thebiggmann12

we are definetly down for that....once spring breaks loose and the weather stays in our favor, our cruise strip is ftw, you gotta come chill with all of us on a weekend.... with out exagerating, there can be 40 to 60 cars out there.... all kinds..... it is a big thing here in Indy. the mdf is .75 , just looks bigger i guess. chop 40-60 cars? thats badass...there is barely that many people in my chitty town lol...ill def have to pop down there.

fail x3

lol fail again.

lol fail.

i've also heard that the rf amps are rediculously unefficient...while the sundown amps are very efficient.

lol thats what i was thinking...most wont b seen and i would hope people are more interested in ur bass than ur wires.

161.1 at 34hz...

i say just find the easier stuff to find and use what u already have and then what u will be getting. just my .02.

sweet! what r u covering it with? or are you leaving it all-natural

my lowes doesnt carry mdf...gay. and the menards said they wont cut sheets of wood...its to difficult and time consuming...exact words.

lookin great. im gonna have to meet up with you guys once you all get ur systems rollin...i finally got my license back so its time to check out some other peoples stuff. whats the thickness on that wood? looks thicker than 3/4

why they hell is that shit so expensive?

go with the bls...especially with that much power...the qs will blow, they arnt meant to b loud, they are meant for sound quality.

get the btl fully loaded, it will give ya some breathing room. also, u dont have to run all 2600ish watts to the btl...i would stick around 2k.

to the op...ur best bet is to build a new box for that btl that is the correct size, and then see if its not loud enough for you...chances are it will be.

im pretty sure u will need a full recone...email jacob at [email protected]

a pair of sa-8s would probably sound great and get loud as hell too.

post a pic of the area so he can help u a little better.

that looks sick as hell!

if that sub is a dual 2 it should be reading about 2 ohms per side...or did u test it with them wired together?

looks great!!! make sure u get the vids and pics up ASAP! lol.

if ur are going to be putting a clean signal to them then put the btl in a box that is closer to the minimum size than the maximum size...that wattage isnt necessary, but if u must then go for it. u risk blowing that sub sky high tho. i promise u that off of 1 amp and a strong electrical system, and a correct sized box, that btl will get loud as shit. the l5's have more cone area but u probably wont hear any difference being that the btl was made to get LOUD! i would stick with the btl especially since u already have it. build a new box, and then decide if u want something else.

they are rated at 600 rms which is where u will probably want to stay. get you an sae1200d from the ssa store and u will have a bangin setup.

wish i could afford to have u do one for me, or at least be able to do it myself, my boxes suck.

probably best to stick to the rms, u wont gain much audible sound if any at all. stick with 1. u will be happy, get that btl in a bigger box bro for sure.