CrazyKenKid

I plan on installing 2-NS15inch v1, getting powered by 2-SAZ2000's at 1ohm! in a 6th order bandpass box! and deaden my car as much as i can! then once that is all done i plan to get tl metered and see what i can do and tweek away! I also WANT to get a pair of ID horns and maybe a processor/crossove and see what happens!! my goal is to hit 150!! hopefully but we will see what happens right! but nothing is going to happen till the cold weather goes away! Merry Christmas to you and yours and happy New years also!

umm 4! if they are all duel 2ohm subs! http://www.the12volt.com/caraudio/woofer_configurations.asp?Q=4&I=22

you can hook as many as you want!! now how about some info? what sub? what rms rating? what coil config? umm any other info would help out!

o and the best part is these subs only cost a little over $100 each!

time to pull out the ol TL and see the true number of 123.4db lol! sorry didn't mean to thread jack!! but congrats on the 8inch doing over 150! truely impressive!!

my s10 it has 167.8 db's with 2 jl audio 12'' subwoofers in sealed boxes a jensen pro 400 watt amp 200 watt jensen cd player this truck has been completely customized lol that is what he says in his info section!!! llol!

....okay interesting you say that. current-ly (pun intended) i have 1 run of 1/0 wire with a 250amp fuse in it from front battery to rear batteries, then from rear batteries i have a 200amp fuse going to the amp! so your recommendation is to upgrade my 200amp fuse to a 250~300amp fuse?

i would also recommend sundown audio as they are very reliable and have superb customer service plus they are nicely priced! and look sexy! lol! and they do way over rated power in most cases!! please check this post out to see what kind a power you can expect to get. also worthy of note sundown amps are unregulated and all those in the link i posted are on 12v's so at 14volts you get more power! now you asked about a h/o!? this stand for high OUTPUT alternator! the h/o can output more current to your battery (s) on lower revs. plus they have superior cooling. all great systems need a great way to charge back up to full power or you will kill something!!

or ask this guy Flipsid the guy who did the 12-18inch build! i am sure he knows the displacement.. maybe lol!! but jacob is yoru best bet!

nvm

for the 15inch it is .4 displacement and 9.75 mouting deth i thought the same motor was used on the 15 as the 18! but i could be wrong! and i also used 2inch beind the pole!

you pay for music...what is wrong with yuo? lol! jk! paying is good!! and legit! illigal is bad!!

damn skippy this sub is killig your old ns v1! and making me think i should have waited to get a pair of ns v2! loL!

x2 but i prefer Knu wiring due to the flex and tuff jacket!! but whatever is cheaper always wins!

old school ftw!!! keep it all old school!

LMAO i didn't even see that!! lmAO love the smell of burn voice coils in the morning!!! lmoa!!!!! i want one!! lol!

hey jay-cee this is your 3000 post!! congrats! sorry for the hijack! i thought i would point that out!

i don't know if you got around to reading these review but here are some that other ppl siad about it! http://www.teamrocs.com/reviews/processors/basscube.html and http://audioforum.termpro.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=19;t=000158;p=0 i know it is vs, but they still talk about it!

looks like that board is missing a few things!! lol!

FLAC ftw!!! 1700kbps+ your mom ftw!! lol! jk!!!

thanks again ////m5 for your reply! i will look into these and try to gain all the knowledge i can about a process and do all the planning i can to make sure i dont' screw it up and i will not end up as just another failure lol! thanks again everyone who chimmed in !! Merry christmas to all! and a happy new years also!! thanks so much guys!

Just in time for Christmas lol!! they look nice! and did you jsut void warrrenty by removing the cover? lol jk!

i am looking at this site http://www.crutchfield.com/g_168450/Sound-Processors.html?tp=84 and are these what you are referring to ////m5 if so can you recommend one you have used/heard of one in the present/past!? thanks again!

you don't know till you try! lol! jk! almost any amp cna handle a 0.5ohm load PROVIDED it isn't for a dialy setup and you have the electrical to back it up!

so using a processor woudl be ideal to tame the horns you recommend? any name brand you can recommend? like alpine or pioneer, are the first 2 that come to my mind. or are you thinking about a 3sixty?