emh9009

Yakima? next time im that way ill have to come take a listen!

I'm still interested in the true RMS of the subs though, just 'cuz.

so wait it says 300w rms on the 12" x series on the black friday sale i just ordered two of them thinking they were 300w rms so are they 300w or 250w rms because if they are 250w i think ill need to change my order to something else that can handle more wattage because i have a soundstream rub1.1000d which is 1000w rms @ 1ohm and 800w rms @ 2ohm i was hoping the 300w rms was right and maybe a little underated so the two of them could maybe handle 700w rms You could put 1000 watts a piece on these if you know what you're doing. Be easy with the gain and they'll handle your amp no problem. DONT put 1k watts to one of these, there isn't a reason really. If you have ~700 avail. to 2, just turn the gain down to compensate if you're worried about it. It has an RMS rating for a reason, whether it's 250 or 300.

That would be super sweet if they could do it, but im sure if they could they would have listed it, not just dual 4 If you need a final load of 2 ohm, just have to get 4 I want 1 ohm with 4 subs...

Updated with smaller pics. Another big "Thank You" to Sefugi. This page should load much quicker now, getting your info in a fraction of the time. I'll work on a vid. tomorrow of them.

Eh just a couple little aquarium fish. nothing special. I've also got a 10 gallon in my room. Just tetra fish, mostly.

I don't know if i'm very happy with the way my "pods" turned out for the mids. Aesthetically i dont really mind them, what do i expect for my first try? I now can think of a lot of things i can do differently. Ill try and explain what i did with a step by step process. I had some mdf rings made, and formed one side of them to sit flush on the stock speaker grills, and cut out a hole to fit the carbon's basket and terminals. Put a strip of EBR between the wood and plastic grill, screwed it together from the back, and put some clear coat/paint to prevent any possible water to reach the wood. I then used some CLD tiles to deaden/seal the extra holes on the back of the stock speaker grill. A little more was added after this pic. They were then wrapped in some fake leather lookin' stuff that matched my door's fake leather looking stuff. This is extremely difficult, but i blame the glue for not drying quick enough and allowing slack which caused wrinkles in the fabric. oh well, appearance doesnt matter much right now. The factory speaker baffle has a frame behind that shields from water getting to the speaker, while still having holes and such to let air flow, so i left those on the door. These are screwed/bolted to the metal of the door. I then attached the modified speaker grills to the door, having left some material inside the ring of wood. These places allowed me to bolt the grill to the metal/factory baffle on the door. Only the first picture has been bolted/screwed in place, haven't done that step in the other pics. they are just there to show how they look. From sitting positions... I don't know what to think about them. They work, but i'm just wondering how to seal them to the door, so there is no air movement between the beauty panel on the door and the metal. Any ideas? modeling clay, maybe? Or did i just confuse everyone on what i did?

That day i didnt check the mailbox 'till about 8 pm, when i noticed my tweets showed up the same day. Very nice day it was! Photos galore! Sittin' on the 100.4 i've had for over a year. Super excited at this point.

Mids arriving! No AA stickers?! Carbon fiber, baby!

Nice score, turn it up a bit! the sub looks like it could be moving a whole lot more! prove the 150

IF you're able to, why not? it cant do much but help. unless you're really hurting for internal volume.

all pics. should be a decent size. was much easier than expected!

alright, i'm working on resizing the photos i already have up, haven't had time to do this the last couple days. Probably will have everything done tomorrow, i'm about to go watch my nephew for the night. Here is a test pic. for size reference. This is the size Sefugi told me to use. Looks good to me!

:trippy: The deal is trippin' Mark out lol

And what did you get form Fi? pics! Welcome

They are 7". PM Nick or scott to get a dealer's info. or go to their site to find a dealer.

Wish i had the funds for this. Someday i'll have SSA in my car... watching for the Fcon

Site says 300 rms, is it really 250? Also what will it take to get a belt on my order?

Image shack gives options on the size you want when uploading. 640x480 for message boards is what I always use. If you have questions pm me I'll be glad to help! Sefugi is the man,

hmm i've looked around and cant find much on that. anyone use imageshack that can help me out?

Asked correctly and this site can do wonders for ya'

am i missing something? all i get is a website with the main area saying, "Sorry, no posts matched your criteria."

Truck looks great, man. Love the color. cant wait to see the box being built! SDS FTMFW!

FYI in the kit they will send you 20 ft. of 12 gauge. it's pretty huge.

alrighty, sounds good. and 16 should be fine (i've forgotten what power you're running though..). i would get any rca other than eKo lol.