CrazyKenKid

Hey guys I am looking for a total of 2- Sundown stickers. I don't really know where to get a hold of them and i know Jacob is a busy guy so I just thought i would post here! i guess if someone has unused sticker they don't want to use send me a p/m. thanks Kenneth

I had been running 12-volts for a while since I took the 16v out last time... basically seeing what I could do on 12v. Now that I feel like I maxed that out I went back to 16v. 16v ftw ;p!

nice video man! question though what was the first song playing in the first few secs of the video? correct. Im using the Eclipse Ea4200 which is rated at 60watts rms by 4channels my speakers in the front are Kicker Ks 602(75rms) Components and the Rear are Kicker Ks502(65rms) Components and sounds very clear. Since i brought that amp in March i got if for just under 200 now its going for just over 100 new on ebay would my highs be able to keep up with my setup?is 2 ssa icon 12's on a audioque 1200 so 1200 watts rms. thats a good question the bass would most likely drown out your highs but it depends on your eq settings I know when i have my 15inch kicker cvx it drowns out the words but with this Re Audio Sx 10 i have it doesnt but its all on the system settings. heres an example of my system.

x2 budget will determine everything!! good call!!

so wat u sayin 2 sundown z15 wow and by z15's i mean sa12's lol!!! but i am just a sundown head! for some reason you siad duel 12's and i jsut though about 15inch subs lol! sorry my bad!

there is a good start! 2-yellow tops big 3 and a ~5.355 cubic box~ nice plenty of volume! now tuning! try 35hz's and go from there! you want to go with 2-12inch subs! i would say go with sundown z15's!! and then get 1-saz2000 lol! lol but wiat for some other ppl to chime in who MIGHT recommend the xcon or icon subs for your type of music!

so what was the purpose of the 12volt batteries then? jsut for kicks to see what kind a numbers you could get on 12v's compared to 16-18volts?

i think the first thing i would do i had to do it all over again would be: 1. car electrical ---big 3 in either 1/0 or 4/0 2. set my goal (daily or comp) 3. look for a sub which met goal number 2 4. get an amp to match goal 3, if not doulbe the power for future application 5. pick a battery (or batteries) to suit everything 6. sub box design 7. get advice! something along those lines! also find out how mcuh space you have to work with. like if i have a 7cubic truck you can fit like 2-15's inchs for example or if i own a hatchback or watever!

o so you are starting fresh!! nice!! and the saz2000 is actualy 380~ SAZ-2000D Refurbished [sAZ-2000D] - $382.50 : dB-r Electronics, Online Store there you go! also i think he has some 1200d listed on there also for under 200~ and a saz1000d for under 200$ also!

SAZ 1000d!! or a used saz2000! what kind a system you wnat to run? goal? car? sub? any mroe info would be awesome!

remember also shops will try to push a certain product on you so they can reach their quota! like sundown is an internet kind a deal and if they tell you sundown is better they benefit nothing! but if they tell you jl is better and they SELL you jl product then guess what they get a cut of that money! remember the main goal of any establishment is to make money/ profit! if you can't, well you know what happens! but like jay-cee said it is based on your preferance, buget, and goals!

are those sp1700 16volt batteries? and awesome score btw!!

so should this get movied to the sundown technical? even though this is a discontinued amp?

sorry SBN? sundown audio? if so i like the original ones right now. they aren't very fancy but they get the job done and thye are stylish! llol

looks good/awesome! keep up the work!

LOOKS AWESOME!!! keep up the good work man! very clean! i like!

wow that is really strange! Questions have you ever hooked up the speaker via wire rather then use the rca's and an amp? i know it sounds odd to do but if the noise is coming from the h/u or engine it would still be there if you run the wires. so what i am getting at is just hook the speaker up to the h/u as a quick test to see if it is still there. Also is there a way to turn off/on the internal amp on the h/u when not in use or in use. I know on my h/u I can turn off the internal amp (in the h/u) and odd-ly enough it does sound a bit better. but I don't know about this case as it is clearly not a simple fix,... have you tried praying to God yet? lol (no offense intended)

I have ran 2krms off of a stock battery and stock alt. BUT i also upgraded to 2-batcap 2000's in the trunk to help me out! so stock alt, battery plus 2 batcap 2000's to run my SAZ2000 with minimum issue at all! my alt was pushing 5-6years so i ended up not chancing it and i just replaced with an upgraded stock alt (200amp alt) and my cars original battery nearly 7years old i also just replaced that b/c i would hate for it to die and my batcap2000's being the new and only batteries in the car. Other then that just bump responsibly and get a volt meter!! p/s i also did the big3 it helps out a LOT

sorry you said it is not the h/u? did you swap h/u to make sure of it? sorry if you already answered this. I know i had the SAME issue with my car for 2years straight and i did everyhtin you did to the T and the noise was still there and very annying. i changed rca's grounds i used groud loop isolators i did everything the works and nothing worked. i got all the noise you had when the fan was on when the engine was on when i was speeding and everything. then i purchased a bnib h/u and BAM all gone and never retured (knock on wood) and i didn't change a single thing jsut JUST the h/u. but i don't know about your b/c it sounds 100% like my issue back in the day of my PIONEER H/U!!!

so are you going to run active or passive? like ku40 said which dials do you need help with? leave your bass boost and subsonics on off if that helps, and the gain you set via ear then turn it a little lower just to be safe.

unmm i think he is asking how does this amp proform, he is looking for a review from someone who might have used this amp or maybe another soundstream amp. i have personally never used one mainly b/c i am scared of spiders like yourself! but i am sure someone on here has used this amp brand and maybe this actual model you are intersted in! from the pic it looks to be pretty beefy, and yes it would seem that it accepts 4gauge wire so you would ask yoursefl, self can this amp do what i need? or should i maybe invest in some 1/0 to 4awg reducer to ensure it gets the power it needs!! lol!! but hang tight i am sure somone has used this amp before!

lol the same thing happened to me when i installed my stinger voltmeter! and for some reason the cover fell off and i was like hey check out this screw in here what happens when i turn it! turns out i just got lucky and stumbled across it! lol!

you are asking what kind a current will the mrd-m300 pull on 14.4volts? well i think i need some more info, like how much power is it outputing or what is the ohm load. if you recal to find current you need voltage and resistance and that is ohm law! I=V/R and also I=P/V or Root (P/R)

so should this get movied to the sundown technical? I have been looking for this thread for about 2hours now and finaly after all my looking i found it lol!! i was looking for it b/c a buddy told me rms does NOT equal louder and i was like yes and he asked me to prove it and i was like okay! give me a few minutes whihc turned into hours lol!

no you can NOT get a 1ohm load! please view the link below and book mark it for future reference! and enjoy your holidays! http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=2&I=22