CrazyKenKid

and no your DMM is a nice DMM don't bash it. just once you learn how to use it you will be good to go lol! at any rate switch holes and report back! (lol that sounds bad) and I purchased my DMM on ebay for a good 60$ used lol! it does me well! it has auto range, which means it will find the range that works best for my situation, in your case you have to pick 200m,2,20,200 mine does it for me.

I know how you feel! lol! well you did in fact plug your dmm into the amperage side which is what i thought you did and you might have blown the fuse in it but! but all that aside fuses can be changed! all you need to do now is put the red wire into the red hole on the right hand side where it says V=volts since you want to measure volts right! and not DC amps (left red hole) and remember a dmm just simply measures nothing else it can't kill your amp! but a light show is always awesome!

big block 550, making around 700~ hp at the crank the only down side is it is about 4000lb's! lol good Ol solid steel lol! although if you know your coupes on this one I dropped the roof about 6inch! which I think makes it look more bad-ass lol!

here is what my DMM looks like! please note there are also 2 red holes one is clearly marked with a big A on it (which refers to amps) and the other one has the ohm symbol, the volts symbol and the diode symbol and some kind a continuity test thing! http://www.amazon.com/Fluke-117-Electricians-True-Multimeter/dp/B000O3LUEI and of course the black which is refereed to as the COM , or common or ground!

interesting! for starters what is the make and model of your DMM (digital multi-meter) also where is the RED plugged into? which RED hole? I assume there are symbols above the red holes!

so another update lol I am currently looking for 3ft of Raptor, Install bay, and Shoc 1/0 wiring! if anyone has 3ft of those 3 wires listed I would be interested to buy them off of you so please post here or PM me and we can go from there! again everything is coming to canada and I am still waiting on shipping for all suppliers so ppl please hold on for a little while more!

I got both coming to my house!

160 on a 1/4 mile! here is a little burn out for you guys to watch in our tiny drive way

well put there sir!

A kid? He looks like he is in his early 30 ish although I have been wrong many a time

Is that a pic of Kevin? And mark what the Heck? Looks like he wants to fight him

what are you going do? believe him at face value? I know what everyone else would do but what would you DO? I know I would ask him for a time line and what is going to happen. also i would bring up the fact that you contacted UPS and you heard a different tale! put it all on the table and see where it goes. this is what I would do to be the better/best man and then based on the fact he gives make a choices! but that is just me and i am crazy! lol

wait they gave kevin options? as in it isn't our fault eat it? or get sued? wtf? what options can they give him since the claim was denied? and yes i know you most likely are not allowed to know but what options does he have lol! also for you ya that isn't good/cool and i feel for you. I hope this gets fixed.

Damn, he's good. that is what she said! but ya man you need to act and maybe bring this to marks attention which I think he may already know about...

See I told you to make sure and double check! it is what I would have done! let us know what you find out! now i am on the edge of my seat lol!!!

He's at Kevin's mercy, what good would it do even if he did call ups... umm just to confirm what kevin is saying? that way he could move ahead with the paypal claim if kevin is trying to scew him?

umm could you just call UPS to confirm what he is saying? I know I would! or have you already confirmed what he siad to yuo?

what the heck is going on? so the amp works? but does the amp have an output? how do you know the amp works? Do you HAVE A DMM? if you have a DMM plug it into the speaker outputs on the amp and put the dmm into VAC (volts A/C) and see if the amp is outputting any thing. also hook up an MP3 play to the inputs of the amp to make sure your sub isn't dead. now what LOC do you have? please take a pic or send a link! also how is the remote wired on the amp? I suggest you just run a wire from your battery to a switch then to the remote of the amp that way your amp will turn on when the switch is closed.!. that way you can avoid the remote on the LOC since you can't figure it out? and yes this forum does have a lot of traffic you just have to ask the right question and do the trouble shotting. and put a little more effort into things! rather then saying I have issue help me lol provide as much info as you can and also answer questions which are first asked

We are all on the edge of our seat! Not me sefugi. Too many beers last night and I slid onto the floor. Been there, done that! em there doing it, ,.

anything?

okay so you have your yellow wire on your line out convert hooked up to your bose remote wire? I assume the rear speaker are working when everything is on. do you have access to a DMM? if so please check the voltage on the power wires going into the amp make sure those are 12volts. then turn on the system and check the blue wire to make sure that wire is also 12volts. once that is done report back with your findings!

That one is easy. If it isn't designed to only run on premium you should never use it. lol good answer! o wait is that why my car runs like garbage when I put the GOOD stuff in lmao! jk!

when I did a trade it went like this. he sends you stuff first then you send him stuff once you recieve his stuff! the guy I traded with didn't have to many reps and ppl to back him up but i did and i convinced him that I wouldn't' screw him over if he sent first. I traded him an orion 2500 for a kenwood flip out headunit. long story short I got my h/u no issue there and he got the amp! so we were good and Now i will be a good reference for him in the future!

it wouldn't look dumb if you had 1 on each side lol! then it would look like horns lol! jud i don't know from toronto here is his site, if you want drop me an e-mail and i will hook you up with jud! http://www.nightmareaudio.com/ and here is the box he made up for me! it isn't to loud but it hits everything with +/- 1db from 30-65hz~ something like that. i don't remember off hand but i wrote it down somewhere and those shades are SPL subs lol!

how about extending the aero ports out side of the box! i thought you had room to do that. although i could be wrong. you know if you want a professional box made up for you ask Derek about his our buddy Jud over at nightmare audio! he hooked me up and my lows never sounded better! no seriously talk to Jud about it!