Everything posted by vladd
-
Welcome to the IHoP
i really wanted to bust out a sig figure remark in that thread too, i know he's going to say he can keep his room within 1degree. by that definition there's only two sig figs so any spl testing would have to be rounded to 130, 140, 150 assuming that temp comes in to play when sound moves through air. :-D
-
Hi, I'm Blake from eCrack.net
post the link How can I prove myself when you don't give me a chance? This is an introduction... not a review. Also, you ignorantly ignored that I am not merely going to test 2 woofers in one box. Each woofer would go in a range of different boxes. Had you visited the site, you would see the subwoofer testing methodology. Unfortunately for you, you want to remain ignorant and very rude for no apparent reason. Really? THen how are you still here? All you have been doing is acting high and might... like you are the gatekeeper or something. So far you just sound like an angry wannabe. Also, I'm not a bit concerned about your online personna. You're just another fanboy of the "leet" guys out there. I've seen a million just like you. you've posted how many times and not given us one good reason to respect you? list of accomplishments, anything?
-
Welcome to the IHoP
he struck a nerve with the only changing one variable thing.
-
Welcome to the IHoP
in and out in 20min would be awesome, lately i have about 30min at the gym and that's it.
-
Hi, I'm Blake from eCrack.net
I want to see his temperature and humidity controlled room since he's convinced he's going to only change one variable.
-
Hi, I'm Blake from eCrack.net
First off someone has tested woofers in that manner before, most of the ppl here already know about it. secondly, i'm sure they have more experience than you because of the way you talk. Nothing personal but you haven't stated a single thing so far that would make me want to read a review by you. yes different woofers have different displacements, anyone should know that. Different woofers also behave differently in different enclosures so it's not very fair to test them all in the same one. yes you eliminate your one variable but since the t/s parameters are all different that's a bunch of variables that aren't eliminated. Last, seriously telling me to stop before I look worse? High and mighty won't fly here either, you come to a place that you think is filled with people that need your new ideas of testing when it's all been done before. I assure you i don't look bad at all, though i could use a shower after hitting the gym. I am quite flattered that you're concerned for my online persona though.
-
Hi, I'm Blake from eCrack.net
And let me go ahead and say you'll find yourself received much better if you don't come in telling us how you know better than the ppl here. just because we have screennames and hide behind a computer doesn't mean that we don't know what we're doing. trust me we have people here that have more experience in audio than you, and we have people that have access to better testing supplies. I realize i come across like an arseho, and i am, but i feel it needs to be said so that you can settle in here before everyone gets a negative opinion of you.
-
Hi, I'm Blake from eCrack.net
So tell us why you know better than most? I learned in elementary school that when you do an experiment you should only change one variable. of course once i came to this little not well-respected college they taught me that was crap that you'll almost always have other variables out of your control for one reason or another. I suppose you're talking about a big test of woofers where you get a bunch of say.... 12" woofers and then test them all in the same vehicle or vehicles with the same enclosure or enclosure....man i wish someone would have thought of that earlier. if they had they could have done it with 8s!
-
Orion 2500D schematic
i can't remember the name for the life of me but there was some guy in Tx that repaired amps that specifically repaired a 2500d. i'll see if i can find him, he was on one of the forums, diyma, eca, something.
-
Hi, I'm Blake from eCrack.net
So you're not trying to sell us on the idea of this website?
-
Welcome to the IHoP
when i suggested the fitness forum back in the day i suggested it be stuck in with the off topic stuff, right with the hop would be fine by me.
-
Hi, I'm Blake from eCrack.net
Welcome aboard, but i must say you sound way too much like a salesman for me to buy what you're selling.
-
enclosure help
you may be able to do two 18" Qs sealed but you'd probably be better off with a pair of 15s or 1 18 (ported)
-
recone kit for Avalanche 15 needed please!
[email protected] explain what you need, they'll let you know if they can hook you up. But be patient, they don't just have dozens of these things sitting on the shelf waiting for you to order it.
-
DVA-9861 + Processor.. Help/Advice
yes you can run the 701 with the optical to the HU and RCAs from it to the amps. it will give you more flexibility than you will ever need if you're running passive components. if i were you i'd either go active or sell the 9861 and get something else, honestly i think the 701+9861 is serious overkill
-
Welcome to the IHoP
too over the top for me, i appreciate that it's one hell of a car, but wouldn't own it.
-
Is this amp really just 2500 watts?
i know the lower lines were a bit underrated, but i wouldn't expect it on that one. I also would not dare run that one at 1/2 ohm, i've heard of a couple blowing at that load. The model before that (chrome model) was stable at 1/2 ohm and very close to it's rating, 1200d usually did about 1400W and the 2500d was around 2600 if memory serves.
-
Blown....
if you want to run hifonics you should run a sub that's the same quality, fi doesn't offer any of those. That's just my opinion though. If your dad is giving you chit then tell him to grow up. explain that he should have given you enough money to get a sundown 3000d and BTL or two. The failure of the sub was your fault, not the subs, and honestly not the amps. if you wouldn't have clipped it the sub would have lasted forever. Get the power up to about 1000W and set your gains properly and you'll not have any more problems. With your hifonics you weren't giving it enough power for your taste so you turned it up above what the amp could do, it clipped and killed the sub. The Q can take way more power than you've given it, but it can't take a dirty signal. I have personally thrown 2x the power at mine and it handled it just fine.
-
Welcome to the IHoP
fudge metal gear how did i ever play that back when i was...8?
-
Welcome to the IHoP
aced my aquatic ent lab quiz, not sure how i did on the biochem quiz, there was a few tricky questions.
-
New Car!
wouldn't the tara labs wire be worth about as much as the car??
-
Welcome to the IHoP
well i'm not 100% better today but i'm definitely no worse. kudos to airborne
-
Welcome to the IHoP
happy birthday and goodnight
-
New Car!
pshaw do routine maintenance yourself. nice car, look forward to seeing what you put in it
-
Welcome to the IHoP
that was a joke, dramatic pause is hard to accomplish online