds the industry CEA-2015 cabling standards and is True AWG cable. The high strand count and soft touch cable jacket allows the wire to be super flexible and easy to use in any installation. The XP Flex Cable is the more economical option in the power cable line, which offers extreme performance and benefits at a great value. The XP Flex Cable is available in Black (XPFLEX0BK-50) and Red (XPFLEX0RD-50) in both 50’ spools or in 1’ increments. The XP Flex Cable is 10% Oxygen Free Copper Clad Clad Aluminum (CCA) Cable with a 5,250 strand count, which also exceeds the industry CEA-2015 cabling standards and is True AWG cable. The XP Flex Cable is also designed to be super flexible and easy to use in any installation. XS Power will have the new XS Flex and XP Flex Power Cable on display in both of their SEMA booths (Performance 23512 and Mobile 11209), so make sure to stop by and check out the best wire option for you. XS Power is a manufacturer and distributor in Knoxville, TN USA of high performance batteries, chargers, wire, and accessories. XS Power offers AGM lead acid batteries featuring lead-tin technology, as well as a complimentary line of accessories. Please visit www.4xspower.com or call 1-888-4XSPOWER for more information.

Party time! SSA is goin' big(er)! :dancing:

I had some of the mids. Here is about all the info i have on them. They got loud, and moved a ton! Very distracting while driving haha

I see .02

Try decaf the next time you drink coffee before you take pictures

The 3k at 2 ohms.

I'd rather run one amp, be a little easier to set up!

I think that you're misinformed. Any comp. set is going to sound better amplified than not. Are the crescendos even available? Last I knew they were getting revised, but they could still have some in stock, worth checking that out before anything if you haven't already. Don't understand why you don't think that the IA set won't compare to the crescendos on HU power. You haven't heard them. Online reviews are pointless.

This thread is full of customer service GO FI!

That's killer!

Send him some leftover

http://www.youtube.com/watch?v=ptLT0GnSC94&feature=related Watched this thinking, "ok, what's the purpose to this, why didn't he try to run away or something?" Then I read a comment, "excuss : o sorry officer you knocked my wing off and i lost traction"

The Mediums were more like a Small, so Large is the way to go. Looks like I should have more large soon. Got my shirt today. Definitely a large! Bit too big for me, maybe ill have my girlfriend do some sewing to it.

remember the port and driver displacement.

Damn, that sucks. But you have a good outlook on it, so keep that up!

Can usually find some bravox for sale in the classifieds section. Check these out