Shogen

Rhino liner...

Yea, trade in that used equipment and try out the Skar in that enclosure...

Wish I wasn't so happy with my Icon... I'd sell it to you... hahaha.... Icon would def give you better sound and would be fine in that enclosure as well... Most likely similar diameter cutouts.. Cubes is recommended to 2.5 cubes I believe so you'd be close in spec...

ouch!... lol

nice... haven't seen many old school cars with customer work...

The rust is fixable.. I can just replace the screws and hold downs if anything.... And no it wasn't in a boat, it was in a Miata that was stripped down to bare metal, no door skins or panels and I am pretty sure he had leaks in the doors but didn't care...

Oh how I love thee! ... lmao... So yea, if I can upgrade them I'd be willing to or at least replace the "shitty" one..

This is the good one... There is nothing on the backside so I didn't take photos of it...: This is the damaged one... It is missing the capacitor in the lower right corner:

Nah I knew you meant the ones that came in the set.. I took some photos but it doesn't have much on them...

I was thinking that as well... I think I need to wait for a reply from edesign before I make a decision on that. I have one good crossover so I could purchase a similar capacitor and solder it in place... Any ideas on that part? Should I take some photos of it for you guys to look at?

This is the crossover section for my BA amplifier... I think it should be enough to run the woofers or tweets... Let me know...

I wasn't gonna bother with them unless the only option was to try and get another crossover... :/ .. But I have read alot of bad but I have had a few good experiences with them and my buddy who had purchased these speakers loved their stuff too.. My biggest things is, how the hell can I find the crossover points? I emailed them a little while ago so I don't expect anything until maybe Monday or Tuesday... In the meantime, how could I find out myself? Also I did a "ohms" test with my dmm on the woofer and the tweet. The woofer came out to 3.1 -3.4 which I guess means it is a 4 ohm driver.. The tweet was 3.6-3.8 which would mean the same thing... Is that right?

ah that makes sense heres what i got sitting, waiting I have purchased that same wires from ebay... Didn't work out so well for me though... I was getting voltage drops... I wouldn't even use it as speaker wire because of how flimsy it was.... Hopefully it isn't the EXACT one I had/have sitting here cuz it was a waster of my $30 dollars... lol

Is there a way to find out from the crossovers themselves? or is it trial and error??

http://www.edesignaudio.com/product_info.php?cPath=1_23_127&products_id=617 System Type 2-Way Frequency Response 40Hz - 20KHz System Sensitivity 89dB Final Impedance 4 Ohm I currently own these 2 amplifiers: Boston Acoustics GT2125 Sundown SAX 100.2 One of the crossovers is damaged so it cannot be used. What could I do? Could I possibly run the tweets off the BA amp and the woofer off the Sundown amp? Other suggestions??

they look the same to me... but i could be wrong...

schweet!!!

Cubic feet in your trunk??? Do you have enough room? AFAIK, 1 12in SSD or BL would require 2.5 cubes, not including the port... So you need double that. Does your charger have the room?

I'd go ported as well, for first system... I usually went sealed but I have my first real ported enclosure in the works...

First system and you're going bandpass? Where you getting this box from or are you building it?

I'm sorry, are you saying out 220a alternator is only outputting 74a??? WOW that is F'd up man! needed...

Audioque... a car audio brand... Audioque's Website

Awesomeness Swagga!! Are you a carpenter?? Cuz HOLY SHIZNIT that looks great... Kerf executed fantastically... Now you can build me a fancy box too... YIPPEE!!

I heard it was the GHEY part... But that's just what I heard...

Why are there socks below your "test fit"??? You nasty freak!! Now hurry the hell up!!