CrazyKenKid

so i just did some calc again and i got ports = 1.1 box=6.63 jack= .11 (there is a jack in the back) total box volume = 5.42 adn tuning is 21.5 (with a port length of 31.5) so i don't know what is going on can someone please help

well 0.5ohm + 4ohm= 4.5ohm load series means add resistance together and parellel means the resistance will drop to half the resistance on 1 coil and why do you wnat to run a 4.5ohm load anyways? why not a 1.5 ohm load?

nice amp! it almost looks a little under rated! http://ampguts.realmofexcursion.com/PPI_PC1800.2/ post some pics of the guts!! but sorry i don't know of any shops in that area!

oo i understand now! thanks a lot Duran! thanks again!

So i have been looking at forum posts lately and i have come a across a word a few times and i don't fully understand it and i was wondering if someone could help me out! the word is "going active" like what does that mean? i have heard that before in movies but when i hear it, it doesn't mean anything good. so i thought i would just ask a noob question and maybe get lol at or be the bright point in someone's day!! thanks for helping Kenneth

i don't if the 100.4 would be a good match but i know that my 100.4 makes a KILLER match for my zapco RB13.2 and RH16.2!!!! I assume you would be impressed with the output of the amp, everyone always is!!

Hey guys i need some help with box calculations for my buddy! here is his box dimensions i keep getting 4.6cubic at 28hz...but that sounds pretty wrong to me can some please help us out with this. The sub box is for a kicker L7 15inch sub. this sub box will be going into a S10 right behing the front seats which is why the box looks kind a funny! and yes that is 2 L shaped ports. thanks in advanse for any and all help!!!!! Kenneth

of those ppl who voted yes which line driver (s) do you use?

i can't answers your questions about the 4channel amp b/c i just set mine by ear which isn't the best way but it works! as for the mono amps i like to use 50 or 60hz at 0db, for the h/u i leave bass boast off and i leave my bass settings at 0. as for the volume of the h/u i set mine to 33 out of 35. i will usually listen to my music at 30-33 and if i want a little extra pounding i just turn the volume up some more then i follow my nose!! i hope that helps and also for setting my gains i leave my car on and i unplug my sub!

how about the xs power master 5100 or the 2700! also how much hieght can you fit under the hood? http://www.soundsolutionsaudio.com/store/search.php?search_query=powermaste and http://www.4xspower.com/audiobatteries.asp

wow! a lot of info there to absorb lol!! thanks for posting that it cleared things up! i guess i learned something new today! score two points for the good guys (sundown)

THANKS! That was the type of answer i was looking for! Getting the battery! that was quick!! and painless eh! lol!!! battery power FTW!

Sorry about the excessive comments but thats where im stuck at. If i might have to get a bigger alternator then why not spend the money that i would be buying a battery with on a alternator? well you are asking if i am going to need a bigger alt in the long run why not just got a bigger alt! well how about lets look at this mathematically for a 2000rms setup at 1ohm your amp will need like 45amps. but 2000rms/12.8volts = 156amp draw! so if your alt puts out 150 you will be able to supply the demand. is that correct or did i screw something up? i will just get a big enough battery to support my system. right now my setup is 1 15inch ns 2- batcap 2000's and STOCK battery and STOCK alt (105) and a SAZ2000 pushing all it is worth. my lowest voltage i have read off of my stinger volt meter is 12.8volts at full tilt after playing a full song.

ya a 135amp alt is already pretty beffy just get a new battery and see how it all works out! and if your system starts to have voltage issue then reconsider a bigger alt, or maybe get a missing link!!! http://missinglinkaudio.com/

to make a ported box i just use the RE calc! http://www.reaudio.com/speaker_box/LPort_Box_Calc.html notice the red number! you can highlight and delete those numbers and input your own numbers! also to find out port length you can use this site! http://www.the12volt.com/caraudio/boxcalcs.asp hope this helps out some! also that RE Calc isnt' the best and is out a few hz or so ppl say! but that is what they say!

why thankyou! actualy after i got done the post i was like umm should i have a sometimes there! thanks though!

So a friend told me about line drivers and i was wondering should i be using one? is the advantage they offer that great? and why would i need one? like if i run a dmm over my rca and they are getting around 1volt should i be using a line driver to help out my rca so i don't have to turn my gains so high? also do i need one for all my rca's (fronts, rears, subs?). also do yo use one? And if you do use one which one do you use? Kenneth

awesome! thanks man for sure i will look into these guys! i wonder if they ship to canada!

wow that looks nice!!! are those a pair of xs power 3100 i see there? also i love that box!!! very nice job keep it up!

nice site to get alts from! those prices are pretty awesome!! i might pick one up for my 95 grand am!

and the SAZ line up is build like tanks!!

well if i am wrong i am sure someone can correct me. your battery under the hood can only support a 850rms system, but if you were to get a 2000 or 2400 (i would get the 2400) you could support a 2400rms setup!!

get the 1500! those bad boys are so under rated!! it does 1970rms at 12.8volts!!

Wow nice install man!! i like it!! question though i thought mounting the amp(s) on the box like that was a NO NO? but i could be wrong! again though very nice!!

nice findings!!!